Why is the Camry's daytime running light flickering?

1 Answers
StLola
07/30/25 3:47am
Possible reasons for the flickering of the Camry's daytime running light: it could be due to poor contact between the fuse and the headlight plug, or poor connection between the cathode power supply and the wiring harness with the frame. The daytime running light automatically turns on after the vehicle is started and remains lit in any position of the light switch, with no option for manual shutdown. The purpose of daytime running lights is to make the vehicle more easily recognizable during daytime driving. The Camry has a length of 4885mm, width of 1840mm, height of 1455mm, and a wheelbase of 2825mm. In terms of exterior design, the Camry features a large trapezoidal horizontal grille, a streamlined body posture with a lower waistline, an extended roofline that increases rear headroom, and a dual-sided quad-exhaust design at the rear.
Was this review help?
6
4
Share
More Forum Discussions

What causes the SWM X7 to feel like it's braking when starting?

The reasons why the SWM X7 feels like it's braking when starting are: 1. Improper operation causing the clutch fulcrum to be out of sync; 2. Faults in the brake system or vacuum booster assembly. Taking the 2021 SWM X7 as an example, its body structure is a 5-door, 6-seat SUV with dimensions of: length 4710mm, width 1855mm, height 1773mm, and a wheelbase of 2750mm. The 2021 SWM X7 features a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 220Nm, paired with a 6-speed automatic transmission.
1
0
Share

What are the reasons for the windshield wipers not working?

The reasons for the windshield wipers not working are: 1. Dislocation of the transmission linkage; 2. Fuse damage; 3. Damage to the wiring and turn signal combination switch; 4. Windshield wiper motor damage. The replacement method for windshield wipers is: 1. Lift the wiper upright; 2. Press the clip below to remove the wiper blade; 3. Remove the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and the replacement is complete when you hear a clicking sound. The function of windshield wipers is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. The maintenance methods for windshield wipers are: 1. Use windshield washer fluid to clean the front windshield; 2. Regularly clean or replace the wiper blades; 3. Replace the linkage components.
4
5
Share

What tires should the Arrizo 5 replace?

The best replacement tire model for the Arrizo 5 is: Giti tires with the specification 205/50/R17. Below are specific details about the tires: 1. For the Arrizo 5's tires, it is recommended to rotate them every 10,000 kilometers (the optimal rotation interval is between 5,000-7,000 kilometers). The normal lifespan of the tires is two years or 60,000 kilometers, whichever comes first. 2. Tires provide the best vehicle handling, comfort, and safety for driving. If you need to replace the tire and wheel categories, be sure to consult a Chery authorized service station and follow the relevant instructions before use to avoid safety accidents. Chery Automobile Co., Ltd. will not bear any responsibility for accidents caused by non-original tires or wheels. 3. The age of the tires: do not use tires older than 6 years, regardless of whether they have been used or not. Tires will degrade over time.
6
4
Share

Should Traction Control Always Be On?

It is essential to keep the car's traction control system activated as it is a safety feature. The traction control system prevents the vehicle from losing control during startup and acceleration, especially in slippery or wet conditions. If the traction control system is installed, such incidents can be avoided. Below are the details about traction control: Introduction 1: The Traction Control System (TCS), also known as ASR or TRC, ensures that the vehicle achieves optimal traction under various driving conditions. Introduction 2: The control unit of the traction control system is a computer that monitors the speed of all four wheels and the steering wheel angle. If excessive speed differences between the drive wheels and non-drive wheels are detected during acceleration, the computer immediately identifies excessive driving force and sends a signal to reduce the engine's fuel supply, thereby decreasing the driving force and minimizing wheel slip. Introduction 3: The computer uses the steering wheel angle sensor to determine the driver's intended steering direction. By comparing the speed difference between the left and right wheels, it assesses whether the vehicle's turning behavior matches the driver's intention. If understeer is detected, the computer reduces the driving force on the drive wheels to align with the driver's steering input.
13
1
Share

What are the types of Mobil engine oil?

Mobil engine oils are categorized into Mobil Super, Mobil 1, and Mobil Delvac. The functions and precautions of engine oil are as follows: Functions of engine oil: Separate the surfaces of relatively sliding parts to reduce wear. Bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine. Circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, and flush away dirt generated on the working surfaces of parts through the flow of lubricating oil. Precautions for changing engine oil in cars: Drain the oil when it is hot, as the oil flows better; Fill to the level indicated by the dipstick; Choose oil products based on driving environment, driving frequency, and the requirements of the vehicle's engine itself. The type of engine oil varies depending on different situations: Engines differ, so engine oils can be divided into diesel engine oil and gasoline engine oil; Quality and performance differ, so engine oils can be divided into full synthetic oil, semi-synthetic oil, and mineral oil.
10
4
Share

How to turn on the lights of Jeep Compass?

The headlight switch of Jeep Compass is located at the lower left side of the steering wheel. Turn it forward twice to turn on the headlights, push forward for high beams, and pull back to switch to low beams. Below are the specific details of Jeep Compass: 1. Jeep Compass retains some JEEP family characteristics. The front face features a 7-slot grille similar to the design of the imported luxury SUV Grand Cherokee, giving it a more urban and dynamic appearance. 2. The new family-style three-spoke sports multifunction steering wheel integrates controls for audio, cruise, and other functions, allowing the driver to easily operate them without taking hands off the wheel. In addition, the front seats are equipped with high-grade genuine leather bucket seats, and the newly designed backlit door switches, door locks, and windows enhance comfort and convenience in all aspects. 3. The vehicle is equipped with a touch-screen GPS navigation system integrating rearview camera and Bluetooth functions, as well as a premium audio system with 9 Boston-Acoustic brand speakers.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.