Why is the fuel consumption of Baojun 310W so high?

Are Pickup Trucks Harder to Drive Than Sedans?

Pickup trucks are relatively easier to get started with. Although pickup trucks might feel a bit cumbersome when shifting gears or stepping on the clutch, they offer a wide field of vision, making it easier to find reference points. Comparatively, they are easier to handle than sedans. According to national regulations, vehicles driven with a C1 driver's license cannot exceed 6 meters in length, and pickup trucks happen to be the models closest to this limit. More details are as follows: Pickup trucks are sturdy and durable: Even if they break down, repairs are very convenient. After all, driving students know nothing at the beginning, which can be very hard on the vehicle. Therefore, choosing a sturdy, durable, and easy-to-repair vehicle might be the best option for driving schools. This is why many driving schools still use pickup trucks. Pickup trucks can carry a lot of stuff: They come with a large cargo bed at the back, allowing items to be placed directly inside. This means students sitting in the cab won’t feel cramped.

16

0

Share

Is the Clutch the Same as the Accelerator?

The clutch and the accelerator are two different concepts. Clutch: The clutch is a device that transmits the engine power of a car or other power machinery to the axle in an on-off manner. During driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine with the transmission, thereby cutting off or transmitting the engine's power to the transmission. The clutch is a common component in mechanical transmission, allowing the drivetrain to be separated or engaged at any time. Accelerator: The accelerator, also known as the "throttle," refers to the control device that regulates the engine's power (thrust). In a car engine, the accelerator is usually controlled by a pedal, also called the throttle pedal, which is the device that controls the fuel supply to the engine.

6

3

Share

Why Can't China VI Vehicles Be Converted to CNG?

China VI vehicles are not incapable of being converted to CNG, but the cost-effectiveness after conversion is too low. The following are the reasons why China VI vehicle owners are reluctant to convert from gasoline to CNG: 1. High conversion cost: Converting to CNG requires a substantial amount of money for the conversion. Because this cost is relatively high, many people say that the money spent on converting a car from gasoline to CNG could be used to refuel many times, making the cost-effectiveness not worth it. 2. Few CNG stations: After converting to CNG, vehicles need to refuel at CNG stations, but currently, the number of CNG stations nationwide is limited, making refueling difficult. 3. Post-conversion vehicle issues: Many owners report that after converting to CNG, their vehicles often develop minor problems, such as difficulty starting when cold. 4. CNG tank takes up space: Vehicles converted to CNG require a CNG tank to be installed in the trunk, which makes the trunk space feel even smaller.

6

4

Share

What are the reasons for the failure of the co-pilot window lift?

The reasons for the failure of the co-pilot window lift: line failure; deformation or damage of the glass mud slot; loose screws of the lifter; damage to the window lifter; deviation of the installation position of the guide rail. Recovery method: You can try to disconnect the power supply and reconnect to see if it recovers. In addition, you can also repair the circuit; clean or replace the glass; replace the lifter. Notes: To prevent rainwater from flowing in, there is a rubber band on the inner window frame. After the glass is soiled, the friction with the rubber band increases, and the switch will also be affected, so the glass needs to be kept clean frequently. Small cards are often inserted into the window gap. If not handled properly, the card may fall into the door along the window. The internal structure of the door is complex, and the card falling into the door will cause a series of chain reactions. For example, the lifter is damaged, the door fails, the drain is blocked, etc.

17

2

Share

What are the reasons for the high fuel consumption of the Mazda Atenza?

Reasons for high fuel consumption in vehicles include: fuel consumption fluctuations due to temperature effects, prolonged lack of maintenance leading to dirty engine oil and air filters which increase fuel consumption, spark plugs needing replacement, insufficient tire pressure, incorrect data from certain sensors such as the coolant temperature sensor and oxygen sensor, and excessive carbon buildup in the vehicle. Additional information is as follows: 1. Introduction: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling a certain speed on the road for 100 kilometers. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer under objective conditions using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data for the model when traveling at specified speeds. 2. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated based on repeated tests where the vehicle travels at specified speeds and times on designated roads, also known as multi-condition road cycle fuel consumption.

12

0

Share

Can China IV Vehicles Be Phased Out by July 2021?

China IV vehicles cannot be phased out by July 2021 due to their substantial market presence, which requires a certain period for complete elimination. Below are relevant details regarding China IV vehicles: 1. Interpretation of National Policies: From a policy perspective, the phase-out of yellow-label vehicles was not implemented abruptly. Initial measures included restricting urban access before gradual transition. Given that China III and China IV vehicles currently account for approximately 80% of the market share, while China I and China II models represent only about 10%, it is estimated that 4-5 more years will be needed for full phase-out. 2. China IV Emission Standards: The China IV emission standard represents the fourth-stage national standard for motor vehicle pollutant emissions. Primary automotive pollutants include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). These emissions are controlled and reduced to mandated levels through technologies such as advanced catalytic converter active layers, secondary air injection systems, and exhaust gas recirculation systems equipped with cooling devices.

1

4

Share

Why is the fuel consumption of Baojun 310W so high?

Are Pickup Trucks Harder to Drive Than Sedans?

Is the Clutch the Same as the Accelerator?

Why Can't China VI Vehicles Be Converted to CNG?

What are the reasons for the failure of the co-pilot window lift?

What are the reasons for the high fuel consumption of the Mazda Atenza?

Can China IV Vehicles Be Phased Out by July 2021?

What is the reason for the Polo feeling like it can't brake effectively?

Why does the Honda URV not respond when a USB drive is inserted?

How many points are deducted for not turning off the engine when getting out of the car in Subject 3?

Honda URV Electric Tailgate Won't Open?