Why is the cold air from the JETOUR X90's air conditioner not cooling?

1 Answers
Florence
07/29/25 3:24pm
JETOUR X90's air conditioner not cooling may be due to insufficient refrigerant or a dirty air filter. The reasons for the air conditioner not cooling include: 1. Compressor aging or damage: The cooling function of the air conditioner mainly relies on the compressor. If the compressor belt is loose, aged, or damaged, the air conditioner will only have the blower running, which blows natural air, resulting in no cooling effect. 2. Check if the air conditioner is in recirculation mode. The outside air mode will bring high-temperature air from outside into the car. Air vents: Cold air tends to sink, so check if the air vents are set to blow upward. 3. Too much or too little refrigerant can affect cooling performance. Too much refrigerant can hinder heat dissipation, while too little can reduce cooling efficiency. Over time, dust accumulates on the filter, blocking the cold air from entering the car. If the dryer in the air conditioning system absorbs too much moisture, the refrigerant's moisture may freeze in small passages, affecting the flow of refrigerant.
Was this review help?
19
3
Share
More Forum Discussions

What is a Dashboard?

The car dashboard is a device that reflects the working conditions of various vehicle systems. Below is relevant information: I. Introduction to the Dashboard: Generally composed of a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, and electronic indicator lights, among others. The car dashboard serves as a crucial interface for information exchange between the driver and the vehicle. With the advancement of automotive electronic technology, the amount of information regarding the vehicle's driving conditions and various mechanisms and components has significantly increased. While driving, the driver must be more aware and promptly informed about whether various parameters of the car and engine are normal to take timely measures and prevent accidents. With the progress of electronic technology and the emergence of new sensors and electronic display components, automotive electronic dashboards have been rapidly adopted. Currently, the main types of electronic dashboard display devices used in cars include the following: light-emitting diodes (LEDs), vacuum fluorescent displays (VFDs), and liquid crystal displays (LCDs). II. Types of Electronic Dashboards: 1. Light-Emitting Diodes (LEDs): LEDs were first used in digital watches in the late 1960s and gradually became widely known. They feature a simple structure, small size, and long service life, gradually replacing the incandescent bulbs used in traditional dashboards. However, LEDs perform well in dim environments but are hard to recognize under direct sunlight. LEDs are only suitable for displaying text information and bar graphics. Vacuum fluorescent displays consist of many electrodes encapsulated in a vacuum glass container, where high-speed electron streams strike fluorescent materials to emit light. 2. Vacuum Fluorescent Displays (VFDs): VFDs have a broader color gamut than LEDs, requiring only a relatively low operating voltage for color display and easy connection to control circuits, making them suitable for displaying various texts and images. They offer high reliability, easy readability, and a wide range of color options but are prone to shattering under vibration.
7
1
Share

Can You Learn to Drive at a Driving School on Rainy Days?

Driving schools can continue lessons and tests on rainy days. Here are the relevant details: 1. Driving Schools: A driving school is a training institution that helps people master driving skills, teaches safe and civilized driving, and assists them in passing vehicle administration department exams to obtain a driver's license. Classified by directory, it belongs to the training sector within the transportation industry. However, due to its high degree of marketization, a more appropriate classification would be under the service sector of the tertiary industry. 2. Driver's License Test: The driver's license test (motor vehicle driver's test) is a qualification examination organized by the vehicle administration office of the public security bureau. Only by passing this test can one obtain a driver's license and legally operate motor vehicles.
1
5
Share

Why does the idle speed fluctuate when starting a cold engine?

Fluctuating idle speed, also known as idle shaking. The most fundamental reason for shaking during cold starts or when the car is in neutral is poor combustion in the cylinders. Poor combustion leads to insufficient power output, causing the car to shake. Below is an analysis of the reasons related to idle shaking: 1. Insufficient fuel mixture ratio: The engine control unit (ECU) may not provide an adequate fuel mixture ratio during cold starts. Turning off the engine, removing the key, and restarting usually resolves this issue; 2. Throttle body obstruction: Frequent lugging or poor fuel quality can cause the throttle body to become dirty. Cleaning the throttle body can solve this problem.
10
1
Share

What is included in the vehicle file?

Motor vehicle files include: 1. Original "Motor Vehicle Registration, Transfer, Cancellation/Import Application Form". 2. Copy of the motor vehicle owner's identity document. 3. Original or copy of the motor vehicle's origin certificate. 4. Original duplicate of the vehicle purchase tax certificate or tax exemption voucher. 5. Original third copy of the compulsory traffic accident liability insurance certificate. 6. Original certificate of conformity for domestically produced or imported motor vehicles. 7. Motor vehicle inspection form. Vehicle transfer-out files include: When purchasing a used vehicle from others, additional documents such as the used car transaction invoice, copies of both parties' vehicle owner ID cards, copy of the insurance policy, and motor vehicle inspection form are required.
8
5
Share

Where is the problem when a car is leaking oil?

Here is an analysis of the reasons for car oil leakage: 1. Quality issues: Poor product quality, materials, or craftsmanship; structural design problems. 2. Improper assembly: Incorrect high-speed assembly, unclean mating surfaces, damaged or displaced gaskets, or failure to follow installation procedures. 3. Loose screws: Uneven tightening torque of fastening nuts, stripped threads, broken bolts, or loosening and falling off, leading to operational failure. 4. Aging and failure: Wear beyond limits of sealing materials after long-term use, aging, deterioration, or deformation failure. 5. Over-lubrication: Excessive addition of lubricating oil, excessively high oil level, or use of incorrect oil type.
11
0
Share

Vehicle Environmental Protection Information Onboard List

Includes the manufacturer's declaration of the vehicle's compliance with emission standards and stages, basic vehicle information, environmental inspection details, and key environmental protection configuration information. Below are the relevant details: 1. Basic vehicle information: Model name, trademark, vehicle type, identification method and location for N3 models, vehicle manufacturer name, XX Automobile Co., Ltd., manufacturing plant address. 2. Basic engine information: Engine model, engine system name, brand, engine type (diesel), manufacturer name, production plant address, engine serial number. 3. Inspection information and model parameters: Configuration extension number, inspection report number, inspection agency name, factory inspection results, key environmental protection configurations.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.