Why is the car consuming a lot of oil?

2 Answers
ErinAnn
07/24/25 10:45am
Excessive oil consumption in a car is mostly caused by natural wear and tear. As the vehicle's mileage increases, the wear between the pistons and cylinders gradually intensifies. When this wear reaches a certain level, cylinder blow-by begins, leading to oil burning. Additionally, improper maintenance can also contribute to this issue. Related explanations: 1. Scheduled engine maintenance: Following the recommended mileage for engine maintenance will extend the engine's lifespan. Conversely, exceeding the maintenance interval (i.e., delaying maintenance) can lead to dirty oil, where impurities in the oil accelerate cylinder wear. 2. Selecting appropriate parts for the vehicle model: Air filters, oil filters, and engine oil should be chosen based on the car's specific model. Using unsuitable parts can result in inadequate purification of gas impurities entering the cylinders, allowing dust particles to enter and accelerate cylinder wear. Poor-quality oil filters may fail to effectively filter impurities from the oil.
Was this review help?
17
3
Share
LeRobert
08/11/25 5:46am
My car's fuel consumption has been alarmingly high recently, using 10 liters for every 100 kilometers, which is really worrying. This issue might be related to driving habits, like my tendency to stomp on the accelerator and brake suddenly, putting extra load on the engine and naturally causing fuel consumption to soar. Also, if the air filter is too dirty, it restricts airflow, leading to incomplete fuel combustion. Low tire pressure is another factor, increasing rolling resistance and making the car work harder. Additionally, prolonged use of air conditioning or carrying heavy loads can consume extra fuel. It's advisable to regularly check the vehicle, clean the filters, adjust tire pressure, and drive more gently at a steady speed to save a lot of fuel. Don't be lazy like me and neglect maintenance until it's too late—cars, like our bodies, need regular care.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Reminder on the Roewe RX3?

The method to reset the maintenance reminder on the Roewe RX3: 1. Turn off the ignition switch and simultaneously press the two arrow buttons; 2. Turn on the ignition switch, wait for about 3 seconds, then release the two arrow buttons; 3. The zeroing menu will appear, asking if you want to reset. Press and hold the SET button for more than 3 seconds; 4. Press the MODE button, turn off the ignition switch, and the maintenance reminder will be reset. In terms of appearance, the front face of the Roewe RX3 features the Roewe family's shield-shaped grille, integrated with the headlights on both sides. The side lines are smooth and clean, with a concise design that gives the side profile a robust look. Regarding body dimensions, the Roewe RX3 measures 4408 mm in length, 1804 mm in width, and 1651 mm in height, with a wheelbase of 2625 mm.
7
5
Share

What brand is the Hellcat car?

Hellcat is a Dodge brand vehicle and also the high-performance variant of the Dodge Challenger. Dodge is headquartered in the United States, using the Dodge brothers' surname as its logo, with both the small ram and big ram emblems appearing on its vehicles. The Hellcat features a redesigned and upgraded full-body sports kit, with suspension tuning leaning towards a stiffer setup. The bottom spoiler and large-diameter dual exhaust pipes more thoroughly showcase its formidable performance. In terms of power, the Hellcat is equipped with a 6.2L supercharged engine delivering a maximum horsepower of 707PS. Regarding body dimensions, the Hellcat measures 5020mm in length, 1900mm in width, and 1450mm in height, with a wheelbase of 2946mm.
15
4
Share

How to activate the window auto function?

AUTO translates to "automatic" in English. When the AUTO function on the window is activated, simply pressing the window open/close button once will automatically open or close the window without the need to hold it down. If there is an "auto" label on the window control button, it indicates that the window has a one-touch up/down feature. More related information is as follows: 1. Some cars do not have the one-touch up/down feature on all four windows, some only have it on the driver's side window, some have it on both the driver and front passenger windows, and some high-end cars have this feature on all four windows. 2. AUTO in the context of cars can have different meanings in different places. For example, the Auto in green text above refers to automatic air conditioning, where the car can automatically adjust the air conditioning temperature and airflow based on the ambient temperature, eliminating the need for manual adjustment. There is also a large red letter A, which represents the engine's energy-saving start-stop function, a type of energy-saving mode equipped on some vehicles.
9
5
Share

What are the reasons for the blower not working?

The reasons for the blower not working are: 1. Fuse failure; 2. Blower relay failure; 3. Internal failure of the blower motor; 4. Power transistor or blower switch failure; 5. Circuit failure; 6. Air conditioning control unit failure. More details are as follows: 1. The working principle of the blower is similar to that of a centrifugal fan, except that the air compression process is usually carried out under the action of centrifugal force through several working impellers (or stages). 2. The blower has a high-speed rotating rotor, and the blades on the rotor drive the air to move at high speed. The centrifugal force causes the air to flow along the involute shape of the casing to the blower outlet, and the high-speed airflow has a certain wind pressure. New air enters from the center of the casing to replenish.
13
0
Share

What is Crawl Mode?

Crawl mode, fully known as Low-Speed Cruise Driving Assistance System, is also referred to as the foolproof off-road system. It ensures that the vehicle does not experience wheel slippage or get stuck due to excessive speed. The system autonomously controls the engine's torque output, transmission system, and brakes, allowing the car to traverse rough terrain at an extremely slow pace. Below are relevant details: 1. In practical applications, the crawl function eliminates the need for the driver to operate the throttle and brakes, as the vehicle can control itself. Additionally, it adjusts torque output based on road condition feedback and electronically distributes braking force to all four wheels, ultimately preventing wheel slippage. 2. In crawl mode, the driver only needs to focus on steering without pressing the throttle or brakes. This avoids unintended throttle input changes caused by bumps on rough terrain. Located at the lower right of the central console gear lever, a rotary knob allows switching between three different speed settings.
20
1
Share

Is the new Besturn B70 fuel-consuming?

The official comprehensive fuel consumption (L/100km) provided for the Besturn B70 is 7.5-9.3L/100km, which is relatively economical in terms of fuel consumption. Additional information: 1. Fuel consumption calculation: Vehicle fuel consumption is calculated based on the fuel consumed per 100 kilometers (usually referring to 100 kilometers). The method for calculating actual fuel consumption: Average fuel consumption = (Total fuel added - Last fuel added) / Mileage traveled. 2. Advantages of the Besturn B70: The new Besturn B70 adopts a 3H structural body design, complemented by Bosch's latest ESP9 system, 8-channel parking radar, reverse camera, tire pressure warning function, and many other active and passive safety equipment that reflect technological strength, achieving a 5-star safety rating. The new Besturn B70 is also equipped with a wealth of mature intelligent features, including automatic lighting control system, cruise control, etc., further enhancing the premium feel and intelligent technology level of the new Besturn B70.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.