Why is the car air conditioning not cooling effectively?

2 Answers
DeXavier
07/29/25 5:23am
The reasons why the car air conditioning is not cooling effectively are as follows: 1. Insufficient Freon: When the ambient temperature is around 35 degrees Celsius, the air conditioning shows a low pressure of 0.45mp and a high pressure above 2.5mp, with a static pressure of 1.1-1.2mp. This usually occurs in older air conditioning systems that have been in use for three to four years. The cooling effect of the air conditioner decreases. Older air conditioners use Freon as a refrigerant, which can evaporate over time. Therefore, users only need to visit a professional air conditioning repair shop to have it refilled. Additionally, improper installation causing Freon leakage or issues with the machine itself cannot be ruled out. 2. Power supply voltage: Insufficient power supply voltage. The normal starting voltage for air conditioning is 220v+-10%. In China's power supply system with a phase voltage of 220v and a line voltage of 380v, almost all compressors can start at 200v or above. At 180v or above, 70-80% can start, and at 160v or above, only a few can start. Below 160v, it is almost impossible to start. Based on experience, a starting voltage above 190v is more reliable for the compressor. 3. Insufficient power: The general selection principle for air conditioning power is: 150-250w/square meter for cooling and 250-350w/square meter for heating. Additionally, factors such as space height, orientation, sealing performance, and number of occupants should be comprehensively considered.
Was this review help?
6
3
Share
OElijah
08/12/25 8:58am
The weather has been getting hotter recently, and I noticed that the air blowing from my car's air conditioning isn't cool at all, making the interior feel like a steamer. There could be several possible reasons, such as insufficient refrigerant—this is the liquid that makes the AC cool, and it might leak or evaporate over time. It could also be that the AC filter is too dirty and blocking the airflow; I remember a noticeable improvement after replacing the filter before. Another issue could be the compressor—if you hear a humming sound when starting but no cool air comes out, that's bad news. If the condenser is dirty or clogged, it can also affect cooling efficiency. I tried checking the filter location, opening it behind the glove compartment, and sure enough, it was covered in a thick layer of black dust. But it's best to take it to a professional auto shop for a proper inspection—don't tinker with it yourself. Safe driving is the priority, especially on long trips. Remember to clean the filter every six months to prevent many issues.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What is the body weight of the Jetour X95?

Jetour X95 is a mid-size SUV under the Jetour brand, with a body weight of 1.85 tons. Introduction to Jetour X95: 1. Body dimensions: The length, width, and height of Jetour X95 are 4875mm, 1925mm, and 1780mm respectively, with a wheelbase of 2855mm. 2. Powertrain: Jetour X95 is equipped with two types of engines, one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter turbocharged engine. 3. Suspension: The front suspension uses MacPherson independent suspension, and the rear suspension uses multi-link independent suspension.
12
0
Share

What brand is Bestall tires?

Bestall tires are the Japanese-produced Falken tires. Introduction to Falken tires: Falken tires were established in 1983 and belong to Sumitomo Rubber Industries, Ltd. From the beginning, they were positioned as a "flagship high-performance radial tire" brand. In 2015, Falken tires officially entered the Chinese market, and in 2016, they unveiled a new brand image globally. Introduction to tires: Tires are round, elastic rubber products mounted on various vehicles or machinery that roll on the ground. They are usually installed on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance.
4
2
Share

Where is the OBD port located on the Jinbei minibus?

Jinbei Haise OBD port is generally located inside the trim panel below the steering wheel, near the driver's knee area. It serves as an interface for connecting external diagnostic equipment, allowing connection to automotive maintenance computers for monitoring vehicle systems and repairing software faults. This port can also be used to connect specialized computers for modifying hidden vehicle functions. Introduction to Jinbei Haise OBD: The OBD device monitors multiple systems and components including the engine, catalytic converter, particulate filter, oxygen sensors, emission control system, fuel system, EGR, etc. The OBD interface typically features a 16-pin female connector with a trapezoidal shape. Some vehicle models have protective covers over the OBD port, with common port colors being black, white, or blue.
7
1
Share

What are the reasons for the automatic transmission warning light to illuminate?

Automatic transmission warning light may illuminate due to the following reasons: Oil leakage: Oil seeping from the transmission housing or oil pan. One reason is aging seals causing poor sealing; another reason is manufacturing defects leading to sand holes in the housing. Engine stalling when shifting: Engine stalls when shifting into D or R gear. This fault may be caused by a damaged lock-up solenoid valve or a stuck lock-up control valve. Gear lock-up: Incorrect input/output signals from the transmission, or malfunctioning components/circuits. Sometimes it can also be caused by communication issues between the transmission computer and other system computers.
4
4
Share

Why does the brake make a creaking sound and fail to stop on snowy roads?

It is normal for the brake to make a creaking sound and fail to stop on snowy roads, as this is the ABS (Anti-lock Braking System) in action. The function of ABS: The Anti-lock Braking System (ABS) prevents the wheels from locking up during braking by automatically controlling the braking force, ensuring the wheels maintain a rolling and sliding state (with a slip ratio of around 20%). This maximizes the traction between the wheels and the road surface. Considerations when purchasing a car: Although ABS can shorten braking distance, different types of ABS systems vary significantly in price due to differences in their components and structure. Therefore, when purchasing a car, one should not only consider the price but also the type of ABS system installed.
3
5
Share

Scrapping Standards for Flood-Damaged Vehicles

When a vehicle cannot meet the national safety technical standards for in-use motor vehicles after repair and adjustment, it must be scrapped. Below is relevant information: Introduction: A flood-damaged vehicle refers to a car that has been submerged in water, typically involving the engine and transmission being soaked, with water levels exceeding the wheels and body seats, and prolonged contact between the vehicle's underbody components and water. Hazards of Flood-Damaged Vehicles: The dangers of water-damaged vehicles are significant. If a motor vehicle is submerged, it can easily lead to rusting of body components, shortening its lifespan and reducing safety performance. For example, water damage can cause corrosion and rusting of the vehicle's wiring, leading to sudden engine stalling or spontaneous combustion due to short circuits while driving, with potentially catastrophic consequences.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.