Why is the cigarette lighter in Wuling Hongguang S not working?
3 Answers
Due to prolonged use, repeated insertion and removal can cause the spring clip to loosen, resulting in the cigarette lighter not receiving power. Another possible reason is that repeated plugging and unplugging, along with improper use, may lead to a short circuit in the wiring, burning out the fuse. Solutions for a non-working cigarette lighter: When you find that the cigarette lighter in your car is not working, you can first try connecting a cigarette lighter of the same model. If it works normally, the issue lies with the lighter itself, and you can simply replace it. If it still doesn't work, the problem is likely with the fuse of the cigarette lighter. Precautions for car cigarette lighters: The general maximum power capacity of a cigarette lighter is 120W. Exceeding this value can easily cause the cigarette lighter to overload, leading to various hazards such as burning out the lighter. Therefore, when using external devices, always check the maximum power rating and try to use it at less than 120W.
When the cigarette lighter in the Wuling Hongguang S isn't working, the first thing I did was check the fuse. It's located in the fuse box under the steering wheel—refer to the manual for its exact position. The most common issue is a blown fuse for the cigarette lighter, which can happen if the device you plugged in has too high a load or there's a short circuit. Next, try removing the cigarette lighter and clean the socket to check for any dirt or rust, as accumulated dust can cause poor contact and result in no power. Also, verify if the vehicle's battery voltage is sufficient by starting the car with the key and testing again. If these steps don't help, it might be a wiring issue, such as a broken wire or a loose connector, especially in older vehicles where wiring harnesses can degrade over time. It's best to use a voltage tester to check if there's 12V in the socket—if not, there's definitely a problem. I often use the cigarette lighter to charge my phone, but if this issue arises, it's safer to stop and avoid DIY fixes. Instead, take the car to a professional repair shop for a thorough inspection to prevent further damage. Safety first—don't fiddle with it while driving.
The cigarette lighter not working in the Wuling Hongguang S is most commonly caused by a fuse failure. Since I'm not very handy, I started with the simplest step: open the vehicle's fuse box, usually located under the driver's seat, and find the fuse number for the cigarette lighter. If the color has changed or the middle is broken, it's blown—just replace it with one of the same amperage; you can buy a bunch for a few dollars at the supermarket. If there's still no power after replacement, check if the socket itself is faulty—internal contact wear or jamming often occurs, especially with frequent use in rainy weather. Also, test the cigarette lighter plug by trying another device. Wiring issues like a short circuit (e.g., crushed wires under the seat causing leakage) or insufficient battery power leading to unstable supply may be the culprit. I think regular cleaning of the cigarette lighter port is necessary for older vehicles to prevent issues. If problems arise, don't delay—seek professional help for quick inspection and repair to save time and hassle.
