Why is the Buick Verano being recalled?

1 Answers
DiKeegan
07/29/25 11:14pm
Buick Verano is being recalled due to the following reason: The front suspension equipped on the vehicle may deform or disengage when subjected to significant external force impact, which could potentially lead to loss of vehicle control under extreme circumstances, posing a safety hazard. Additional information about automotive recalls is as follows: 1. An automotive recall refers to the process where the manufacturer of defective automotive products eliminates the defects in their products in accordance with legal requirements and procedures. This includes the manufacturer effectively notifying relevant parties such as dealers, repairers, and vehicle owners about the specifics of the defects and the methods to eliminate them. The manufacturer then organizes dealers, repairers, etc., to eliminate the defects in their automotive products through specific measures such as repairs, replacements, or returns. 2. Automotive recalls have become a mature mechanism for addressing defects in automotive products, making significant contributions to safeguarding public safety, property security, and the healthy development of the automotive industry in various countries.
Was this review help?
9
5
Share
More Forum Discussions

How to Handle an Accident Involving a Non-Operational Vehicle Used for Passenger Transport?

The responsible person shall be sentenced to fixed-term imprisonment of not more than three years or criminal detention; if the circumstances are especially serious, the sentence shall be fixed-term imprisonment of not less than three years but not more than seven years. Can criminals engaged in illegal transportation be placed under residential surveillance? Residential surveillance, to a certain extent, restricts the personal freedom of the criminal offender.
11
1
Share

Where is it prohibited to make a U-turn in a car?

Prohibited U-turn situations are as follows: U-turns are prohibited where there are 'No U-turn' signs or 'No Left Turn' signs: If there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. A U-turn is essentially an extension of a left turn, so if there is a 'No Left Turn' sign at an intersection, U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. If U-turns are permitted at an intersection, you must cross the crosswalk before making the U-turn; you cannot make the U-turn on the crosswalk itself. U-turns are prohibited when there is no left-turn lane: Even if you are in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited in the second left-turn lane: When a vehicle is in the second left-turn lane, it cannot make a U-turn. In the absence of any directional signs, U-turns are only permitted in the innermost left-turn lane. U-turns are prohibited at solid yellow lines: U-turns are not allowed at solid yellow lines. Even if there is a sign permitting U-turns, you must wait for the green light and cross the stop line before making the U-turn. U-turns are prohibited on highways: Making a U-turn by crossing the central divider on a highway is illegal and will result in a fine and 12 demerit points. If you miss an exit on the highway, continue driving to the next exit and leave the highway. Never attempt an illegal U-turn out of recklessness.
6
5
Share

What is the complete process for replacing the eccentric shaft sensor on a BMW?

Disconnect the connector, remove the ignition coil cover, and use appropriate tools to lift the seal. Remove the eccentric shaft sensor seal. Slightly lubricate the sealing surface with engine oil, press in the seal using special tool 116420, and then connect the connector.
18
5
Share

What Are the Consequences of Driving with a Coolant Leak?

The consequences of driving with a coolant leak are as follows: poor engine cooling, which can severely cause cylinder scuffing, affecting the vehicle's lifespan and driving safety. Coolant replacement method: Drain the old coolant, then flush the fluid channels with clean water. Add clean water to the coolant reservoir, then continuously pour water into the reservoir to allow it to flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will have a faint pink color. Continue adding clean water until the outflowing water is clear. Note: Remember to disconnect the heater hose to drain the water from the heater core. After about an hour of draining, add the new coolant through the radiator hose, which allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is purged from the system. Top up the coolant to the "MAXT" mark on the reservoir. Function of coolant: Coolant is a special additive-containing fluid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion year-round. The full name of coolant should be antifreeze coolant, meaning it has antifreeze properties. Coolant prevents the liquid in the cooling system from freezing during cold winter stops, which could otherwise cause the radiator to burst or damage the engine block or cylinder head.
1
4
Share

How to Change the Name in BMW Driver Profile?

Find the Vehicle option in the iDrive menu and click on Driver Configuration. Click on Configuration to set up the driver profile. If an error occurs when adding a driver profile, simply add 86 before the phone number.
19
1
Share

Where to Set BMW Mirror Auto-Folding?

Press the left arrow button on the multifunction steering wheel repeatedly to enter the setting mode. Release the button when the setup option appears on the instrument cluster menu. After entering the setup interface by clicking the right steering wheel button, select "Settings", then choose the "Mirrors" tab and enable the "Auto-Folding" option.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.