Why is the Chery windshield wiper not moving?
4 Answers
Chery windshield wiper not moving reasons are as follows: Motor circuit issues: It could be that the motor's connector is not properly connected, requiring reconnection of the circuit to function. Turn the wiper to the highest setting and gently move it by hand to see if it rotates. If it can rotate, the issue might be rust on the wiper sensor, which can be resolved by cleaning it. Fuse problem: Check if the wiper's fuse is intact and whether the fuse is blown. Then inspect if the motor is burnt out, if the linkage is slipping, or if there's poor contact in the combination switch. Control lever issue: Check if the control lever is correctly connected to the wiper arm. Some arms are fixed to the wiper arm with screws, while others are locked with a convex snap.
My Chery wipers stopped working. I encountered this issue last time when driving long-distance in the rain, which was absolutely terrifying. Common causes include a blown fuse, wiper motor failure, or poor switch contact. If it's a fuse issue, it's the simplest to fix. Go to the fuse box (usually located at the lower left corner of the driver's seat), pull out the corresponding fuse, and check if the wire in the middle is broken. If it is, replace it with a fuse of the same amperage—just 10 yuan to solve. If not, the motor might be stuck or the linkage has come off. You'll hear strange noises when turning it on. You’ll need to open the front cover to check the connections. I’ve done it twice myself—it’s not complicated but requires a wrench. A faulty switch could also be the problem; try moving it back and forth a few times to see if there’s any response. Usually, avoid letting sand and mud enter the wiper system when washing the car to reduce the chance of failure. If the wipers stop working, don’t force them—pull over safely in the rain and call for roadside assistance. Always keep spare fuses in your car—they can be lifesavers in critical moments.
Last time I was driving in the rain, my Chery windshield wiper suddenly stopped working, completely blurring my vision—super dangerous! I immediately turned on the hazard lights and pulled over. After checking, I found the fuse had blown, and a simple replacement fixed it. Common causes are usually one of a few things: the fuse aging or burning out due to excessive current, excessive wear on the wiper motor, oxidized switch contacts causing signal failure, or rusted wiper linkage jamming. If you notice the wipers aren’t working before it rains, don’t drive—wait for clear weather to check the fuse box. Locate the fuse labeled for the wipers, test it, and if it’s intact, check for leaks in the motor or switch. I once borrowed a multimeter to measure the voltage. Don’t be lazy and force-start it, as that could damage more parts. Every year before the rainy season, I clean out leaves and snow from the wiper groove to prevent jams. Small issues fixed quickly can save you hundreds!
My Chery has experienced a situation where the wipers wouldn't move. Let me briefly list a few possible causes. The most common is a blown fuse, which can be checked by opening the small compartment below the steering wheel. If the fuse is intact, the wiper motor might be burnt out - you'll hear a humming sound when starting but no movement, requiring disassembly for replacement. Another possibility is poor contact in the switch - try pressing it several times. The linkage could also be stuck, which often happens when frozen in winter. When I encountered this without tools, I asked a friend to help with repairs. Regularly replacing wiper blades extends their lifespan. Always check the fuse promptly when discovering issues, otherwise driving in rain becomes too risky.
