Why is the Bora Legend cheaper than the Bora?

What Causes Engine Oil Burning in Cars?

Engine oil burning is related to the HTHS (High Temperature High Shear) of the oil. You can try using oil with a higher HTHS value, which refers to the high-temperature high-shear viscosity. Vehicles such as turbocharged engines, large-displacement sedans, or SUVs should use high-performance full synthetic oil with an HTHS greater than 3.5 and a high viscosity index. Currently, many car models experience engine oil burning, which occurs when oil enters the engine's combustion chamber and mixes with the air-fuel mixture for combustion. Oil burning can lead to rapid damage of the oxygen sensor, increased carbon deposits in the combustion chamber, unstable idling, poor acceleration, increased fuel consumption, and excessive exhaust emissions. In severe cases, insufficient engine lubrication can cause irreparable damage or even engine failure, significantly increasing repair costs and posing potential safety hazards.

14

2

Share

Can ETC be used without inserting the card?

ETC cannot be used without inserting the card. According to the "Rules for the Use of Non-Stop Fast Pass System," the ETC card must be inserted into the OBU device for normal operation; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When the ETC card is inserted into the OBU device, a prompt sound will be heard, indicating that the device is activated. Without the card inserted, the device remains in a dormant state and cannot recognize vehicle information at toll stations, so ETC cannot be used without the card. ETC is an electronic toll collection system, also known as an automatic road toll system. It is a specialized road toll method typically used on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC deduction principle: Highways have one or more ETC lanes. Through microwave short-range communication between the vehicle's onboard electronic tag (installed on the windshield) and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to settle payments with banks. This allows vehicles to pass through toll stations without stopping, based on the principle of "pass first, deduct later." Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass toll stations without stopping; Cost-saving: Reduces wear and fuel consumption by minimizing frequent starts and stops; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation cards will be widely used in key urban clusters, and the proportion of vehicles equipped with ETC will significantly increase." The plan also set a target of "achieving a 50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to improving the convenience of ETC installation and usage rates for passenger vehicles, efforts will be made to promote ETC use for trucks and explore deeper integration of ETC systems with smart transportation developments like vehicle-to-vehicle communication and vehicle-to-infrastructure coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC.

2

Share

Why Can't an Automatic Transmission Car Shift Gears?

Automatic transmission cars cannot shift gears because the gear is locked. This issue occurs when the vehicle is not completely stopped before shifting into the P (Park) position, causing the transmission gear to brake. In extremely low temperatures, the transmission fluid may not be fully lubricated, leading to the inability to shift gears. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Automatic transmission cars typically have six gear positions, listed from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). For general driving needs, using only the P (Park), R (Reverse), N (Neutral), and D (Drive) gears is sufficient.

18

3

Share

What is the reason for Skoda displaying low battery voltage?

Skoda displays low battery voltage because: the battery voltage has fallen below the controller's operating conditions, indicating a need for recharging. Introduction to Automotive Batteries: Automotive batteries are an indispensable part of a vehicle. The types of batteries used in cars include traditional lead-acid batteries and maintenance-free batteries. These batteries use lead-calcium alloy grids, which result in less water decomposition and evaporation during charging. The sealed structure of the battery case also minimizes the release of sulfuric acid gas. Precautions for Battery Use: Reduce electrical usage when the engine is off; regularly clean and replace the battery; the vehicle should be used periodically. Even during traffic restrictions or periods of non-use, the car should not be left unused for extended periods, as this can gradually deplete the battery's charge.

20

0

Share

Where is the Santa Fe trunk switch located?

The Santa Fe trunk switch is located on the door next to the driver's seat or on the key fob. Opening via the driver's side button: Use the trunk button inside the vehicle. On the left front door, which is the driver's side, you can find a trunk release button on the door panel. Simply lift the button upward to open the trunk lid. Opening via the trunk button: Use the button on the trunk lid. Below the trunk lid, near the edge between the left and right license plate lights, there is a button to open the trunk. Press the button upward to release the trunk lid. Opening via the key fob: Use the key fob to open the trunk. The key fob has three buttons, with the middle button being the trunk release. Press and hold the middle button for about 3 seconds, and the trunk lid will open automatically.

13

4

Share

What is the reason why the Haval H6 Coupe cannot detect the key?

The reason why the Haval H6 Coupe cannot detect the key is due to reasons such as the key battery being dead. Below are the relevant details: Key battery dead: If the keyless entry system displays "Key not detected," you can place the chip key close to the keyless button and then start the ignition. Note that when the vehicle control panel displays "Key not detected," it is likely that the key battery is dead. You need to promptly replace it with a new large button battery, after which it can be used normally. Key placed in the wrong position: Please check if the smart key is placed on the dashboard, floor, combination meter, storage compartment, or luggage compartment. The above situations may prevent switching the ignition switch mode. If necessary, you can try replacing the key battery.

10

3

Share

Why is the Bora Legend cheaper than the Bora?

What Causes Engine Oil Burning in Cars?

Can ETC be used without inserting the card?

Why Can't an Automatic Transmission Car Shift Gears?

What is the reason for Skoda displaying low battery voltage?

Where is the Santa Fe trunk switch located?

What is the reason why the Haval H6 Coupe cannot detect the key?

What is the fuel tank capacity of the Tacqua?

How to Release the Anti-Theft Lock on Cruze?

Do I need to turn on the AC when using the air conditioner in summer?

Does the Dash Cam Record Automatically?