Why is the car key's yellow light on?

What is the reason for the brake lights staying on after the engine is turned off?

If the brake lights remain on after the car is turned off, it may be due to an unswitched light switch or wiring issues. The specific reasons and solutions are as follows: Headlight switch in the automatic position: When the headlight switch is in the automatic position, not only the rear lights but also the front lights stay on after the vehicle is turned off. The lights will automatically turn off after the vehicle is parked for a while or after locking the car. The solution is to wait a few minutes for the lights to turn off automatically. Damaged brake light switch or faulty taillight wiring: A damaged brake light switch can cause the rear taillights to stay on continuously. Solution: Replace the switch to resolve the issue. Faulty taillight wiring can also lead to this phenomenon. Solution: Visit a service center for inspection as soon as possible. Lack of brake fluid: Brake fluid plays a crucial role in the vehicle's braking system. When the driver presses the brake pedal, the force applied is transmitted by the master cylinder piston through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. Function of car brake lights: The purpose of the rear brake lights and high-mounted stop lamp is to make it easier for vehicles behind to notice when the front vehicle is braking, thereby helping to prevent rear-end collisions. The brake indicator on the dashboard serves to inform the driver when the rear brake lights are activated.

6

3

Share

How many seconds does the Jetta VS5 take to accelerate from 0 to 100 km/h?

According to official data, the Jetta VS5 1.4T model accelerates from 0 to 100 km/h in 9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in naturally faster acceleration. The BMW X2 has a maximum torque of 220 Nm and accelerates from 0 to 100 km/h in 9.6 seconds. The Jetta VS5 1.4T model has a torque of 250 Nm and accelerates from 0 to 100 km/h in 9 seconds. Transmission efficiency: The transmission is the medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Jetta VS5 is equipped with a 6-speed automatic manual transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit is Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The BMW X2 has a power-to-weight ratio of 90 Hp/T and accelerates from 0 to 100 km/h in 9.6 seconds. The Jetta VS5 has a power-to-weight ratio of 111 Hp/T and accelerates from 0 to 100 km/h in 9 seconds.

2

5

Share

What are the items and duration of Nissan's first maintenance?

The entire first maintenance takes about 2 hours. For the Nissan Sylphy, the first maintenance is due at one month or 1000 kilometers, whichever comes first. The maintenance items include changing the engine oil and oil filter, cleaning the air filter, checking the levels of various fluids, inspecting the generator belt and wiper blades for damage, checking tire pressure, and examining the chassis and all vehicle switches. First maintenance items: Mainly involve replacing the engine oil and oil filter, checking doors and engine hood, ensuring lights are functioning properly, checking tire pressure, performing tire rotation, inspecting the tire pressure monitoring system for abnormalities, conducting wheel alignment and balancing, cleaning and inspecting windshield and wiper blades, checking the smooth operation of the accelerator pedal, inspecting the brake pedal operation, verifying the parking brake operation, examining all components of the seat belt system, checking for any changes in steering condition such as excessive play, heavy steering, or unusual noises, and ensuring all warning lights and buzzers are functioning correctly. Maintenance precautions during the break-in period are as follows: During cold starts, it's best to wait until the water temperature preheats to above 40 degrees Celsius before starting. When starting, gently press and slowly release the clutch and accelerator pedal, and choose good road conditions for driving. Avoid revving the engine when parking. Control your driving speed appropriately; avoid excessively high speeds, preferably keeping it between 50-80 km/h. After driving 1500 kilometers, you can gradually increase the engine speed and vehicle speed to the maximum allowed by the vehicle, but avoid stomping on the accelerator to ensure that pistons, cylinders, and other important components increase their load under moderate conditions. Avoid using a single gear for extended periods; start in a low gear and gradually shift to higher gears, driving in a progressive manner. Avoid the phenomena of high speed in low gear or low speed in high gear.

14

0

Share

What brand of car is Sahara?

It refers to the JEEP Wrangler Sahara model. The Wrangler is the most robust model in the Jeep series, a true ORV off-road vehicle. It is a model under the JEEP brand, which is owned by Chrysler in the United States. There are currently 5 available models of the Jeep Wrangler, as follows: The Wrangler 2022 2.0T High Altitude Bahama Sand Pink Special Edition, High Altitude Jungle Green Limited Edition, and High Altitude 4-Door Edition: dimensions are 4882x1894x1838 (mm). The 2022 2.0T Rubicon 4-Door Edition: dimensions are 4882x1894x1848 (mm). The 2022 2.0T Sahara 2-Door Edition: dimensions are 4334x1894x1839 (mm). All models are equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 266 HP, maximum power of 195.4 kW, and maximum torque of 400 Nm. The main models under the Jeep brand include the Wrangler, Compass, Cherokee, Grand Commander, Grand Cherokee, Renegade, Patriot, Commander, Liberty, and others. Important milestones in Jeep's development history are as follows: In 1938, the U.S. military requested all domestic automobile manufacturers to develop a lightweight reconnaissance vehicle to replace traditional three-wheel motorcycles. In 1940, the U.S. government increased pressure on all domestic automobile manufacturers. A tender was issued to 135 manufacturers, with only Bantam Company winning the bid. In 1941, responding to the U.S. military's requirements, Jeep produced the first batch of durable and reliable Willys MB vehicles in just 75 days. These vehicles could be used for individual combat or transport and played a significant role in World War II. In 1946, the Jeep Willys Station Wagon, the first true SUV in history and the first all-steel station wagon, was launched, catering to both family and business needs. In 1948, Jeep introduced the Jeepster youth series. In 1950, the Jeep Willys Jeepster was unveiled at the Chicago Auto Show. In the fall of 1962, the world's first luxury SUV—the Jeep Wagoneer—was launched. With its unparalleled four-wheel-drive capability, comfortable interior, and spacious cabin, it set the standard for luxury SUVs. In 1986, Jeep was acquired by Chrysler. In 1993, the first-generation Jeep Grand Cherokee (internally codenamed ZJ) was introduced. This model featured Jeep's unique Quadra-Coil system, providing excellent balance and comfort. In 2013, the new Grand Cherokee was launched. While retaining Jeep's traditional rugged elements, it significantly increased its smoothness to make it more urban-friendly.

4

3

Share

What are the power sources of new energy vehicles?

New energy vehicles mainly derive their power from four aspects: pure electric, fuel cell, hydrogen energy, and gas. Below are the detailed introductions: Pure Electric: New energy vehicles primarily rely on electric power for propulsion. Most vehicles are directly driven by electric motors. Some vehicles have motors installed in the engine compartment, while others use the wheels themselves as the rotors for four motors. The main challenge lies in energy storage technology. They do not emit harmful gases that pollute the atmosphere. Even when the electricity consumption is converted into emissions from power plants, pollutants other than sulfur and particulate matter are significantly reduced. Since most power plants are located far from densely populated cities, the harm to humans is minimized, and the stationary nature of power plants makes it easier to eliminate concentrated harmful emissions, with relevant technologies already in place. Fuel Cell: Fuel cell vehicles refer to those that use hydrogen, methanol, etc., as fuels to generate electric current through chemical reactions and rely on electric motors for propulsion. The energy in the battery is not obtained through combustion but is directly converted into electricity or electrical energy through the chemical interaction of hydrogen and oxygen. The chemical reaction process of fuel cells does not produce harmful byproducts, making fuel cell vehicles pollution-free. The energy conversion efficiency of fuel cells is 2 to 3 times higher than that of internal combustion engines. Therefore, fuel cell vehicles are considered ideal in terms of energy utilization and environmental protection. Hydrogen Energy: Hydrogen energy new energy vehicles are a mode of transportation that truly achieves zero emissions, emitting only pure water. They boast the advantages of no pollution, zero emissions, and abundant reserves. Thus, hydrogen-powered vehicles are the best alternative to traditional vehicles. Compared to traditional power vehicles, hydrogen-powered vehicles cost at least 20% more. Gas: Gas-powered vehicles refer to those that use compressed natural gas, liquefied petroleum gas, and liquefied natural gas as fuels. Governments worldwide are actively seeking solutions to this issue and have begun adjusting the fuel structure of vehicles. Due to their excellent emission performance, adjustable fuel structure, low operating costs, mature technology, and safety and reliability, gas-powered vehicles are considered the most ideal alternative fuel in the world.

3

0

Share

Why can't the Geely Xingrui use 92-octane gasoline?

According to the official vehicle manual recommendation, the Geely Xingrui should use 95-octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, the appropriate octane rating for the Geely Xingrui can also be found on the fuel tank cap, which will be clearly marked. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the application of new technologies, the gasoline grade can no longer be solely determined by the compression ratio. High compression ratios can also be tuned to use lower-octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Geely Xingrui occasionally uses the wrong gasoline grade, simply switch back to the correct octane rating after the current tank is used up. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Because the octane number is too low, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If combustion occurs before the spark plug fires during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without significant damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on the pistons and cylinders, and in severe cases, cylinder scoring.

14

2

Share

Why is the car key's yellow light on?

What is the reason for the brake lights staying on after the engine is turned off?

How many seconds does the Jetta VS5 take to accelerate from 0 to 100 km/h?

What are the items and duration of Nissan's first maintenance?

What brand of car is Sahara?

What are the power sources of new energy vehicles?

Why can't the Geely Xingrui use 92-octane gasoline?

Where is the rearview mirror heating button on the 2021 Excelle?

What are the motions of a car?

What car brand has a logo with five vertical bars?

What is the 0-100 km/h acceleration time of the Genesis G80?