Why is the fan of BYD F3 not working?
3 Answers
The reasons why the fan of BYD F3 is not working are: 1. Poor contact of the air conditioning switch: If the air conditioning switch has poor contact, it cannot control the normal startup of the car air conditioning, and the two cannot connect, resulting in the fan of the car air conditioning not working; 2. Fan bearing detachment: When the fan bearing is detached, turning on the air conditioning only causes the bearing to idle without the fan rotating normally. In this case, the fan bearing needs to be reinstalled and secured; 3. Damage to the fan motor coil: The fan cannot function properly, leading to its failure to rotate. In this situation, the fan motor coil needs to be inspected and repaired, or replaced if necessary.
I've been driving a BYD F3 for many years and encountered the issue of the fan not working once. That time was during a long trip, the air conditioning fan didn't move at all, and the car interior was as hot as a steamer. I checked the fuse, found the fan's fuse in the engine compartment's fuse box, it was already blown, and replacing it with a new one fixed the problem. Relay issues are also common; if that little black block doesn't make a clicking sound when the switch is pressed, it means it's broken. The fan motor might be aging, or the blades might be stuck with debris preventing rotation, or the wiring connectors might be rusted causing poor contact and no current flow. Don't risk repairing it yourself; find a professional repair shop to test the voltage and circuit short points with tools. A non-working fan not only causes the air conditioning to fail but also triggers an alarm when the engine overheats, affecting safe driving. Solve it promptly to ensure safety.
Common reasons for BYD F3 fan not rotating: fuse blown due to overload circuit protection, relay contact wear, signal interruption, oxidized or loose wiring connectors. Motor bearing seized or winding short circuit, low voltage fault. Control panel malfunction, air conditioning signal loss, system disorder. Check temperature control sensor. Repair shop should test computer fault codes for accurate repair.