Why is the air conditioning in the Baojun E200 not cooling?

1 Answers
LaLorenzo
07/29/25 5:06pm
Here are the reasons why the air conditioning in the Baojun E200 is not cooling: 1. Internal damage: Severe internal wear of the compressor leads to its inability to function properly. 2. Oil stains: The presence of oil stains at the connections or seams indicates refrigerant leakage, requiring reinforcement or replacement of the relevant parts. 3. Circuit system failure: It is also very common for the car's air conditioning compressor to malfunction due to circuit system failures. You can check if the circuit is functioning properly, inspect the temperature sensor solenoid valve, and other potential causes of failure. Below is additional information about the Baojun 730: 1. Body dimensions: A 5-door, 7-seater MPV under SAIC-GM-Wuling, with length, width, and height of 4780mm, 1780mm, and 1740mm respectively, and a wheelbase of 2750mm. 2. Transmission: Equipped with a 6-speed manual transmission, achieving a top speed of 150 km/h.
Was this review help?
4
1
Share
More Forum Discussions

What are the benefits of applying a paint protection film?

The main benefits of applying a paint protection film are: 1. It can greatly protect the car from daily scratches, stone chips, and damage caused by acidic or alkaline substances. 2. The paint protection film has excellent toughness, wear resistance, anti-yellowing properties, easy adhesion, and impact resistance. After application, it isolates the car's paint from the air, protecting against acid rain, oxidation, and scratches, providing long-lasting protection for the car's paint. 3. The paint protection film has superior stretchability and tensile strength, allowing it to be applied on any curved surface. It also offers excellent UV resistance, preventing long-term damage to the paint and maintaining the original gloss of the factory paint. Additional notes: After applying the paint protection film, avoid driving on highways for the first three to four days, as the film may not have fully adhered and could peel at the edges. Also, be cautious when washing the car during the first few days—avoid using high-pressure water jets, as they may cause the film to lift.
14
0
Share

How to Maintain a 30cm Distance from the Right Side During Parallel Parking?

Align the right 15cm point at the center of the car hood with the right boundary line to ensure a 30cm distance. Approximately one-third of the right side of the car's front should align with the roadside line before stopping. Observe the approximate distance in the rearview mirror and the boundary line; this can generally be judged through the rearview mirror. Turn the steering wheel 90 degrees to the right to approach the roadside. When the center point of the car hood aligns with the boundary line in your line of sight, turn the steering wheel 180 degrees to the left and adjust forward slightly based on individual height. Keep the point 15cm to the right of the car's center pressed against the right white line as you move. This is because the center point of the car represents the trajectory of the right wheel.
12
0
Share

Where is the fuse box located in the Ford Escort?

The Ford Escort has two fuse boxes: one is located in the engine compartment, and the other is generally positioned on the left side of the steering wheel. Below are details about the Ford Escort fuse boxes: 1. Ford Escort fuse box locations: The vehicle has two fuse boxes—one is responsible for the safety of external electrical components, such as the ECU, windshield washer, headlights, horn, ABS circuit, etc., and is located in the engine compartment. The other ensures the proper functioning of internal electrical components, such as the cigarette lighter, power windows, electric seats, and airbags, and is typically situated on the left side of the steering wheel. 2. How to remove a fuse: Fuses should not be removed by hand. Each fuse box comes with tweezers for extracting fuses. Both ends of the tweezers can be used to remove large and small fuses. The green markings indicate fuses that commonly require replacement.
1
3
Share

What does 175/70r14 mean?

175/70R14 indicates a radial tire with a tread width of 175 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. Below is a detailed introduction to car tires: 1. Pneumatic tires are divided into two types based on their structure: tubed tires and tubeless tires. Passenger cars commonly use tubeless tires. Depending on the arrangement of the internal cord layers and cushion layers, tires can also be classified into radial tires and bias-ply tires. Radial tires are widely used in automobiles. These specifications are marked on the sidewall of the tire. 2. Tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the vehicle's suspension, they help absorb shocks during driving, ensuring a comfortable ride and smooth operation. They also maintain good traction between the wheels and the road, enhancing the vehicle's traction, braking, and off-road capabilities. Additionally, tires bear the weight of the vehicle, and their critical role in automobiles is increasingly recognized.
5
2
Share

What is the difference between 91v and 95w tires?

The differences between 91v and 95w tires are as follows: 1. Different load indexes: The load capacity of each 95w tire is 690 kilograms, while that of each 91v tire is 615 kilograms. The load index of tires generally ranges from 75 to 126, where a parameter of 75 means a load capacity of 387 kilograms per tire, and a parameter of 126 means a load capacity of 1700 kilograms per tire. 2. Different speed ratings: The maximum load speed of a 95w tire is 270 km/h, while that of a 91v tire is 240 km/h. Like the load index, the speed rating of tires is also represented by letters, ranging from A1 to ZR, indicating different maximum load speeds. A1 represents 5 km/h, and ZR represents 300+ km/h.
7
0
Share

What to Do If Your License Plate Has Been Registered for ETC?

The solutions for a license plate that has been registered for ETC are: 1. Contact the ETC service provider for verification and processing. 2. If it is confirmed that no ETC was registered, you can contact the staff to cancel it. 3. Then resubmit the required materials and reapply to bind a new ETC. Additional information: The methods for handling ETC after vehicle transfer are: 1. If both the vehicle and license plate have been changed, the owner can go to the bank to unbind the original ETC-linked bank card and then reapply for ETC for the vehicle. 2. If you have changed to a new car but kept the same license plate, simply take the ETC device to the service outlet and ask the bank to update the license plate number, engine number, etc., before reinstalling it. 3. After the vehicle is transferred, if the original owner wants to cancel the ETC, they can apply for cancellation.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.