···
Log in / Register

Why is the dashboard of an electric tricycle not lighting up?

3 Answers
DeHope
09/08/25 5:57am
There are three reasons why the dashboard of an electric tricycle does not light up. Motor damage: When opening the motor, be careful not to let the motor windings rub to avoid damaging them, and do not use iron objects to hit the magnets to prevent them from cracking. When replacing the Hall sensor in a brushless motor, pay attention to the connection of the Hall wires. If it's your first time, it's best to remove one wire and solder the new one to avoid incorrect soldering. After soldering, first use 502 glue to secure it, then use AB glue to reinforce it to prevent loosening. When replacing magnets, ensure that the glue on the stator and magnets is cleaned off. When gluing magnets, apply glue to the opposite side of where the magnets attract each other, then bond them. Dashboard circuit damage: If the power indicator light on the electric tricycle dashboard does not light up but the motor runs normally, it could be due to no voltage between the positive and negative leads of the dashboard, poor contact in the connectors, or broken leads. Simply reconnecting or replacing the wires should resolve the issue. LED damage: When the LED on the electric tricycle is damaged, it needs to be replaced or repaired. If there is a break in the dashboard circuit board, promptly replace or repair the dashboard circuit board.
Was this review help?
3
3
Share
AthenaDella
09/20/25 4:33am
When repairing electric tricycles, I often encounter issues with the dashboard not lighting up, mostly due to a blown fuse. The circuit overload protection causes it to burn black. You can start by checking the fuse box, usually located near the battery, and use a multimeter to test the voltage. If the voltage is normal but the dashboard still doesn't light up, there might be loose wiring or a faulty dashboard itself, which requires opening the panel to inspect the connections. Battery aging is another common cause; when there's no power, the entire system shuts down, and the dashboard goes off—try charging it. Regularly inspect the wiring and fuses to prevent rainwater from corroding the circuits. Addressing these issues in advance can save you from panicking while driving.
Was this review help?
11
0
Share
Expand All
VonColton
11/03/25 4:57am
I once had an issue with my electric tricycle where the dashboard wouldn't light up, which really freaked me out thinking it would cost a fortune to fix. Turned out it was just a blown fuse - replaced it with a new one and the lights came back on. Poor battery condition often causes this too; old batteries can't hold charge well, leading to unstable power supply to the dashboard and resulting in blackouts, which usually recover after charging. A simple troubleshooting method is to first test the system power by turning on the headlights, then check the dashboard fuse in the fuse box to see if it's intact. If you have the tools, you can replace the fuse yourself; otherwise, just visit a nearby repair shop - it's a quick fix. For daily use, pay attention to your battery's lifespan and avoid waiting until it's completely drained before recharging.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What does it mean to take a wide turn while driving?

This wide turn and small turn refer to the turning radius. The right turn has a smaller radius, while the left turn has a larger radius. Alternatively, it can be described in terms of the turning path—the left turn covers a longer path, and the right turn covers a shorter one. The purpose of taking a wide turn while driving: Vehicles are required to take a wide left turn and a small right turn to ensure traffic safety and avoid collisions with non-motorized vehicles. Small right turn: When making a right turn, vehicles should take a small turn because a larger turning radius would interfere with straight-moving vehicles. Additionally, when turning right, without affecting straight-moving vehicles, the turn should lead into the rightmost lane. If the turn ends up in the middle or leftmost lane, it would disrupt traffic in other lanes.
20
4
Share

How old can the production date of new car tires be?

New car tires should not be older than 3 years from their production date. Below are specific details about tires: 1. Definition of stock tires: Tires that have been in storage for more than 1 year after production are considered stock tires. However, this also depends on the tire's lifespan. Typically, all-season or economy tires have a lifespan of 3-5 years, with a mileage of around 50,000 kilometers. 2. Checking the tire production date: To find out the production date of a tire, you need to understand how to read the production date marked on the tire. The production date can usually be found on the sidewall of the tire, represented by a four-digit number. The date is part of a series of alphanumeric characters starting with DOT, where the last four digits indicate the production date. The first two digits represent the production week, and the last two digits represent the production year.
10
4
Share

Can I Install the License Plate Myself?

Vehicle owners can install the license plate themselves. The vehicle management office usually provides a set of fasteners with the license plate, but the set only includes 4 fasteners. Unless restricted by vehicle conditions, all 4 mounting holes on each license plate should be equipped with fasteners, so you may need to purchase an additional set. Below are the specific details about license plates: 1. Definition: A license plate, commonly referred to as a vehicle plate, is a panel mounted on the front and rear of a vehicle. It is typically made of aluminum, sheet metal, plastic, or paper, and displays the vehicle's registration number, registration region, and other relevant information. 2. Function: The license plate serves as a unique identifier and registration record for each vehicle. Its primary purpose is to indicate the vehicle's registered region and enable the tracing of the vehicle's owner and registration details through the license plate number.
3
2
Share

Is it allowed to overtake from the right side on national highways?

No. According to Chinese traffic laws, on roads with traffic moving in the same direction, the left lane is for motor vehicles while the right lane is for non-motor vehicles. Overtaking should be done by turning left to pass the vehicle in front. Overtaking from the right side is illegal. True right-side overtaking refers to when a following vehicle in the same lane changes to the right lane, passes the vehicle in front, and then returns to the original lane. Choose the right moment to overtake: Drivers should carefully choose the right moment to overtake. It's safer to overtake when there are fewer vehicles around and road conditions are good; Remember to use turn signals: Turn on the left turn signal when overtaking to alert vehicles behind, and quickly turn on the right turn signal after overtaking to return to the normal lane;
14
1
Share

Do all financed cars come with GPS?

Banks do not require consumers to purchase GPS tracking systems. In this regard, car dealerships forcing consumers to buy GPS tracking systems constitutes an illegal practice of forced bundling. Standard installment car purchases: In fact, conventional bank auto loans or credit loans rarely require GPS installation. Typically, either the vehicle registration certificate is used as collateral, other properties are mortgaged, or it's simply an unsecured credit loan. For standard installment car purchases, you just need to use the vehicle, with compulsory traffic insurance being the maximum requirement. Illegal practices: Using GPS tracking to locate and impound vehicles without proper authorization constitutes illegal behavior. However, due to the substantial profits involved and relatively low legal risks, many choose to take these unlawful actions.
7
2
Share

Will There Be Residue When Applying TPU Film to the Dashboard?

Whether there will be adhesive residue when applying TPU film to the dashboard is influenced by multiple factors. The main factors include the quality of the film, the technique used during application, the cleanliness and material of the screen, and the duration of the film's application. These factors can vary significantly in real-world use, making adhesive residue unavoidable. Below is relevant information about applying film to car dashboards: 1. Impact on Use: Over time, the film may leave marks on the dashboard surface, affecting the normal viewing and use of the dashboard, while also compromising the car's aesthetics and reducing the driver's experience. 2. Adhesive Residue: Poor-quality film can lead to severe adhesive residue on the dashboard, which is difficult to clean. 3. Damage to the Dashboard: If the adhesive of the dashboard film is too strong, removing the film may inevitably cause damage to the dashboard screen.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.