Why is the dashboard light of Vito not bright enough?

Can Heavy Trucks Turn When Using Differential Locks?

Turning is possible with the differential lock engaged because the tires and ground experience sliding friction, which the differential lock can withstand. In off-road recovery situations, the differential lock must also endure significant forces. Forced turning may cause wear to the tires and differential lock, but it won't easily break. Driving at high speeds with the differential lock engaged also does not lead to rollovers. The differential lock should be used in the following sequence: 1. First, engage the inter-wheel differential lock. 2. If the inter-wheel differential lock is ineffective, then engage the inter-axle differential lock. 3. When the vehicle is heavily loaded and climbing a steep slope, only the inter-axle differential lock needs to be engaged, without locking the inter-wheel differential lock. Methods for using the differential lock: 1. The inter-axle and inter-wheel differentials of the drive axle are controlled by the differential lock switch on the dashboard in the cab. 2. When the vehicle is stuck in muddy or slippery conditions, press the differential lock switch while the vehicle is at low speed or stationary, release the accelerator pedal, and steer appropriately. The indicator light will illuminate, indicating that the differential has been correctly engaged.

20

1

Share

Are Heavier or Lighter Roller Weights More Fuel-Efficient?

Roller weights vary from 4 grams to 12 grams, with original equipment typically around 7 grams. Here is information about roller weights: 1. The lighter the rollers, the stronger the acceleration feel at startup; the heavier the rollers, the stronger the acceleration feel at top speed. 2. This is related to centrifugal force. Lighter rollers require less centrifugal force to be thrown outward, meaning a lower RPM is needed for them to engage, resulting in a stronger acceleration sensation during startup. 3. The opposite is true for heavier rollers. If your vehicle's engine is unmodified, overly heavy rollers may cause the bike to barely move at startup—you'll only feel acceleration after the RPM builds up. 4. Roller weights do not affect top speed. As part of the transmission system, they don't increase power output and thus won't raise the maximum speed. They simply allow you to prioritize acceleration in the low, mid, or high speed range based on your needs.

12

1

Share

What are the causes of the parking brake failure in the BMW 5 Series?

The causes of the parking brake failure in the BMW 5 Series are as follows: 1. Insufficient brake oil pressure: lack of oil in the brake master cylinder, brake pipeline rupture, oil pipe joint leakage, or oil circuit blockage. 2. Air in the brake system. 3. Excessive free travel of the brake pedal or excessive brake clearance: poor contact of the brake shoe friction plate, severe wear, or oil contamination. Relevant information about the automatic parking system is as follows: 1. Introduction: Automatic parking, also known as AUTO-HOLD, refers to an automatic braking function. After activating this function, for example, when stopping at a traffic light, there is no need to pull the handbrake, which simplifies the operation by avoiding the use of the handbrake or electronic handbrake. For automatic transmission models, frequent shifting from D to N or D to P is also unnecessary. 2. Working principle: The AUTO-HOLD automatic parking function provides accurate parking force through the slope sensor by the controller. During startup, the parking control unit calculates information provided by the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the driving resistance, the parking brake is automatically released, allowing the car to start smoothly.

4

0

Share

Are Tubeless Tires Dangerous When They Blow Out?

Blowouts while driving are highly dangerous. Tubeless tires can also experience blowouts, but it is rare. Generally, tire blowouts are often caused by tire quality issues or when the tire runs over a hard object while driving, making regular inspection of all tire conditions essential. More detailed information is as follows: Causes of tire blowouts: Any tire can potentially blow out due to operational reasons, road conditions, accidents, etc. Advantages in terms of air leakage: Theoretically, tubeless tires, with their special rubber structure, have certain advantages over inner tube tires in terms of air leakage. For example, small punctures or scratches may not cause rapid air loss and loss of control as quickly as with inner tube tires. Tubeless tires are not universally safe: Special collision accidents, large impacts causing significant damage, tire quality issues, or the age of the tire can all lead to rapid air loss, compromising safety. Regularly check tire pressure: As well as the wear and tear of the tires to ensure driving safety.

4

1

Share

Which Tiguan L model does not have a particulate filter?

The Tiguan L 380 version is not equipped with a particulate filter. The particulate filter can reduce the particles in the engine exhaust emissions, recycle them, reduce vehicle exhaust emissions, increase the environmental friendliness of the vehicle, and reduce pollution to the atmosphere. To check whether a vehicle has a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. In addition, you can carefully check the fault codes in the manual to see if there is a "particulate filter" fault light indicator. Check the label above the oil filler cap. If the oil cap clearly states 0W-20 grade oil, it means that a particulate filter is installed. Check whether there is a cylindrical section on the exhaust pipe behind the three-way catalytic converter. If there is, that is the particulate filter. Location of the particulate filter: The particulate filter is located behind the three-way catalytic converter and in front of the muffler, surrounded by the front and rear oxygen sensors.

4

5

Share

Where is the B28 pressure sensor located in a Mercedes-Benz?

Automotive intake pressure and temperature sensors are generally installed on the intake manifold of the vehicle, positioned on the upper part of the intake manifold to prevent water accumulation. Typically, damage to high-temperature melt pressure sensors is caused by improper installation locations. Forcing the sensor into an overly small or irregularly shaped hole may result in damage to the sensor's diaphragm due to impact. Selecting appropriate tools for machining the installation hole helps control the hole's dimensions. Relevant information about the oxygen sensor is as follows: 1. Introduction: The oxygen sensor is used to detect the oxygen concentration in the exhaust and sends feedback signals to the ECU. The ECU then adjusts the fuel injection volume of the injector to keep the air-fuel ratio of the mixture near the theoretical value. 2. Function: The sensor measures whether there is excess oxygen in the engine's exhaust after combustion, i.e., the oxygen content, and converts this information into a voltage signal transmitted to the engine computer. This enables the engine to achieve closed-loop control targeting the excess air factor, ensuring that the three-way catalytic converter maximizes the conversion efficiency of hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOX) in the exhaust, thereby optimizing the conversion and purification of emission pollutants.

12

5

Share

Why is the dashboard light of Vito not bright enough?

Can Heavy Trucks Turn When Using Differential Locks?

Are Heavier or Lighter Roller Weights More Fuel-Efficient?

What are the causes of the parking brake failure in the BMW 5 Series?

Are Tubeless Tires Dangerous When They Blow Out?

Which Tiguan L model does not have a particulate filter?

Where is the B28 pressure sensor located in a Mercedes-Benz?

How to Distinguish Run-Flat Tires?

Are the appearances of Mercedes-Benz C260L and C200L the same?

What is the Toyota model that is one size larger than the Prado?

What to Do If the Fuel Injector Fails?