Why is the car air conditioner not blowing warm air?

What is the fuel consumption of Dewei D30 per 100 kilometers in liters?

Dewei D30 consumes 13 liters per 100 kilometers. The vehicle is practical, efficient, comfortable, and healthy. Practical and Efficient: Equipped with Dewei D30TCIE4 high-end power, 115kW power, maximum torque of 450Nm, using chain drive, compared with belt drive, there is no elastic sliding and slipping phenomenon, more reliable, higher efficiency; matched with Wanliyang 6G55 all-aluminum transmission, input torque up to 550Nm, stronger power, faster start, higher transportation efficiency; rear axle main reduction ratio 4.11/4.33, maximum speed up to 120KMH when unloaded, more load and faster running, higher efficiency. Comfortable and Healthy: The newly upgraded seat improves the hardness of the seat sponge, tough but not hard, adjusts the inclination of the seat cushion, improves the support of the seat cushion and the wrapping of the backrest, giving extra care to the waist, the position of the air brake handle is moved back, saving a lot of space in the front row, making it convenient for drivers and passengers to lie down and rest, making driving more comfortable and healthier.

8

5

Share

Where is the Subaru Forester's engine located?

The engine control unit (ECU) of the Subaru Forester is located inside the glove compartment on the passenger side. This vehicle stands out with its folding power controls and exterior design. Exterior Design: The rear design of this new model is both simple and practical, with a few clean, bold lines outlining the entire rear section. The high-brightness LED taillights provide excellent visibility at night, enhancing safety. Features like the frameless rear wiper, aerodynamic roof spoiler, and chrome-plated exhaust pipe reflect Subaru's traditional sporty character. Power and Handling: The Forester offers two engine options: one is a horizontally opposed 2.0L DOHC 16-valve gasoline engine. Under the control of the 'Variable Valve Timing Electronic Control System,' it not only boosts engine power but also maximizes fuel efficiency. This engine delivers a maximum output of 109Kw/6000rpm and a peak torque of 191N.m/3200rpm. The other option is a horizontally opposed 2.0L DOHC 16-valve turbocharged gasoline engine, which delivers even more impressive power, with a maximum output of 169Kw/5600rpm and a peak torque of 319N.m/2800rpm. Both engines are paired with Subaru's renowned symmetrical all-wheel-drive system.

2

Share

What Causes the Ticking Sound in BMW's Cold Start Engine?

BMW's cold start engine ticking sound is caused by valve clearance and a malfunctioning purge valve. Valve Clearance: After the car has been parked for a day, the engine's lubricating oil has mostly flowed back into the oil pan. During a cold start, the oil pump cannot immediately establish oil pressure or form an oil film between components, especially the valves inside the cylinder head (upper part). Without proper lubrication during a cold start, both hydraulic lifters and mechanical rocker arms will have some valve clearance, resulting in a ticking sound. After the engine runs for a while, oil pressure builds up, an oil film forms, and the oil temperature rises. Once the engine operates normally, the "ticking" sound disappears (Note: If the engine continues to make a ticking noise when hot, have it inspected at a repair shop as soon as possible). Charcoal Canister Purge Valve: Its function is to open the electromagnetic valve between the charcoal canister and the intake manifold after the engine starts. The gasoline vapor adsorbed by the charcoal canister is drawn into the cylinder by the vacuum in the intake manifold to participate in combustion. This not only reduces emissions but also lowers fuel consumption. During operation, a ticking sound may also occur.

19

1

Share

What is the spark plug model for the Jaguar XFL?

The spark plug model for the Jaguar XFL is the ITR6F13 iridium spark plug. Under normal maintenance conditions, it should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Under high voltage, the air between the center electrode and the side electrode of the spark plug will rapidly ionize, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties and forming a discharge channel, resulting in a "breakdown" phenomenon. At this point, the gas forms a luminous body, known as a "spark." Accompanied by thermal expansion, a "crackling" sound also occurs. The temperature of this electric spark can reach as high as 2,000 to 3,000°C, which is sufficient to ignite the air-fuel mixture in the engine's combustion chamber.

13

5

Share

Where to Check the Oil Level in a Corolla?

Corolla can check the oil dipstick. Engine oil has the functions of easy cleaning, sealing and leak prevention, and rust and corrosion prevention. Easy cleaning: Good engine oil can bring carbon deposits, sludge, and worn metal particles on engine parts back to the oil tank through circulation, and wash away the dirt generated on the working surfaces of the parts through the flow of the lubricating oil. Sealing and leak prevention: Engine oil can form a seal between the piston rings and the piston, reducing gas leakage and preventing external pollutants from entering. Rust and corrosion prevention: Lubricating oil can adhere to the surface of parts to prevent contact with water, air, acidic substances, and harmful gases.

13

4

Share

What is the color of the original Baojun antifreeze?

The original Baojun antifreeze is green in color. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance features such as preventing freezing in winter, boiling in summer, and providing year-round protection against scale and corrosion. Composition of antifreeze: The main components of antifreeze are: 50% purified water, 40% methanol, and 10% other substances. Types of antifreeze: Antifreeze is generally categorized into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Can different antifreezes be mixed? It is necessary to use antifreeze from the same brand. Different brands of antifreeze may have varying production formulas, and mixing them could lead to chemical reactions between the additives, rendering them ineffective. How to choose antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. The market offers antifreeze with freezing points of -15℃, -25℃, -30℃, -40℃, etc. Generally, it is advisable to choose an antifreeze with a freezing point at least 10℃ lower than the lowest temperature in your region.

3

Share

Why is the car air conditioner not blowing warm air?

What is the fuel consumption of Dewei D30 per 100 kilometers in liters?

Where is the Subaru Forester's engine located?

What Causes the Ticking Sound in BMW's Cold Start Engine?

What is the spark plug model for the Jaguar XFL?

Where to Check the Oil Level in a Corolla?

What is the color of the original Baojun antifreeze?

What Lights Should Be Turned On When Parking at Night?

What is the spark plug model for Jaguar XFL?

Why does the Baojun DCT (Dual Clutch Transmission) malfunction?

What color is the Baojun antifreeze?