Why is the Besturn X80 wiper not spraying water?
2 Answers
Besturn X80 wiper not spraying water is caused by the blockage of the filter screen on the motor by scale or decomposition products. Usage of the wiper: By pushing the control lever up and down, you can control the wiper's wiping state (intermittent, off, auto, and high/low speed). If in the auto-adjustment state, you can change the sensitivity of the rain sensor-controlled wiper by rotating the adjustment knob, thereby adjusting the wiper's wiping frequency. As for the front windshield washing, simply pull the control lever lightly toward the driver, and the windshield washer and wiper will work simultaneously. Precautions for using the wiper: If you find that the windshield washer fluid is not spraying out and only the wiper is working, do not continue to press the button. At this time, you should check whether the windshield washer fluid warning light is on. If it is, you should replenish the windshield washer fluid in time.
My Besturn X80 also had the issue of not spraying water before, which really frustrated me. Later, I found out it mainly comes down to a few areas: First, check if there’s enough windshield washer fluid—that’s the most basic. Then, listen for a humming sound from the front when you press the spray button. If there’s no sound, it’s likely the motor is broken or a fuse has blown. If there’s sound but no water, I suggest checking if the nozzles are clogged—use a needle to gently poke the small holes. If the hose is cracked or chewed by rodents, it could also leak. Pop the hood and trace the hose to check. In winter, using plain water can easily freeze, so remember to add antifreeze washer fluid. Also, many cars have a filter in the washer reservoir—if it’s clogged with debris, it won’t pump water. If you can’t fix it yourself, it’s best to take it to a repair shop and let the mechanic check the electrical and water systems.
