Why is the Enclave silent?

2 Answers
MacElliot
07/28/25 7:27pm
The reason why the Enclave is silent: It may be due to a malfunction in the speakers or speaker wiring. Here are the relevant details: Check the volume and hardware: If none of the four speakers are working, first check if the volume is turned on. If there is still no sound after adjusting the volume, it is necessary to inspect the hardware inside the navigation unit. It could also be that the sound module is damaged. It is recommended to visit a 4S shop or an auto repair shop for inspection and repair. Solutions for silence: When the car stereo plays music but there is no sound, only a buzzing noise, the most likely cause is an abnormality in the wiring connections. It is necessary to enhance the shielding of the audio wiring, which may include replacing the speaker wires. Additionally, the wiring path should avoid interference sources; otherwise, noticeable buzzing noise may persist.
Was this review help?
17
3
Share
ElianaMarie
08/12/25 12:31am
A few days ago, the sound system in my Envision suddenly stopped working, and I initially thought it was broken, which made me quite anxious. Upon closer inspection, I realized I had accidentally pressed the mute button on the steering wheel. Such accidental operations are quite common, especially when driving and fumbling around. Additionally, turning the volume knob to the lowest setting can also cause muting, so it’s important to check if the volume is set to zero. If the system freezes, restarting the car usually fixes the issue. I also noticed Bluetooth connection problems—sometimes poor phone connectivity can affect the audio output. I recommend car owners check these basic settings first before rushing to a repair shop. It’s also good to familiarize yourself with the control panel to prevent issues in advance.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Is the turn signal down for left or right turn?

Turning the signal lever downward activates the left turn signal. Drivers can simply imagine the turn signal lever as a steering wheel to determine the direction to turn. The standard convention is right-up and left-down for turn signals, where downward (counterclockwise) is generally understood as left, and upward (clockwise) as right. According to Articles 57(1) and 57(2) of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: When making a left turn, changing to the left lane, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal must be activated in advance. When making a right turn, changing to the right lane, returning to the original lane after overtaking, or parking by the roadside, the right turn signal must be activated in advance. The turn signal is a crucial indicator light used when a motor vehicle is turning, alerting surrounding vehicles and pedestrians. The turn signal bulb uses a xenon tube and a microcontroller-regulated circuit to achieve alternating high-frequency flashing. The turn signal employs a flasher unit to create the blinking effect. As a signal light, the primary function of the turn signal during daily driving is to notify nearby vehicles of an intended turn, prompting them to yield and avoid collisions. Whenever a vehicle needs to steer away from its current lane, the turn signal must be activated beforehand—this is a fundamental principle of safe driving.
3
5
Share

Is a Fuel Consumption of 6.8 Considered High?

A fuel consumption of 6.8L per 100 kilometers is not considered high. For a 2.0L vehicle, this consumption rate is very low; for a 1.6L vehicle, it is also considered low. As for vehicles with around 1.4L engines, a fuel consumption of 5-6L is generally regarded as fuel-efficient, so 6.8L is not high. Below are some reasons for high fuel consumption: 1. Improper driving habits: Fuel consumption is closely related to the driver's habits, such as idling for long periods without turning off the engine or frequent ignition, aggressive acceleration or frequent braking, driving at high speeds in low gears or low speeds in high gears, etc. These habits significantly contribute to increased fuel consumption. 2. Abnormal tire pressure and tire wear: Low tire pressure increases friction between the tires and the road, leading to greater resistance and higher fuel consumption. The normal tire pressure is around 2.5bar, which can be reduced by 0.1bar in summer. However, tire pressure should not be too high either; it's best to inflate according to the vehicle's standard values. Additionally, severely worn tires can cause frequent slipping, which also increases fuel consumption. 3. Fuel quality and carbon deposits: Many drivers overlook fuel quality. Poor-quality gasoline can lead to increased carbon deposits, which roughen the intake pipe walls, affecting air intake and the quality of the air-fuel mixture, causing a sharp rise in fuel consumption. Therefore, gasoline quality should not be ignored. Regular maintenance at a 4S shop is a forward-looking investment, ensuring normal vehicle performance and saving unnecessary expenses in the long run.
16
2
Share

Why does CarPlay only charge but not respond?

CarPlay only charging but not responding could be due to the following reasons: Reason 1: USB debugging is not enabled on the phone. Solution: Restore the phone to factory settings and then reconnect to see if it works. If it still doesn't connect, you may need to visit a 4S store for inspection. Reason 2: The phone's data cable might be damaged or broken. Foreign objects or surface oxidation on the data cable plug or USB plug can also affect CarPlay connection. Solution: Replace the phone's data cable and clean any foreign objects. Reason 3: The contact metal strips in the vehicle's external USB port may not maintain good contact with the USB. Long-term use of the host's USB port can cause loosening, and over time, oxidation may occur, leading to poor internal plug contact. Solution: In this case, try plugging and unplugging the cable's connectors several times. If the issue persists, the USB port may need to be replaced. Reason 4: There might be an issue with the vehicle's host system. Solution: Restore the vehicle's host system to factory settings. Note that before restoring, ensure to back up important system information to avoid file loss during the process. Reason 5: There could be a problem with CarPlay on the phone. Solution: Turn off the phone and then turn it back on to try again. CarPlay is an in-car system released by Apple Inc., seamlessly integrating users' iOS devices and iOS experience with the dashboard system. CarPlay only supports iPhones with a Lightning interface. Although iPads now support this interface, Apple has not included iPads as CarPlay-supported hardware devices.
15
2
Share

What is the exeeo car?

exeeo is a model under Chery's Exeed brand, which specializes in manufacturing SUV models. Exeed's lineup includes models such as the LX, TX, TXL, and Landmark. The LX is a compact SUV under the Exeed brand, with dimensions of 4533mm in length, 1848mm in width, and 1699mm in height, and a wheelbase of 2670mm. Below is an introduction to the Exeed LX: 1. Exterior: The Exeed LX features a large number of horizontal lines on its grille and lower air intake. The star-track LED light strip and the star-matrix LED headlights form a continuous structure, which visually widens the front face to some extent. The rear also adopts a continuous LED tail light design, complemented by horizontal width-stretching lines, making the rear design language extremely simple while echoing the horizontal design of the front face. 2. Interior: The Exeed LX boasts a very avant-garde layout. The continuous 12.3-inch dual-screen setup significantly enhances the technological atmosphere and sense of luxury. The extensive use of soft leather wrapping in the materials adds to its premium feel. However, the most attractive feature of the Exeed LX is the Lion Cloud i-Connect@Lion 3.0 intelligent connectivity system integrated into the center console. This Lion Cloud i-Connect@Lion 3.0 system is highly powerful, supporting not only conventional functions like navigation, voice control, multimedia, and Bluetooth but also features such as smartphone connectivity, AR real-world navigation, facial recognition, L2.5-level intelligent driving assistance system, internet access, and remote app operations, showcasing a range of personalized and high-tech capabilities.
5
4
Share

What does it mean when a car displays 'pressure loss detected'?

The car displays 'pressure loss detected' because the tire pressure is insufficient. Emergency measures for pressure loss: If no inflation equipment is available, you can drive the vehicle to the nearest repair shop or 4S store for inflation. Impact of driving with pressure loss:
11
4
Share

What is the purpose of wheel alignment for a car?

The purpose of wheel alignment for a car is to maintain stable straight-line driving, facilitate easy steering, and reduce wear on tires and steering components during operation. Factors affecting wheel alignment: Cars driving on roads daily may encounter potholes or speed bumps that could alter wheel alignment data. If the wheel alignment data changes, the car may experience deviation or uneven tire wear, affecting its handling and driving stability. Precautions for wheel alignment:
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.