Why is the car air conditioning pipe very cold but the air outlet is not cold?

Which Side Do Chinese Cars Drive On?

Chinese cars drive on the right side, and this right-hand driving practice is historically determined. Historical reasons for right-hand driving in China: Initially, influenced by Britain, cars in Shanghai, Zhejiang, Guangdong, and other regions of China generally drove on the left; while in Shandong, Zhili, and other areas influenced by the United States, driving was on the right. In the 1930s, regulations gradually mandated that all vehicles drive on the right, and even in Japanese-occupied areas like Northeast China, right-hand driving rules were adopted, leading to a basic unification of the rules nationwide. One country, two systems in Chinese road traffic: Due to historical reasons, Hong Kong follows left-hand traffic rules, while the mainland drives on the right. After Hong Kong's return, the mainland and Hong Kong adopted a one country, two systems solution. Mainland vehicles entering Hong Kong must follow Hong Kong's left-hand driving rules. Conversely, Hong Kong vehicles entering the mainland must also adapt to local customs.

12

3

Share

How Long Does It Take for Formaldehyde in a New Car to Dissipate?

It takes several months to remove formaldehyde from a new car. During summer, the process can be accelerated. The most effective and simplest method is to park the car under direct sunlight with the windows open for ventilation. Typically, formaldehyde will mostly dissipate within a week. Activated Charcoal for Formaldehyde Removal: This is the most commonly used method in daily life and is cost-effective. However, activated charcoal tends to reach adsorption saturation quickly and needs replacement or sun-drying afterward. Additionally, if the amount of activated charcoal is insufficient, it won’t have much effect on formaldehyde removal. Opening Car Windows: Opening the windows allows natural air circulation, which helps discharge harmful gases outside—simple yet effective. Try to keep the windows open for extended periods to ventilate the car interior. Using an electric fan can also help accelerate indoor-outdoor air exchange, ensuring forced ventilation for a month.

14

1

Share

Is It Safe to Drive on the Highway with Car Tire Pressure at 2.4bar?

Driving on the highway with car tire pressure at 2.4bar is safe. A tire pressure of 2.4bar generally falls within the normal range for vehicles, making it perfectly suitable for highway driving. Introduction to Standard Tire Pressure: According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Importance of Tire Pressure: Both overinflation and underinflation can shorten the lifespan of tires. Underinflation increases tire deformation, leading to cracks on the sidewalls and excessive flexing, which generates heat, accelerates rubber aging, causes fatigue in the cord layers, and may break the cords. It also increases the tire's contact area, speeding up wear on the tire shoulders. Overinflation overextends the tire cords, reducing the tire's elasticity and increasing the load during driving. This can cause internal cracks or blowouts upon impact and accelerates tread wear while reducing puncture resistance.

7

3

Share

What are the main components of the crankshaft flywheel assembly?

The main components of the crankshaft flywheel assembly include the crankshaft, flywheel, bearing shells, oil baffle, pulley, torsional vibration damper, etc. The crankshaft is a crucial component within the engine, serving as the power output shaft that connects to the connecting rods. Below are relevant details about the crankshaft: 1. The automotive engine contains connecting rods, where the small end secures the piston and the big end connects to the crankshaft. The crankshaft and connecting rods convert the piston's up-and-down motion into rotational motion. 2. The crankshaft is connected to the flywheel, which in turn connects to the transmission. Power is output from the crankshaft to the transmission, then transmitted to the wheels via the driveshaft and half-shafts. 3. The engine's flywheel features a ring gear on its outer surface, which engages with the starter motor's gear to enable engine starting. The flywheel also enhances engine smoothness and reduces vibrations. Some vehicles employ dual-mass flywheels to further improve engine smoothness and ride comfort.

5

Share

Where is the Clutch Disc Installed?

The clutch disc is installed between the pressure plate and the engine flywheel. There is a spline in the center of the clutch disc, which secures a transmission shaft. This transmission shaft serves as the power input shaft of the gearbox. The clutch is part of the car's transmission system. Without the clutch, the car cannot operate normally. Below is some relevant information about the clutch disc: 1. The main components of the clutch include the clutch disc, pressure plate, and release bearing. The clutch pressure plate is fixed to the engine flywheel, and there is a diaphragm spring on the pressure plate that can press the clutch disc tightly. When the driver depresses the clutch pedal, the clutch disengages, and the engine's power cannot be transmitted to the gearbox. When the driver releases the clutch pedal, the clutch engages, allowing the engine's power to be transmitted to the gearbox. 2. As the car's mileage increases, the clutch will wear out. If the clutch disc is severely worn, it needs to be replaced. Replacing the clutch disc is a complicated process. To replace the clutch disc, the connection between the engine and the gearbox must first be disassembled, then the gearbox must be lifted off the car, and finally, the pressure plate must be removed to access and replace the clutch disc.

15

0

Share

What Does Engine Torque Mean?

Engine torque refers to the rotational force output from the crankshaft of an engine. Under a fixed power condition, it is inversely proportional to the engine speed—the higher the speed, the lower the torque, and vice versa. It reflects the vehicle's load capacity within a certain range. Like engine power, torque is one of the primary indicators of an engine, influencing vehicle performance, including acceleration, climbing ability, and suspension. Below is an introduction to engine torque levels: 1. For family cars, higher torque results in better acceleration; for off-road vehicles, higher torque enables steeper climbing; for trucks, higher torque allows for greater load capacity. Therefore, higher torque is generally preferable. 2. Greater torque improves the vehicle's responsiveness. Comparing vehicles with similar engine types, higher torque output means greater load capacity, better acceleration, stronger climbing ability, fewer gear shifts, and relatively reduced wear on the vehicle. Especially during zero-speed starts, vehicles with higher torque demonstrate superior speed-boosting capabilities. 3. For engines with the same displacement, higher torque indicates a better engine. When driving, this translates to a more responsive and enjoyable experience, with quick acceleration and a strong "back-pressing" sensation. Currently, one important metric for evaluating a vehicle is its 0-100 km/h acceleration time, which is directly determined by the engine's torque.

2

3

Share

Why is the car air conditioning pipe very cold but the air outlet is not cold?

Which Side Do Chinese Cars Drive On?

How Long Does It Take for Formaldehyde in a New Car to Dissipate?

Is It Safe to Drive on the Highway with Car Tire Pressure at 2.4bar?

What are the main components of the crankshaft flywheel assembly?

Where is the Clutch Disc Installed?

What Does Engine Torque Mean?

What is the lifespan of the timing chain on the Roewe 350?

How long does it generally take to charge a car with a dead battery?

Is It Normal for Car Brake Pads to Shed Brake Dust?

How long after the expiration of a driver's license can it be normally renewed?