Why is the battery icon on the car dashboard flashing?

1 Answers
DiDante
07/30/25 5:18am
If the battery icon on the car dashboard is flashing, it could indicate that the car battery is low on power. A depleted battery may cause the dashboard to flicker when starting the engine, and it should be charged promptly. It is recommended to check whether the battery terminals are securely connected or if there are any issues with other wiring in the car. The functions of the car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the car's electrical devices when the engine is off or idling at low speed; 3. Assisting in powering electrical devices when the alternator's output is insufficient; 4. Absorbing voltage spikes in the electrical system to protect the car's electronic equipment; 5. Storing excess electricity generated by the alternator.
Was this review help?
15
0
Share
More Forum Discussions

What is the maintenance interval for the Kymco CT250?

The maintenance required for the Kymco CT250 at 3,000 kilometers typically involves changing the engine oil and oil filter. If you have the maintenance manual, it is recommended to follow the requirements specified in the manual. Below is an introduction to the Kymco CT250: Fuel Consumption: This motorcycle has a fuel consumption of 3.5 liters per 100 kilometers. The fuel consumption of a motorcycle is not only related to the motorcycle itself but also heavily influenced by the rider's driving habits and road conditions. When driving in congested traffic, the motorcycle's engine spends some time in idle mode. During idle mode, the motorcycle's mileage does not increase, but the engine continues to consume fuel, which can lead to higher fuel consumption per 100 kilometers. Maintenance: It is essential to perform regular maintenance when using the motorcycle. Only by adhering to the maintenance schedule can you ensure the motorcycle remains in good condition, which significantly helps improve fuel efficiency. During maintenance, always use genuine parts and fluids, and make sure to visit a professional service center.
17
5
Share

What are the reasons for the Mercedes-Benz engine warning light to come on?

When the engine is idling, the fuel injection time extends beyond 4.5%, and this condition is detected continuously for more than 10 minutes, along with two consecutive faulty driving cycles, the engine malfunction indicator light will be triggered to illuminate. Here is additional information: Engine malfunctions: Sensor issues, spark plug failure, ignition coil failure, fuel pump failure, charcoal canister failure, catalytic converter failure, fuel line blockage, etc., can all lead to poor combustion of the air-fuel mixture in the engine, causing the malfunction. Prompt inspection recommended: The appearance of a fault code simply suggests a prompt inspection is needed, and the vehicle can continue to be driven. The fault code itself does not directly indicate whether the issue is related to fuel or carbon buildup; rather, it reflects the difference between the engine's normal operating parameters and its actual operating conditions. If this difference exceeds the specified value, the engine light will illuminate.
20
5
Share

What is the actual fuel consumption per 100 kilometers for the Sylphy?

The official comprehensive fuel consumption of the Sylphy is 5.6-6.3L/100km, but the actual fuel consumption may vary depending on the driver's habits, road conditions, weather, and temperature. After a facelift, the Sylphy's front design has become somewhat similar to its bigger sibling, the Teana, featuring a U-shaped chrome trim and boomerang-style headlights, which are part of Nissan's latest design language. The overall style is one that appeals to a wide range of audiences. Here are some fuel-saving tips: Maintain a steady speed: Control your speed while driving and avoid sudden braking. Avoid opening windows at high speeds: Opening windows at high speeds increases fuel consumption. Regularly check tire pressure: Ensure your tires are properly inflated, as both underinflation and overinflation can increase fuel consumption. Pay attention to transmission maintenance: Always use the correct transmission fluid for your vehicle. Transmission fluid not only lubricates but also helps transmit torque, so it should be replaced regularly.
6
4
Share

Is the Toyota Aygo available for sale in China?

Toyota Aygo is not available for sale in China. The compact car Aygo was jointly developed by Toyota and French PSA Peugeot Citroën, with dimensions of 3405mm in length, 1615mm in width, and 1465mm in height, and a wheelbase of 2340mm. Here is more information: The front of the Toyota Aygo appears sharp, with the protruding tail light side section connected to the rear door handle, along with a robust rear design, all highlighting the characteristics of the Toyota Aygo. The buttons on the Toyota Aygo's center console are neatly arranged, available in black, red, silver, and white colors. The wheels are designed close to the four corners, providing a relatively reasonable space. The Toyota Aygo is available in three-door and five-door models, equipped with a 1.0-liter three-cylinder VVTi gasoline engine and a 1.4-liter HDi diesel engine in terms of powertrain configuration.
5
2
Share

What does Toyota's 10-speed CVT transmission mean?

Toyota's 10-speed CVT transmission is essentially a combination of what is referred to as an ECVT transmission and a 4AT transmission, forming ten gear ratios. The ECVT is quite similar to an AT transmission; rather than being just a transmission, it is more accurately described as a highly complex drivetrain system, typically used in Toyota's hybrid models. Below is an introduction to transmissions: Introduction: A transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine and can fix or change the gear ratio between the output and input shafts. Functions: Transmissions can be categorized into stepped, continuously variable, and integrated types, with capabilities such as enabling reverse driving, interrupting power transmission, and changing gear ratios. Principle: Manual transmissions primarily consist of gears and shafts, achieving speed and torque changes through different gear combinations; whereas automatic transmissions (AT) are composed of a torque converter, planetary gears, and a hydraulic control system, achieving speed and torque changes through hydraulic power transmission and gear combinations.
14
5
Share

What does it mean when the BMW 3 Series displays a drivetrain malfunction?

Drivetrain malfunction refers to issues with components such as the clutch, transmission, universal joint, final drive, differential, and axle shafts. However, in reality, besides faults in these components being classified as drivetrain malfunctions, many unrelated situations—such as problems with the fuel pump, fuel injector, solenoid valve, sensors, or even a damaged screw—can trigger a drivetrain malfunction warning. Below is additional information: Composition of the drivetrain system: The components and layout of the drivetrain system vary depending on the type of engine, its installation position, and the intended use of the vehicle. For example, off-road vehicles often use four-wheel drive, which adds components like a transfer case to the drivetrain. In contrast, front-wheel-drive vehicles do not have components like a driveshaft in their drivetrain system. Precautions: Ensure that all components operate smoothly, flexibly, and normally without impacts, vibrations, or unusual noises, and that the oil temperature rise does not exceed 40°C. Conduct an annual inspection after winter use, applying grease to major components for storage.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.