···
Log in / Register

Why is the fuel consumption of Lavida over 10L/100km?

3 Answers
BarrettDella
07/30/25 12:48am
Here are the reasons for the high fuel consumption of Lavida: 1. Improper driving habits: Fuel consumption is closely related to the driver's habits, specifically manifested in not turning off the engine during prolonged idling or frequent ignition, aggressive acceleration or frequent braking, driving at high speeds in low gears or low speeds in high gears, etc. These driving habits significantly contribute to increased fuel consumption. 2. Abnormal tire pressure and tire wear: Low tire pressure increases friction between the tires and the ground, leading to greater resistance and higher fuel consumption. Normal tire pressure is around 2.5bar, which can be slightly reduced by 0.1bar in summer. Of course, tire pressure should not be too high either; it's best to inflate according to the vehicle's standard values. Additionally, if the tires are severely worn, frequent slipping can occur, which also increases fuel consumption. 3. Fuel quality and carbon deposits: Many car owners overlook fuel quality. Poor-quality gasoline can lead to increased carbon deposits, which roughen the intake pipe walls, affecting the intake efficiency and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, gasoline quality should not be ignored. Regular maintenance at a 4S shop is a forward-looking investment, not only ensuring the vehicle's normal performance but also inadvertently saving the owner from unnecessary future expenses.
Was this review help?
18
0
Share
EvanDella
08/15/25 6:05am
The Lavida's fuel consumption being relatively high, exceeding 10 liters, is quite common. I've been driving this car for several years and have encountered similar issues myself. Generally speaking, driving habits are one of the main reasons. For example, frequent sudden acceleration or hard braking can significantly increase fuel consumption, especially in congested urban areas where the engine often operates in inefficient ranges. Checking tire pressure is also crucial, as insufficient pressure increases rolling resistance. If the air filter is dirty, the engine won't get enough air, reducing efficiency and leading to higher fuel consumption. Additionally, check for unusual loads or excessive use of the air conditioning, as the AC puts a significant burden on the car in summer, affecting fuel efficiency noticeably. I recommend first inspecting the tires and air filter yourself and performing minor maintenance. If the issue persists, take it to a shop to check for faulty spark plugs or oxygen sensors. Developing good driving habits, such as smooth acceleration and deceleration, can save a lot of fuel. With proper daily maintenance, fuel consumption will naturally decrease.
Was this review help?
4
5
Share
Expand All
StRiver
10/20/25 3:24am
My Lavida sometimes consumes over 10 liters per 100km, which is really frustrating. I believe starting with routine maintenance can help. First, check the engine oil condition - old oil increases engine friction resistance, and regular replacement can improve efficiency. Remember to frequently check tire pressure, maintaining around 2.4 bar is generally optimal. Try to avoid rush hour traffic when driving, as stop-and-go conditions are most fuel-intensive. I've also found that vehicle weight matters significantly - don't overload the trunk with unnecessary items as extra weight naturally increases fuel consumption. Clean the air filter regularly to prevent clogging that affects air intake. If these simple measures don't work, there might be deeper issues like injector carbon buildup or ECU control abnormalities, requiring professional diagnosis with specialized equipment. Keeping the vehicle light and developing low-RPM driving habits can significantly improve fuel efficiency over time. Don't overlook small details - their cumulative effect is substantial.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

How to Adjust the Seats in a Passat?

Passat seat adjustment methods: divided into electric adjustment and manual adjustment. Electric adjustment involves a small module shaped like a seat on the left side of the seat; pushing it up, down, forward, or backward as needed can help you find a comfortable position. Manual adjustment includes a pull-up handle located under the seat on the right side for forward and backward movement—lift it and push the seat to adjust. For seat cushion height adjustment, there is a lift-up and push-down armrest on the left side of the seat to adjust the height. The Passat is equipped with a 1.4T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum torque of 250 Nm, and a maximum power of 110 kW. The front suspension of this car is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension.
14
0
Share

What are the components of a wheel structure?

Wheels are typically composed of a rim and spokes. The rim is the component that mounts and supports the tire on the wheel, while the spokes are the supporting components between the axle and the rim on the wheel. In addition to these components, wheels sometimes also include a hub. The rim is the part that mounts and supports the tire around the circumference of the wheel, forming the wheel together with the spokes. The rim and spokes can be integral, permanently connected, or detachable. The spokes are devices that protect the wheel rim and spokes of a vehicle's wheel, characterized by a pair of circular cover plates with diameters similar to that of the wheel rim. Based on the structure of the spokes, wheels are divided into disc-type and spoke-type. Currently, mainstream family cars mostly adopt disc-type spoke structures. The hub is a cylindrical metal component that supports the tire within its inner contour and is mounted centrally on the axle. It is also known as the wheel rim, steel rim, or wheel disc. Hubs come in a wide variety of types based on diameter, width, forming method, and material.
10
3
Share

What is the function of the oil pressure gauge?

The function of the oil pressure gauge is to detect and display the oil pressure in the engine's main oil passage to prevent major failures such as cylinder scuffing and bearing burning due to insufficient oil. The oil pressure gauge is used to indicate the oil pressure in the engine, allowing you to understand whether the engine lubrication system is working properly. It consists of an oil pressure sensor installed on the engine's main oil passage and an oil pressure indicator on the instrument panel. Commonly used oil pressure gauges include bimetallic, electromagnetic, and moving-magnet types, with the bimetallic type being the most widely used. Precautions for using the oil pressure gauge: The oil pressure gauge must be used with its matching voltage regulator and sensor; during installation, ensure good insulation of the terminals and avoid striking during disassembly; for spring-tube type oil pressure gauges, ensure the sealing of the pipe opening to prevent oil leakage. How to use the oil pressure gauge: Park the vehicle on a level surface and wait long enough (2-3 minutes) for the oil to drain back and check if the oil level is too low. Add the recommended grade of engine oil to the crankcase until the oil level reaches the "FULL" mark on the dipstick. Start the engine and confirm that the vehicle's pressure gauge or warning light does not indicate low or no oil pressure. Remove the oil pressure sensor or another engine block oil passage plug.
18
4
Share

What is the fuel tank capacity of the 2016 Elantra?

2016 Elantra has 4 models with a fuel tank capacity of 50 liters. The vehicle is equipped with a 1.6L naturally aspirated engine, and all models use a 6-speed automatic transmission (AT) or a 6-speed manual transmission (MT). Among vehicles in the same class, the 2022 Lavida has a fuel tank capacity of 51 liters, the 2021 Xingrui has a 50-liter tank, and the 2021 Corolla also has a 50-liter tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by car manufacturers is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space is reserved to allow fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is near E, it indicates low fuel, and when it is close to F, it means the fuel level is sufficient.
2
2
Share

What Causes the Fault Light to Illuminate in the Baojun 730?

The reasons for the engine fault light illuminating in the Baojun 730 include a damaged oxygen sensor, a faulty three-way catalytic converter, or the need to tighten or replace the fuel tank cap. Oxygen Sensor Replacement Needed: The oxygen sensor is crucial for both engine performance and environmental protection. It measures the amount of unburned oxygen in the exhaust to determine if the vehicle's fuel-air mixture is at its optimal state. There are many reasons for oxygen sensor failure, such as not changing the engine oil regularly or failing to clean impurities from the coolant in the engine promptly. If the oxygen sensor fails, fuel consumption may increase by more than 40% compared to normal levels. Three-Way Catalytic Converter Replacement Needed: The three-way catalytic converter usually doesn't encounter issues, but if problems with the spark plugs, ignition coils, or engine mechanical faults are not properly addressed, they can damage the three-way catalytic converter. Tightening or Replacing the Fuel Tank Cap Needed: According to statistics, issues with the fuel tank cap account for 7.1% of vehicle fault investigations in a year, which is not a small probability. If the fuel tank cap is lost or damaged, it can waste both time and money, and of course, the engine fault light will also illuminate. Problems with the fuel tank cap may lead to increased fuel consumption and environmental damage.
18
1
Share

Will an Air-Cooled Motorcycle Overheat on Long-Distance Rides?

An air-cooled motorcycle will not overheat on long-distance rides. Air-cooled motorcycles rely on natural wind during riding to force engine cooling, so as long as the motorcycle maintains a certain speed, it can achieve automatic heat dissipation. Theoretically, because the cooling method of air-cooled motorcycles is relatively traditional, their performance will sharply decrease after prolonged, uninterrupted riding. However, in reality, as long as the engine speed is controlled throughout the entire ride, its cooling method is fully capable of adapting to normal riding conditions. More information about air-cooled motorcycles is as follows: 1. Engine Speed: When the engine speed is too high, it will affect the cooling effect, especially during long-distance rides, where high speed directly determines the current cooling efficiency of the vehicle. Factors directly related to engine speed include driving habits, road conditions, and engine characteristics. 2. Steady-Speed Riding: During long-distance rides on an air-cooled motorcycle, the vehicle's condition mainly depends on the current riding state. Aggressive riding will require more frequent breaks and shorter distances, while steady-speed riding can appropriately extend the distance. Therefore, under the premise of the same total distance, steady-speed riding saves more time compared to aggressive riding and is also more beneficial for both the vehicle and the rider.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.