Why is the BMW air conditioning not cooling?

What is the difference between BMW 525i and 525li?

The differences between BMW 525i and 525li are: 1. Different rear tire specifications: The rear tire specification of BMW 525i is 275/40r18; the rear tire specification of BMW 525li is 245/45r18. 2. Different wheelbase: The wheelbase of BMW 525i is 2975mm; the wheelbase of BMW 525li is 3105mm. 3. Different body dimensions: The body dimensions of BMW 525i are length 4976mm, width 1868mm, height 1489mm; the body dimensions of BMW 525li are length 5106mm, width 1868mm, height 1500mm.

18

3

Share

How to Remove BMW Rearview Mirror?

The method for removing a BMW rearview mirror is as follows: 1. Open the inner door panel and remove the trim; 2. Remove the three screws securing the rearview mirror; 3. Unplug the rearview mirror wiring connector to detach the mirror. Taking the BMW X3 20i as an example, it is a mid-size 4-door 5-seater sedan with body dimensions of: length 4719mm, width 1827mm, height 1459mm, and a wheelbase of 2851mm. The fuel tank capacity is 59 liters. The BMW X3 20i is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 115 kW. It features rear-wheel drive, with a front suspension using a double-joint spring strut front axle and a rear suspension utilizing a multi-link independent suspension.

3

5

Share

Where to Add Water to the Windshield Wiper?

Water for the windshield wiper is added at the designated wiper fluid inlet in the engine compartment. The method to add water to the wiper is as follows: 1. Pull the hood release lever to open the front hood; 2. Open the washer fluid reservoir cap; 3. While filling, observe the dipstick inside the reservoir and fill up to the marked line. Precautions for using the car windshield wiper include: 1. Replace or clean the wiper blades promptly when they are severely worn or dirty; 2. When checking the wiper's operation, first wet the windshield with water; 3. After turning off the wiper switch, the wiper blades should return to the lower side of the windshield and stop.

15

4

Share

What Happens If You Drive Without Engaging the Handbrake?

Driving without engaging the handbrake can cause wear and tear on the brake pads. The functions of the handbrake are: 1. When parking, engaging the handbrake keeps the car stationary and prevents it from rolling downhill; 2. During turns, pulling the handbrake can create a drifting effect; 3. In emergencies, the handbrake can serve as a brake. The handbrake, also known as an auxiliary brake, is a crucial component of the vehicle's braking system. Proper use of the handbrake effectively prevents rolling and reduces the risks associated with it when parked. The consequences of driving without releasing the handbrake include: 1. Accelerated wear of the brake disc; 2. Hardening of the brake pads due to overheating; 3. Stretching of the handbrake cable leading to reduced braking performance; 4. Smoke emerging from the rear of the car; 5. Seizing of the brake caliper; 6. Brake fluid leakage; 7. Overheating of the brake fluid; 8. Complete loss of braking function.

17

5

Share

How to Solve the Problem of Water Vapor in Hyundai Elantra Headlights?

The solutions for water vapor in Hyundai Elantra headlights are: 1. Remove the dust cover of the headlight to allow the water vapor inside to dissipate quickly; 2. Turn on the headlights, and the heat generated by the lights will disperse the fog; 3. Use an air gun to blow into the headlight to circulate the air inside and accelerate dehumidification. Taking the 2020 Hyundai Elantra as an example, its body dimensions are: length 4610 mm, width 1800 mm, height 1450 mm, with a wheelbase of 2700 mm. The 2020 Hyundai Elantra is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 115 hp, a maximum power speed of 6300 rpm, and a maximum torque speed of 4500 rpm. It uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear.

1

Share

What is the detection method for the throttle position sensor?

The detection method for the throttle position sensor is as follows: 1. Unplug the connector from the throttle position sensor and turn on the ignition switch; 2. Measure the voltage between VCC and the idle contact, and between VCC and the fully open throttle contact. The voltage should be between 4.5V and 5.5V; 3. If the voltage does not meet the requirements, check the ECU connection circuit. If the voltage is correct, check the throttle potentiometer resistance; 4. Unplug the throttle potentiometer connector and measure the resistance between VCC and the idle contact. It should be between 1.5kΩ and 2.6kΩ; 5. Measure the resistance between VCC and VTH. At idle, it should be between 0.75kΩ and 1.3kΩ.

7

2

Share

Why is the BMW air conditioning not cooling?

What is the difference between BMW 525i and 525li?

How to Remove BMW Rearview Mirror?

Where to Add Water to the Windshield Wiper?

What Happens If You Drive Without Engaging the Handbrake?

How to Solve the Problem of Water Vapor in Hyundai Elantra Headlights?

What is the detection method for the throttle position sensor?

How to Use Auto Start-Stop in Manual Transmission Cars?

Can I use S gear on the highway?

What does the red exclamation mark on the car mean?

What does mute mean?