···
Log in / Register

Why is the fuel consumption of the 2020 Hyundai Accent so high?

3 Answers
BriellaAnn
08/30/25 2:12am
Possible reasons for high fuel consumption include unnecessary increase in vehicle load, frequent braking and starting, and driving at high speeds in low gears. The main factors affecting fuel consumption are as follows: Unnecessary increase in vehicle load: Many new car owners like to pile various decorations and exterior accessories onto their cars, and some even go as far as moving their office and home into the car. Blindly installing body kits, spoilers, winches, and roof racks will also increase the vehicle's fuel consumption. Frequent braking and starting: Apart from the car's design and engine factors, the real waste of fuel comes from the driving habits of the owner. Frequent sudden braking and sudden acceleration are the biggest causes of increased fuel consumption. There was once an experiment where the same car was driven by different drivers, and the fuel consumption measured when driven by a novice was twice as high as that of an experienced driver. This shows how important good driving habits are for saving fuel.
Was this review help?
14
5
Share
VonKaleb
09/11/25 6:24am
Owners of the 2020 Hyundai Elantra often complain about high fuel consumption, and I've encountered similar issues. The main reason is that its small 1.6L engine struggles in city traffic, leading to unstable RPMs and increased fuel usage. Driving habits also play a role—sudden acceleration or frequent braking forces the engine to work harder. Additionally, neglecting regular maintenance, such as clogged air filters or underinflated tires, can reduce efficiency. Using the heater in winter also consumes extra fuel. I recommend adopting smoother driving habits and sticking to regular maintenance checks, as these small issues can add up to significant savings. If the problem persists, it's wise to have a trusted mechanic inspect the fuel injection system and ECU settings.
Was this review help?
5
0
Share
Expand All
LeSamantha
10/25/25 7:13am
I've been driving a 2020 Elantra for over half a year and always felt the fuel consumption was relatively high, mainly due to my driving habits: in city traffic jams, the engine frequently starts and stops, putting a heavy burden on the fuel system; frequently using the air conditioning in summer also makes the engine work harder. Adding luggage or carrying more passengers increases the weight, which slows down acceleration and leads to higher fuel consumption. Later, I adjusted my habits, such as using cruise control on highways and maintaining tire pressure around 2.5 bar, and the fuel consumption stabilized significantly. During regular maintenance, don’t overlook replacing the air filter—a dirty one can affect air intake, and timely replacement can save both hassle and money.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What are the dimensions of the Edge in terms of length, width, and height?

The dimensions of the Edge are 4878mm in length, 1925mm in width, and 1734mm in height. Below are the specific details about the Changan Ford Edge: 1. The Changan Ford Edge is positioned as a mid-size crossover SUV model. 2. The interior adopts an ST-Line style, featuring a 12.8-inch central control screen paired with a 10.1-inch LCD instrument panel. It is equipped with full-speed adaptive cruise control and active safety systems, among other configurations. 3. Under the hood, it is powered by a 2.0T turbocharged engine with a maximum power output of 180kw and a peak torque of 390Nm. The transmission is matched with an 8-speed automatic or an 8-speed manual-automatic transmission. There is also a 2.7T V6 turbocharged engine option, delivering a maximum power of 237kw and a peak torque of 500Nm, paired with an 8-speed manual-automatic transmission.
8
4
Share

Where is the original bumper label located?

The label is located at the bottom of the bumper. Below is relevant information: 1. Definition of automotive bumper: A car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. Many years ago, front and rear bumpers were made from steel plates pressed into channel steel, riveted or welded to the frame longitudinal beams with significant gaps from the car body, resulting in an unappealing appearance. With the development of the automotive industry and the widespread application of engineering plastics, car bumpers have evolved as important safety components. 2. Development of automotive bumpers: Modern passenger vehicle bumpers not only maintain their original protective functions but also pursue harmony and unity with the vehicle's styling, along with lightweight design. Today's front and rear bumpers are made of plastic, commonly referred to as plastic bumpers. Typically, a plastic bumper consists of three parts: the outer panel, energy-absorbing material, and crossbeam. The outer panel and energy-absorbing material are made of plastic, while the crossbeam is formed from cold-rolled sheet metal pressed into a U-shaped channel; the outer panel and energy-absorbing material are attached to the crossbeam.
8
3
Share

What does the dashboard display when the Volkswagen Lavida is powered on?

When the car is powered on, the computer needs to perform a self-check, and the fault lights will illuminate. After the self-check is completed, the fault lights will turn off. Types of fault lights: Exhaust temperature warning light: Since a three-way catalytic converter is installed on the exhaust pipe, the exhaust temperature increases. However, excessively high exhaust temperatures can easily damage the three-way catalytic converter, so such cars are equipped with an exhaust temperature warning device. Brake warning light: The brake warning light is red. If the red brake warning light illuminates, it indicates severe wear of the brake system's friction pads, low brake fluid level, or the parking brake being engaged (parking brake switch closed). In general, if the red brake warning light illuminates, the ABS warning light will also illuminate simultaneously, as ABS cannot function properly if there is a fault in the conventional brake system. Car indicator lights: Indicator lights include signal lights, turn signal lights, parking lights, etc., which serve to indicate the status of various vehicle functions.
3
0
Share

Can Old Tires Be Sold After Replacement?

Replaced old tires can be sold. Waste tires belong to scrap rubber, which generally does not decompose on its own, and indiscriminate disposal can have a significant environmental impact. When your vehicle's waste tires are replaced, please do not discard them carelessly. Waste tires can be sold to recycling shops or to tire repair professionals. Proper disposal of waste tires contributes to environmental protection. Methods for handling old tires: 1. Tire retreading: Tire retreading technology involves refurbishing worn or otherwise damaged tires to restore their usability. 2. Using catalysts to convert waste tires into oil: The technology for converting waste tires into oil involves heating and pressurizing waste tires to extract fuel. If simple and cheap equipment is used, this method can easily cause secondary pollution. 3. Rubber powder and reclaimed rubber from tires: This technology first involves crushing waste tires into 20~30 mesh rubber powder using specialized equipment, followed by desulfurization treatment to soften the rubber powder into malleable reclaimed rubber, which can then be reprocessed into various rubber products. If the desulfurization process is not up to standard, it can also cause pollution.
15
3
Share

Where is the VIN number of the Buick Excelle?

The VIN number of the Buick Excelle is located in the engine compartment, on the nameplate of the right shock absorber mounting drum. Additional information: 1. Exterior: The new car adopts Buick's new-generation family design language, with the iconic winged front grille naturally present. The chrome trim on the outer edge of the front grille extends into the headlights, creating an integrated aesthetic, while the new headlight design is more refined. 2. Dimensions: The new car measures 4539/1798/1475mm in length, width, and height, with a wheelbase of 2640mm. 3. Interior: A new brown interior similar to the new Regal has been added, with extensive use of leather to enhance the interior quality. 4. Configuration: Equipped with Buick's new-generation eMotion intelligent drive, eConnect intelligent connectivity, and eProtect intelligent safety technologies. Practical configurations such as roof racks and electric sunroofs are optional depending on the model. The 1.3T engine delivers impressive performance, essentially matching the level of the previous 1.5T engine. Additionally, there is a 1.0T version available with manual and dual-clutch transmissions.
7
2
Share

What is the principle of burning urea?

The principle of burning urea: Urea is injected into the automobile exhaust pipe through the urea tank injection system, where it undergoes a chemical reaction with the exhaust gas of diesel vehicles, converting the waste gas produced by the vehicle into water and nitrogen, thereby achieving the goal of energy saving and emission reduction. The use of urea is intended to reduce CO and NO in the exhaust gas, converting these two gases into harmless CO2 and NO2. After urea injection, it forms a mist and undergoes a redox reaction with the high-temperature exhaust gas, with the oxidized portion being completely oxidized substances. More details are as follows: 1. Modern diesel vehicles emit polluting nitrogen oxide gases during operation, which are harmful to the atmosphere and human health. Long-term exposure to these gases can lead to respiratory diseases. To reduce the emission of these gases and minimize their harm to human health, the government has mandated the use of urea in diesel vehicles. 2. For some vehicles, if urea is not used, the power of the vehicle may weaken, and the amount of exhaust gas produced during driving may increase. For example, a National V emission standard diesel vehicle, when fully loaded, consumes about 10kg of urea per 1,000 kilometers traveled.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.