Why is the car air conditioning not cooling well?

1 Answers
BradyLee
07/29/25 4:19pm
The reasons for poor air conditioning cooling effect include insufficient Freon and inadequate power supply voltage. Below are the specific explanations: 1. Insufficient Freon: This is a normal situation where the air conditioning is not completely failing to cool, but the cooling effect is not good enough. This is because older air conditioning systems use Freon as a refrigerant, which can evaporate over time with prolonged use. 2. Inadequate power supply voltage: The normal starting voltage for air conditioning is around 220V. In China's power supply system with a phase voltage of 220V and line voltage of 380V, almost all compressors can start with a voltage above 200V. If the air conditioning cooling is poor due to this situation, the power supply should be checked. If the grid voltage is too low, users should install a power voltage regulator to ensure the voltage reaches 220V, allowing the air conditioning to function properly.
Was this review help?
9
2
Share
More Forum Discussions

What to Do About Brake Pad Noise?

Here are the causes and solutions for brake pad noise: 1. Warped Brake Disc: Similar to long downhill braking in summer, prolonged braking can cause overheating and deformation of the disc. Symptoms include noise when the disc rotates and rubs against the brake pads. Additionally, oil or dirt on the disc that is not cleaned in time can also cause noise between the disc and pads. Use a disc wrench to slightly adjust the disc. If there is contact between the wrench and the disc at any point, it indicates severe disc deformation, and the disc should be replaced promptly. 2. Improperly Adjusted Caliper: Currently, the mainstream mounting method for mountain bike disc brakes is the direct A-post installation, but the screw holes are prone to stripping. Some use the older B-post adapter installation, which avoids stripping but complicates the adapter positioning. If the caliper is not properly positioned, it directly causes friction between the disc and pads. Tighten the screws and rotate the wheel to resolve the issue.
12
3
Share

How to Check the Condition of a Car Battery?

Car batteries are equipped with an inspection eye, which displays different colors indicating various states of the battery. By observing the color changes of the inspection eye, you can determine the condition of the battery. There are primarily three states: green or blue indicates good condition, black or red means the battery needs charging, and white suggests that the battery needs replacement. Below is some relevant information: Introduction to Car Batteries: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, the term 'battery' refers to a lead-acid battery, which is mainly made of lead and its oxides, with a sulfuric acid solution as the electrolyte. Batteries are most vulnerable to low temperatures, as their capacity is significantly lower in cold environments compared to normal temperatures.
4
0
Share

How to Turn On the Left and Right Turn Signals?

Turn signal switch is located below the steering wheel. Push down for left turn signal, push up for right turn signal, and the middle position is off. More related information is as follows: 1. Turn signals are the most critical devices representing vehicle dynamic information: Installed at the front and rear of the vehicle, they are activated when turning, providing safety assurance for driving. For safety, please use turn signals as required to allow others to anticipate your vehicle's movement and make accurate judgments. 2. Types of turn signals: Turn signals use flashers to achieve light blinking. They can be mainly divided into three types: resistance wire type, capacitor type, and electronic type. 3. Added "one-touch three-flash" quick function: With automotive development, many vehicles now have this quick function on their hazard light switches.
19
2
Share

What brand is Keihin?

KEIHIN (Keihin) Corporation is a renowned Japanese manufacturer of solenoid valve bodies. The following is an introduction to KEIHIN: 1. Main products include: electric valves, solenoid valves, positioning water valves, metering valves, pneumatic-operated valves, corrosion-resistant automatic valves, and various other types of valves. 2. Application industries: KEIHIN products are primarily used in refrigeration, shipbuilding, power generation, steel, environmental protection, metallurgy, and other industries. Additional information: 1. Small commonly used solenoid valves: MSD, M3P. 2. Medium-high pressure commonly used solenoid valves: VSPD, VSPD-LN2M, VS3P.
10
5
Share

How Are Points Deducted When the Vehicle License and Driver's License Don't Match?

When driving on the road, it is mandatory to carry valid vehicle license and driver's license in the vehicle. If points are deducted, it doesn't matter if the driver's license and vehicle license don't match; just handle the violation normally. Below is a detailed introduction to the relevant content: 1. Normal status: It may be that you have no unprocessed violation records, or your recent violation records have not been uploaded yet. 2. Unprocessed violation status: This means there are unprocessed and unpaid violation records on your vehicle license. Note that this is just a record. 3. On-site violation: For on-site violations, the traffic police will record the driver, and only the on-site driver can handle the violation. However, this has nothing to do with the owner of the vehicle license. Therefore, when deducting points for vehicle violations, the points are deducted from the driver's license, based on the name on the driver's license.
3
3
Share

Analysis of Early and Late Steering in Right-Angle Turns

Here is the detailed analysis of early and late steering in right-angle turns: 1. Identifying the vehicle's lateral position point: When making a left turn within a relatively narrow range, the vehicle should stay as far to the right as possible, usually maintaining a safety distance of only 30 cm from the right-side boundary line. 2. The timing point for steering wheel operation: This is the point when the vehicle is in the longitudinal position to turn the steering wheel to the left. Turning too early will cause the inner corner to be pressed, while turning too late will cause the front boundary line to be pressed. 3. Determining the key point from outside the vehicle: In fact, the most appropriate position to turn the steering wheel is when the axle of the left front wheel is exactly on the horizontal extension line of the corner. Therefore, it's advisable to first drive the vehicle to the appropriate position and then get into the car to confirm that key point. 4. Key point too early or too late: If the key point is too early, the left front wheel will press against the corner or be too close to it, which is very unsafe. If the key point is too late, the right front wheel will press against the opposite boundary line or the body will sweep over it during the turn.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.