Why is the Buick 653 so much more expensive than the 652?

What engine is used in the Baojun 730?

Baojun 730 uses two engines in total, one is a 1.5-liter four-cylinder naturally aspirated engine, and the other is a 1.5-liter four-cylinder turbocharged engine. The 1.5-liter naturally aspirated engine has 105 horsepower and a maximum torque of 135 Nm; the 1.5-liter turbocharged engine has 147 horsepower and a maximum torque of 250 Nm. The Baojun 730 is an MPV model under SAIC-GM-Wuling Baojun, with a body length, width, and height of 4780mm, 1820mm, and 1755mm respectively, and a wheelbase of 2750mm. In terms of appearance, the rear styling of the Baojun 730 has also been significantly adjusted, with reduced chrome strips and an increased tailgate size, occupying the entire horizontal width of the rear; the taillights have been changed from the original split design to an integrated design, with sharp styling and a horizontal LED light strip that is fashionable and eye-catching, giving a sense of technology.

10

4

Share

What is the transmission of the Hyundai ix35?

The transmission brand used in the Hyundai ix35 is Powertech. Hyundai Powertech is a subsidiary of the Hyundai Group in South Korea, specializing in the production of transmissions. Currently, most Hyundai and Kia models on the market use transmissions produced by Hyundai Powertech. The Hyundai ix35 is equipped with a 6-speed automatic transmission and a 7-speed dry dual-clutch transmission. The Dual Clutch Transmission (DCT) differs from conventional automatic transmission systems. It is based on a manual transmission but functions as an automatic transmission, offering the flexibility of a manual transmission and the comfort of an automatic transmission, while also providing uninterrupted power output. When using the transmission of the Hyundai ix35 in daily driving, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into the opposite gear before the vehicle has fully stopped, which can cause significant damage to the transmission gears and may lead to gear grinding or other failures over time. Avoid frequently climbing steep slopes in Drive (D). When facing steep inclines, automatic transmission vehicles may overheat due to high load or may upshift too early, resulting in insufficient power. In such cases, it is advisable to use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Towing the vehicle with a rope or directly dragging it should be avoided.

16

5

Share

Can a C1 driver's license drive a light van?

C1 driver's license can drive most light vans, the specific reasons are as follows: 1. According to the No. 123 Order of the Ministry of Public Security, holders of a C1 driver's license can drive small and micro passenger cars, light and micro trucks, as well as light and micro special-purpose vehicles. 2. Generally, the model range of light vans is within 2 tons, with a length not exceeding 6 meters, which falls within the vehicle range that a C1 driver's license can drive. In addition, vehicles with a total weight not exceeding 4.5 tons, seating capacity (including the driver) not exceeding 9 people, or vehicles with a length below 6 meters are all considered small cars. 3. Different regions may have specific regulations regarding vehicle operation requirements. Whether you can drive a particular vehicle should also depend on the relevant requirements in your area. It is best to consult the traffic management department before using the vehicle to clarify the model, tonnage, length, and other related issues of vehicles that a C1 driver's license can drive. Only after confirming should you proceed to use the vehicle, otherwise, if discovered, you will need to bear the corresponding responsibilities.

4

Share

Where is the original production location of Lynk & Co?

Lynk & Co 01 is originally produced in Taizhou, while Lynk & Co 02 and Lynk & Co 03 are produced in Zhangjiakou. Below are the relevant details: 1. Lynk & Co is a premium brand jointly established by Geely Holding, Geely Auto, and Volvo Cars in the new era. It is built on the CMA (Compact Modular Architecture) mid-size car platform, co-developed by Volvo Cars and Geely Auto, with Volvo Cars taking the lead. The brand was officially launched in Berlin on October 20, 2016, along with its first production model, the Lynk & Co 01. 2. In terms of exterior design, the Lynk & Co 01 features highly distinctive independent styling. The front grille, which spans the width of the car, raises the visual center of gravity, giving the vehicle a minimalist and fashionable appearance. 3. The interior of the Lynk & Co 01 adopts an asymmetrical design, with the center console tilted towards the driver's side for easier access to the touchscreen. The overall design is very unique and stylish. 4. Under the hood, the Lynk & Co 01 is powered by a 2.0T engine, delivering a maximum power of 190 horsepower and a peak torque of 300 N•m. It can accelerate from 0-100 km/h in just 7.7 seconds. The fuel consumption for the front-wheel-drive model is 6.5L/100km, while the all-wheel-drive model consumes 6.9L/100km. The 0-100 km/h acceleration times are 7.7s and 7.9s, respectively. The price ranges from 158,800 to 220,800 yuan.

3

0

Share

What are the body dimensions of the Dongfeng Nissan Kicks?

The Dongfeng Nissan Kicks has a length, width, and height of 4312mm/1760mm/1613mm, which are official data. The length of the Dongfeng Nissan Kicks refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The naturally aspirated engine of the Dongfeng Nissan Kicks has a maximum power of 90kW and a maximum torque of 143 Nm. This engine reaches its maximum power at 6300 rpm and its maximum torque at 4400 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission (CVT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, according to national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

14

2

Share

How Often Should a Driver's License Be Inspected?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the inspection intervals for different types of driver's licenses vary. Class C driver's licenses do not require annual inspections; they only need to be inspected when the license expires and needs renewal. Class A and B driver's licenses require annual inspections, but if there are no demerit points recorded within a scoring cycle, the inspection for that cycle can be waived. Class A and B driver's licenses must undergo an annual inspection within thirty days after the end of the scoring cycle at the traffic management department of the public security authorities. However, if there are no demerit points for violating traffic safety laws and regulations within a scoring cycle, the inspection for that cycle can be waived. If the inspection is not completed on time, it can be made up within three years. If an A or B class license is not inspected for over three years, it will be downgraded, with the maximum downgrade being to a C1 class license. Class E, D, E, and F driver's licenses do not require annual inspections. They only need to be renewed within three months before the expiration date. If the renewal is not processed after expiration, it can still be done normally within one year. If it exceeds one year, the holder must pass the theoretical test (Subject 1) to renew. However, if the license remains unrenewed for over three years, it will become invalid and can no longer be used.

19

4

Share

Why is the Buick 653 so much more expensive than the 652?

What engine is used in the Baojun 730?

What is the transmission of the Hyundai ix35?

Can a C1 driver's license drive a light van?

Where is the original production location of Lynk & Co?

What are the body dimensions of the Dongfeng Nissan Kicks?

How Often Should a Driver's License Be Inspected?

What are Honda hybrid vehicles?

What is the ground clearance of the Orlando?

Which BMW 1 Series model has a four-cylinder engine?

What are the symptoms of carbon buildup in a car?