Why is the Civic consuming 10 liters per 100 kilometers?

1 Answers
MasonAnn
07/29/25 10:36pm
It may be related to the driving conditions or the driver's habits. Generally, after the break-in period and the first maintenance, the fuel consumption of a new car will decrease to some extent. The following is an introduction about the Civic: 1. Exterior: The Dongfeng Honda Civic has a stylish and elegant appearance with smooth body lines. The hatchback design has undergone significant changes compared to the previous model. 2. Interior: The interior of the Dongfeng Honda Civic is finely crafted with a fashionable design, prominent layering, and rich functional configurations. However, the extensive use of hard plastic results in a less satisfying touch; the seats offer good comfort. 3. Space: The space performance is commendable, with ample legroom in both front and rear seats. The front seats provide generous headroom, while the rear seats are slightly cramped in this aspect. The central floor hump in the rear is not prominent, enhancing practicality. The storage compartments are functional, and the trunk space has also improved compared to the older models.
Was this review help?
17
1
Share
More Forum Discussions

Can Cleaning the Throttle Body Reduce Fuel Consumption?

Cleaning the throttle body can reduce fuel consumption. Definition of Throttle Body: The throttle body is a controllable valve that regulates the air entering the engine. After the air enters the intake manifold, it mixes with gasoline to form a combustible mixture, which then burns to produce work. It connects to the air filter on one end and the engine block on the other, often referred to as the "throat" of the car engine. The throttle body is one of the most critical components in modern fuel-injected engine systems. Definition of Fuel Consumption: Fuel consumption generally refers to the standardized fuel consumption rate. This rate is the vehicle's fuel consumption per 100 kilometers obtained under specific test conditions as stipulated by national standards for certain types of vehicles.
4
5
Share

How to activate the one-touch power window for Geely Vision?

The method to activate the one-touch power window for Geely Vision is: 1. Locate the window lift button (auto) on the left side of the driver's seat, press and hold the button until the window is fully raised; 2. After the window is fully closed, continue to hold the button for approximately 2 to 5 seconds; 3. When you hear a "click" sound, you can then release the button. Taking the Vision 2020 1.5L Manual Premium Edition as an example, its body dimensions are: length 4599mm, width 1747mm, height 1482mm, with a wheelbase of 2615mm. In terms of power, it is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109ps, maximum power of 80kw, and maximum torque of 142nm.
11
3
Share

Which Turn Signal to Use When Exiting a Highway?

When a motor vehicle exits a highway, it should turn on the right turn signal, enter the deceleration lane, and then exit after reducing speed. Extended information about automotive lighting is as follows: 1. Headlights: The main purpose of headlights is to illuminate the road and objects ahead to ensure driving safety. They can also be used to signal overtaking at night by alternating between high and low beams. Headlights are installed on both sides of the front of the vehicle, with 2 or 4 lights per car. The bulb power is 45~60W for high beams and 25~55W for low beams. 2. Fog lights: Fog lights are installed near the headlights or slightly lower. They are used in low visibility conditions such as fog, snow, heavy rain, or dust to illuminate the road and signal to oncoming vehicles. The light is mostly yellow because yellow light has a longer wavelength and better fog penetration. The bulb power is generally 35W.
6
2
Share

What is the difference between Eurocom engines and Cummins engines?

Eurocom is the same as Cummins engines, there is no difference. Eurocom engines are produced in Shanghai. The Italian VM Engine Company is a renowned European developer and manufacturer of small diesel engines, integrating engine research, development, and production, and holds an absolute leading position in the international diesel engine sector. Additional information is as follows: 1. Introduction: Cummins engines are renowned for their reliability, durability, and fuel economy, and have consistently maintained a leading position in the industry amidst fierce competition to meet increasingly stringent emissions standards for automobiles, off-road mobile equipment, and marine engines. 2. Maintenance: Maintenance is key to reducing operating costs. A diesel engine requires regular maintenance according to the maintenance schedule to ensure efficient operation. Preventive maintenance is the easiest and most economical form of maintenance. It allows the maintenance department to perform work at the appropriate time. The maintenance cycles and content may vary slightly depending on the engine series and model.
20
3
Share

What are the solutions for a clicking sound when shifting gears?

The solutions for a clicking sound when shifting gears are: 1. Check if the transmission oil is sufficient, and add more if the oil level is too low; 2. Fully depress the clutch every time you shift gears. If the issue does not improve significantly, check the clutch clearance, free travel, and other parameters; 3. Replace the gears and synchronizer; 4. Replace the bearings and thrust washers. The reasons for a clicking sound when shifting gears are: 1. Incomplete clutch disengagement; 2. Severe wear of gears or synchronizer in the transmission, leading to excessive clearance; 3. Excessive clearance between the bearing and the spline on the shaft; 4. Severe wear of the shift fork shaft.
15
1
Share

Can 92 octane unleaded gasoline be used if the requirement is above 92 octane?

Can 92 octane unleaded gasoline be used if the requirement is above 92 octane? The following are the differences between 92 octane and 95 octane gasoline: 1. Different n-heptane content: 95 octane gasoline contains 5% n-heptane; 92 octane gasoline contains 8% n-heptane. 2. Different isooctane content: 95 octane gasoline contains 95% isooctane; 92 octane gasoline contains 92% isooctane. 3. Different anti-knock properties: Different gasoline octane ratings represent different fuel anti-knock properties. The higher the octane rating, the better the anti-knock performance. 95 octane gasoline has better anti-knock performance than 92 octane gasoline.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.