Why is the Dodge Charger not sold in China?

How to Properly Change Automatic Transmission Fluid?

Automatic transmission fluid should be changed as follows: 1. Remove the transmission guard plate; 2. Unscrew the drain plug at the bottom of the transmission, drain the old fluid, and then tighten the plug; 3. Open the transmission oil filler cap and add new transmission fluid until it reaches the midpoint between the upper and lower level marks. The recommended replacement interval for automatic transmission fluid is every 3 years or 60,000 kilometers. The core function of an automatic transmission is to enable automatic gear shifting. While driving, the driver operates the accelerator pedal as needed, and the transmission automatically selects the appropriate gear based on engine load and vehicle operating conditions.

4

0

Share

What Should Be Noted When Changing Engine Oil for a Car?

When changing engine oil for a car, the following points should be noted: 1. Choose the appropriate engine oil for the vehicle; 2. Perform the oil change as much as possible when the engine is warm to ensure complete drainage of the old oil; 3. The oil filter must be replaced when changing the oil; 4. The amount of oil added should be appropriate, as indicated by the oil dipstick; 5. After adding the oil, start the engine and check all components for any leakage. Engine oil, also known as engine lubricant, serves the following functions: 1. Lubrication and friction reduction; 2. Auxiliary cooling; 3. Sealing and leak prevention; 4. Rust and corrosion prevention; 5. Shock absorption and cushioning. Engine oil consists of two main components: base oil and additives, with the base oil being the primary constituent of the lubricant.

6

2

Share

How to reset the maintenance light on a 2017 Focus?

The method to reset the maintenance light on a 2017 Focus: 1. Press the start button without stepping on the brake pedal to power on the vehicle; 2. Use the control buttons on the steering wheel to bring up the oil life reset page; 3. Use the selection buttons on the steering wheel to choose the corresponding item, the instrument panel will display the reset prompt, then press the OK confirmation button; 4. The reset operation is completed. The dimensions of the Focus are 4534mm in length, 1823mm in width, and 1483mm in height, with a wheelbase of 2648mm. The new-generation 2020 Focus is equipped with two engines: a 1.5L EcoBoost and a 1.5L Ti-VCT, with all models meeting the China VI emission standard.

16

0

Share

What is the working process of the automotive ABS system?

The working process of the automotive ABS system is: 1. During normal braking, ABS does not intervene in brake pressure control. The braking force on the wheels is determined by the driver's pedal pressure; 2. Meanwhile, the ECU uses wheel speed sensors to monitor the rotational speed of each wheel, calculates the vehicle speed, and assesses tire and road conditions; 3. When it detects excessive deceleration or slip rate in a wheel, indicating an impending lock-up, ABS activates the anti-lock braking pressure regulation process. The ABS anti-lock braking system adjusts the braking force for each wheel based on the hydraulic braking system. Components include: conventional hydraulic braking system, wheel speed sensors, electronic control unit (ECU), and ABS actuator.

9

5

Share

How to Deal with a Chipped Car Paint?

Car paint chipped a piece of the treatment method is: 1, use scratch wax in the car paint was knocked off the part of the slight grinding, basically can cover the part of the exposed primer; 2, use a similar color touch-up pen, in the scratch repair can be. The car can be coated on the paint surface, the purpose is to protect the car paint surface gloss will not decay, while the paint surface in the physical to get a layer of protective film, so as to achieve the purpose of protecting the paint surface. The main component of car paint is resin, the molecular gap is relatively large, after coating the film liquid in the silicon, silicon dioxide, nano-inorganic silicon and other small molecular elements can fully penetrate into the car paint molecular gap and micro-holes, on its surface to form a transparent crystalline film layer similar to the mobile phone screen protective film, greatly improving the hardness of the car paint surface and anti-scratch ability.

15

0

Share

What to Do When the Windshield Wipers Don't Clean Properly?

Solutions for windshield wipers not cleaning properly: 1. Use specialized windshield wiper fluid; using low-quality cleaning fluid can result in the wipers frequently failing to clean effectively. 2. If the car hasn't been driven for a long time and the windshield is covered in dust or leaves, clean it first before using the wipers. 3. After washing the car or after rain, lift the wipers and wait for them to dry before lowering them back. If there's too much water on the windshield, the wipers may stick to the glass, which can damage or deform them upon reuse. If the wipers are severely aged or damaged, replace them with new ones.

20

2

Share

Why is the Dodge Charger not sold in China?

How to Properly Change Automatic Transmission Fluid?

What Should Be Noted When Changing Engine Oil for a Car?

How to reset the maintenance light on a 2017 Focus?

What is the working process of the automotive ABS system?

How to Deal with a Chipped Car Paint?

What to Do When the Windshield Wipers Don't Clean Properly?

How to adjust the time on a CRV?

Does the vehicle transfer case require oil change?

What are the hazards of a faulty thermostat to a car?

How Many Cylinders Does the Changan Eado Engine Have?