Why is the Bora's washer motor not spraying water?

What is the ground clearance of the Cruze?

The ground clearance of the Cruze is 130 millimeters. The minimum ground clearance of the Cruze refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Cruze, the better its passability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Chevrolet Cruze is a next-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources. The Cruze has a length of 4666mm, a width of 1807mm, a height of 1460mm, and a wheelbase of 2700mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the Cruze is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Cruze's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage.

17

4

Share

What is the difference between 0w30 and 5w30 engine oil?

The differences between 0w30 and 5w30 engine oils are as follows: 0w30 oil has better low-temperature fluidity, and using 0w30 oil can reduce engine noise during cold starts. Relevant information about engine oil grades is provided below: 1. The letter 'w' in the oil grade stands for 'winter,' indicating that the oil is suitable for winter use. If an oil grade contains the letter 'w,' it means the oil can be used normally in winter. 2. The number before 'w' represents the oil's low-temperature fluidity. 0w indicates the oil can flow normally at -35 degrees Celsius, while 5w means the oil can flow normally at -30 degrees Celsius. The number after 'w' represents the oil's viscosity—the higher the number, the greater the viscosity.

6

4

Share

What is the content of Driving License Subject 1?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly stipulate the content of Subject 1 examination: road traffic safety laws, regulations, and rules; traffic signals and their meanings; knowledge of safe driving and civilized driving; safe driving knowledge under conditions such as highways, mountainous roads, bridges, tunnels, nighttime, adverse weather, and complex road conditions; emergency handling knowledge in situations like tire blowouts, steering failure, and brake failure; general structure of motor vehicles, common knowledge of main safety devices, basic knowledge of daily inspection and maintenance; basic knowledge of self-rescue and first aid after traffic accidents, as well as common hazardous materials. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the paper and end the exam. Subject 1, also known as the theoretical test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. Notes for Subject 1 examination: Students should pay attention to their attire during the exam; no slippers are allowed, and electronic devices and bags are prohibited in the examination hall. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination hall. Upon entering, verify your identity at the assigned seat and start the exam. Ensure the camera is aligned with you and adhere to exam discipline. If you fail the first time, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it; unsigned reports are considered invalid. There is no limit to the number of times you can reschedule Subject 1. Each subject can be taken once, and if you fail, you can retake it once. If you do not take the retake or fail the retake, the exam is terminated, and the applicant must reschedule. For Subject 2 and Subject 3, there are only five exam attempts, and the rescheduling must be done at least ten days later. If you fail the Subject 3 safe and civilized driving knowledge test, the previously passed road driving skills test scores remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, there is no official term "Subject 4" in the actual regulations (i.e., the Ministry of Public Security Order No. 123).

12

0

Share

Baojun 560 Shows Electronic Lock Malfunction?

Baojun 560 shows electronic lock malfunction reasons: 1. It may be a battery issue, such as battery depletion or the battery reaching its lifespan limit. Solution: Replace the battery. 2. It could be a sporadic malfunction. Solution: Try locking and unlocking the car again to see if it works normally; if it does, then there's no issue. 3. The entire vehicle's locking system is locked. Solution: In this case, only a 4S store can unlock it. Relevant information is as follows: The Baojun 560 is a compact MPV with body dimensions of 4597mm in length, 1736mm in width, and 1462mm in height, with a wheelbase of 2640mm. In terms of power, the 1.5T inline 4-cylinder turbocharged engine equipped in this car has a maximum power of 110 kW and a maximum torque of 230 Nm; the 1.8L inline 4-cylinder naturally aspirated engine equipped has a maximum power of 101 kW and a maximum torque of 186 Nm.

7

4

Share

How Many Liters of Engine Oil Does a Focus 1.8 Require?

The Focus 1.8 requires approximately 4.5L of engine oil. After adding the oil, you can check the oil dipstick scale for the exact level. Since this engine is turbocharged, it necessitates the use of fully synthetic oil. Turbochargers operate under high temperatures and high rotational speeds, demanding superior lubrication from the oil. Relevant information is as follows: The Focus 1.8 is a compact car with body dimensions of 4480mm in length, 1840mm in width, and 1500mm in height, and a wheelbase of 2640mm. It is equipped with either a 1.5L EcoBoost or a 1.5L TiVCT engine, paired with a 5-speed manual transmission. All models meet the China VI emission standards.

7

5

Share

Should the Camshaft Pulley of the 474 Engine Align with E or i?

The camshaft pulley of the 474 engine aligns with E. Below is relevant information about the camshaft of the 474 engine: 1. There are two grooves inside the pulley, which fit onto a small protruding tab on the camshaft. 2. In factory settings, the E point on the inner diameter of the camshaft pulley is locked onto the camshaft. Here is an introduction to the function of the engine: 1. An engine is a machine capable of converting one form of energy into another. 2. Typically, it converts chemical energy into mechanical energy. Below is an introduction to the components of an engine: An engine consists of the crankshaft connecting rod mechanism, valve train, fuel supply system, cooling system, lubrication system, ignition system, and starting system. 2. Engines are categorized into piston engines, ramjet engines, rocket engines, and turbine engines.

2

4

Share

Why is the Bora's washer motor not spraying water?

What is the ground clearance of the Cruze?

What is the difference between 0w30 and 5w30 engine oil?

What is the content of Driving License Subject 1?

Baojun 560 Shows Electronic Lock Malfunction?

How Many Liters of Engine Oil Does a Focus 1.8 Require?

Should the Camshaft Pulley of the 474 Engine Align with E or i?

Can a New Car Be Driven on the Highway During the Break-in Period?

What is a Car Body Kit?

When is the first maintenance for the Bora?

How often does a car need maintenance?