Why is the engine warning light on in the Hongqi H5?

2 Answers
VanZachary
07/25/25 9:18pm
There are mainly 7 reasons for the engine warning light in the Hongqi H5: Sensor failure: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to come on. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear and trigger the warning light. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. Once detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all cause poor combustion of the air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine warning light to come on. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noises, or blue/black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake system, it may cause engine pipeline blockage, and in severe cases, trigger the engine warning light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust system failures can also cause the engine warning light to come on. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing failures, with the catalytic converter being the most frequent. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system failures can easily cause catalytic converter problems. Anti-theft system failure: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally and trigger the engine warning light. If the engine warning light comes on, follow these steps: First, check if the engine is running normally. Look for issues like shaking or black smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position without pressing the clutch. The car will enter self-check mode after powering on. Wait 5-10 seconds and observe if the warning light turns off. If the warning light remains on, visit a service station as soon as possible. The service station can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
Was this review help?
16
1
Share
VonRachel
08/11/25 10:14pm
I just drove a Hongqi H5, and the engine warning light came on. There could be many reasons, but don't panic right away. Common issues include faulty sensors, such as an oxygen sensor giving inaccurate exhaust readings, which can trigger an alert; problems in the emission system, like a clogged catalytic converter, can also light up the warning; in the ignition system, worn-out spark plugs causing incomplete combustion; or in the fuel system, dirty injectors or unstable pressure can similarly set off the alarm. Even something as simple as a loose fuel cap causing vapor leaks is a common false alarm. My advice is to slow down and pull over immediately when the light comes on, checking for any unusual noises or smoke. If everything seems normal, continue driving a short distance to a professional repair shop. Don't delay, as minor issues can turn into major repairs—like a burnt-out catalytic converter costing thousands to fix. Regular maintenance, such as changing the air filter and avoiding low-quality gasoline, can reduce such risks. Hongqi models have advanced electronic systems but require careful maintenance.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

How to fix the 'no signal' issue in cars?

When this situation occurs, you can try restarting the main unit and check the related wiring to ensure it's not caused by looseness or poor contact. Finally, you can also resolve it by upgrading the system software, as using an outdated version may cause problems.
5
5
Share

How to deal with PEPS failure in cars?

PEPS (Passive Entry Passive Start) keyless entry and start system warning light comes on due to faults in the vehicle body receiving module or remote transmitter module. To resolve PEPS failure, you need to visit a 4S shop to refresh the car's computer and clear the error codes.
11
4
Share

How to Solve Fogging on Car Windows?

If the fog inside the car is not too heavy, opening the windows on both sides will gradually make the fog disappear. Selecting the appropriate air conditioning setting can also help by using the air blown out to defog. Applying anti-fog spray on the inner and outer surfaces of the windows can prevent water vapor from condensing into a fog layer.
5
2
Share

What to do when the car P light keeps flashing and won't start?

First, it may be an electrical or electronic malfunction. Electronic malfunction mainly refers to the central computer control board losing its function. Then it could be a fuel system failure, or the battery has failed. Finally, it may also be a mechanical failure, as the car's self-diagnosis system constantly monitors the vehicle's operation.
1
1
Share

How to enable the horn sound when locking BMW X3?

BMW's locking system does not produce a horn sound by default, only the locking mechanism sound, and there is no setting available to change this. It requires ECU flashing to enable this feature. However, this method is relatively complicated and needs professional assistance to perform the operation.
2
5
Share

How to Unlock the Anti-Theft System on Buick LaCrosse?

Press the vehicle's brake pedal to keep the car stationary. Activate the electronic parking brake button to prevent the vehicle from moving during the anti-theft deactivation process. Then, click the settings button on the vehicle's central control display screen. On the pop-up interface, select the ReaR button, followed by clicking OFF. When the following message appears on the central control display, the anti-theft function will be deactivated.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.