Why is the first maintenance required after three months for a new car?

1 Answers
ElleRose
07/30/25 7:42am
First maintenance involves changing the engine oil, which not only lubricates but also cleans. Components like the engine block and pistons in a new car are not yet properly broken in. The requirement to change the oil after three months or 3,000 kilometers is intended to clean out metal shavings and other impurities generated during the engine's break-in period, ensuring future performance. During the first maintenance, engine oil and the oil filter are mandatory replacements. Whether other items need to be changed depends on the vehicle's manual, as requirements vary by model. Of course, replacing the cabin air filter and engine air filter is even better, as these can be changed without strictly following the manual.
Was this review help?
14
4
Share
More Forum Discussions

How to Clean the Diesel Tank After Mistakenly Adding Urea?

It is necessary to immediately clean the urea tank and exhaust pipe, disassemble the bottom of the urea tank, drain the solution inside, replace the urea filter, and perform a thorough cleaning. Below is more information about automotive urea: 1. Advantages: Automotive urea can optimize engine performance and fuel consumption, relatively reducing diesel consumption by up to 5-7%. 2. Usage precautions: The choice of urea solution with different qualities will also affect vehicle maintenance. When using urea solution with lower purity, impurities such as particles and heavy metal ions may be generated, causing serious damage to components of the vehicle's SCR system, such as the nozzle and filter, leading to unnecessary economic losses.
18
0
Share

Should I reverse into the parking space from the left or right first in Subject 2?

In Subject 2, you should reverse into the parking space from the right first. Here is some relevant information about Subject 2: 1. Introduction: The driver's test is a qualification examination organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can you obtain a driver's license and legally drive a motor vehicle. 2. Content: The content of the motor vehicle driver's test is divided into the road traffic safety laws, regulations, and related knowledge test (also known as the 'theory test', referred to as 'Subject 1'), the field driving skills test (commonly known as the 'pole test', referred to as 'Subject 2'), and the road driving skills and safe and civilized driving common sense test (commonly known as the 'road test', referred to as 'Subject 3'). The test content and passing standards are unified nationwide, with corresponding test items specified according to different types of vehicles eligible for driving.
1
2
Share

What is the difference between the Sagitar GLI and the Sagitar?

The differences between the Sagitar GLI and the Sagitar are as follows: 1. Chassis Tuning: The GLI's chassis tuning is excellent. During high-speed (120km/h) emergency lane changes, the body remains very stable, providing strong confidence during quick sharp turns or high-speed lane changes, which the regular Sagitar cannot achieve (the regular Sagitar shows noticeable body float and is prone to fishtailing during 120km/h emergency lane changes). 2. Powertrain: The GLI is equipped with a second-generation EA888 engine, delivering significantly more power than the regular Sagitar. Additionally, the regular Sagitar uses a dry dual-clutch transmission, while the GLI features a DQ250 6-speed wet dual-clutch transmission (this transmission is purely imported and not produced domestically).
1
3
Share

What are the knowledge about car gears?

Car gears function as follows: 1. First gear: Starting gear, used for vehicle startup, not suitable for prolonged high-speed operation. 2. Second gear: Passing gear, mainly used for navigating road surfaces and handling complex situations, such as sharp-angle (right-angle) turns without special obstacles, densely populated and bustling areas, steep slopes, and bumpy roads. 3. Third gear: Transition gear, primarily used for low-speed driving in urban areas, facilitating easy acceleration to fourth gear or deceleration to second gear. 4. Fourth gear: Driving gear, mainly used for prolonged high-speed driving and economical travel, with most vehicles' economical speeds occurring in the low-speed range of fourth gear. 5. Fifth gear: High-speed gear, mainly used for long-distance highway driving.
4
4
Share

Which part does the vehicle frame refer to?

The position of the vehicle frame is supported on the wheels through the suspension system, front axle, and rear axle. Here is more information about the vehicle frame: 1. Introduction: The vehicle frame is a type of automotive chassis structure, but most modern cars no longer use a frame-type chassis design. Only trucks and large buses typically employ this design. 2. Function: It serves as the main load-bearing component, carrying almost the entire weight of the cargo. The quality of the frame affects the vehicle's overall lifespan and driving safety. Vehicles without a frame are usually referred to as having a unibody construction, while those with a frame are called body-on-frame vehicles.
18
1
Share

Where is the air intake of the Tayron located?

Open the hood of the Tayron, and the location of the air filter is the car's air intake. Here is some additional information: 1. Body dimensions: The length, width, and height of the Tayron are 4595 mm, 1860 mm, and 1660 mm respectively, with a wheelbase of 2371 mm. 2. Positioning: The Tayron is a mid-size SUV built on the MQB platform and based on the European version of the Tiguan. In terms of styling design, driving experience, comfort, cutting-edge technology, space structure, and safety protection, the Tayron sets a new standard for the new generation of German premium mid-size SUVs.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.