···
Log in / Register

Why is the fuel consumption of Trumpchi GS4 so high?

1 Answers
EllianaLynn
07/29/25 6:48am
The reasons for the high fuel consumption of the Trumpchi GS4 are as follows: 1. Temperature fluctuations affecting fuel consumption: Generally, in winter when temperatures are low, fuel consumption increases, almost comparable to fuel consumption when using air conditioning in summer. This is because lower temperatures cause the engine to dissipate more heat. 2. Prolonged lack of vehicle maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil results in poor lubrication, increasing resistance in the engine's moving parts and requiring more energy to overcome this resistance, thus raising fuel consumption. 3. Spark plugs needing replacement: Spark plugs are often overlooked. Even if they can still function, worn spark plugs may cause delayed ignition due to insufficient energy, missing the optimal ignition timing.
Was this review help?
4
0
Share
More Forum Discussions

Should the clutch be pressed with the toes or the sole of the foot?

Press the clutch with the sole of your foot. Using the sole provides a solid, powerful, and large contact area with the clutch pedal, making it easier to control when positioned towards the front half. Here are specific details about the clutch: 1. Location: The clutch is housed within the flywheel casing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Function: The clutch is a common component in mechanical transmissions, allowing the drivetrain to be disconnected or engaged at any time. Its basic requirements include smooth engagement and quick, thorough disengagement.
17
1
Share

Why Does the Car Air Conditioning Suddenly Become Hot?

The reasons why a car's air conditioning suddenly becomes hot are as follows: 1. Compressor capacitor failure: For the air conditioning to operate, both the internal and external units need to work together. If the car air conditioning suddenly becomes hot, check if the external unit's compressor start capacitor is damaged. If so, it needs to be replaced. 2. Dirty filter: If the air conditioning has not been cleaned for a long time, it can also cause the air conditioning to suddenly become hot. A dirty filter or evaporator can easily lead to poor ventilation and heat dissipation, causing the compressor to overheat and shut down. Therefore, regular cleaning is necessary to maintain cleanliness. 3. Moisture in the air conditioning system: When the temperature of the pressure-reducing capillary tube and evaporator drops below 0 degrees, any remaining moisture in the tubes begins to freeze, causing blockages. Since the refrigerant cannot flow smoothly through the pipes, the cooling efficiency gradually decreases, and the temperature starts to rise. At this point, the air coming out of the vents will be hot (natural air).
10
1
Share

Is it okay to keep the car door open after the engine is turned off?

If the car door is not properly closed, related electronic components such as indicator lights will remain on, consuming a small amount of power. In the short term, this will not affect the car. However, if left for an extended period, it may lead to a drained battery, making it impossible to start the car. Below is some information about car doors: 1. Introduction: The car door provides access for the driver and passengers, isolates external disturbances, and to some extent reduces side impacts to protect the occupants. The aesthetics of the car are also related to the design of the doors. 2. Standards for good car doors: The quality of a car door is mainly reflected in its anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators. Anti-collision performance is particularly important because in the event of a side collision, the buffer distance is very short, making it easy for passengers inside the car to be injured.
13
0
Share

How to Reset the Maintenance Light on a Land Rover Velar?

Land Rover Velar maintenance light reset method is as follows: 1. Hold down the maintenance reset shortcut button on the dashboard without releasing; depress the driver's brake pedal; 2. Press the car's start button; when the dashboard lights up, release the maintenance reset shortcut button; press the OK button on the multifunction steering wheel to confirm the reset. 3. Different models display different maintenance reminder lights. Models with maintenance reminder functions are set with a parameter by the manufacturer at the factory, and the reminder will appear when a certain mileage is reached. 4. Additional information: The Range Rover Velar is an imported vehicle and the fourth model in the Land Rover Range Rover series, positioned between the Evoque and the Range Rover Sport.
8
4
Share

What are the advantages of small yellow license plate vehicles?

The advantage of small yellow license plate vehicles is that they can be driven with only a C1 driver's license. The following are precautions for beginners driving small yellow license plate vehicles: 1. Understand the functions of the dashboard: including speedometer, tachometer, odometer, trip meter, fuel gauge, water temperature gauge, oil pressure warning light, etc. 2. Adjust mirrors: Know the basic principles of adjusting rearview mirrors and reversing mirrors. 3. Familiarize with functions: Be familiar with and correctly use systems such as turn signals, headlights, wipers, and horns. 4. Operate the steering wheel: Correctly operate the steering wheel, ensuring: turn as much as you return, turn less and return less, turn slowly and return slowly, turn more and return more, turn quickly and return quickly. Be familiar with the positions of each gear and the switching between gears. 5. Coordinate clutch and throttle: Be able to coordinate the cooperation between the clutch and the throttle. When starting, master the operation essentials of the clutch pedal to ensure smooth starting, no stalling, no gear jumping, especially when starting on a slope, in traffic jams, or following other vehicles. 6. Safe speed: Beginner drivers should control the speed well when driving.
1
4
Share

What is the difference between s90 t4 and t5?

The difference between s90 t4 and t5 lies in the power: Both the Volvo s90 T4 and Volvo s90 T5 are equipped with 2.0T engines. The T4 engine has a maximum power of 140 kW and a maximum torque of 300 N·m, while the T5 engine has a maximum power of 187 kW and a maximum torque of 350 N·m. Here is the relevant introduction of Volvo s90: 1. The 2020 Volvo s90 has a length, width, and height of 5083mm, 1879mm, and 1450mm respectively, with a wheelbase of 3061mm. 2. The 2020 Volvo s90 comes standard with the City Safety system, which this time adds the emergency braking function for oncoming vehicles.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.