Why is the ABS pump of Volkswagen Santana not pumping oil?

1 Answers
CamillaLee
07/29/25 5:49pm
Volkswagen Santana ABS pump not pumping oil is caused by ABS failure. Dirty sensor head: A dirty sensor head or contamination by magnetic substances can cause the wheel speed sensor to fail. If you find that the wheel speed sensor often malfunctions after driving through water, muddy roads, sandy roads, etc., you can try cleaning it and then checking. Consequences of wheel speed sensor failure: A faulty car wheel speed sensor can cause unstable engine idling. When starting the vehicle or slowing down to stop while driving, there may be momentary stalling or engine shutdown, reduced engine acceleration performance, incorrect speed display on the dashboard, and the engine warning light may illuminate. Function of ABS: The Anti-lock Braking System (ABS) automatically controls the braking force during car braking to prevent wheel lock-up, keeping the wheels in a state of rolling and sliding (with a slip ratio of about 20%) to ensure maximum adhesion between the wheels and the ground.
Was this review help?
13
2
Share
More Forum Discussions

How often should the transmission fluid in a Volkswagen Polo be changed?

Volkswagen Polo transmission fluid should be changed approximately every 50,000 to 60,000 kilometers. Here are some relevant details:1. Points to note when changing automatic transmission fluid: Special equipment for automatic transmissions must be used to completely remove the old ATF fluid and other impurities. However, automatic transmission fluid cannot be entirely drained by atmospheric pressure alone, as this method only removes about half of the used fluid. The remaining fluid, along with sludge and impurities, can accumulate in the valve body, torque converter, and cooling lines, leading to blockages in the system's internal fluid passages.2. Automatic transmission failure: Over 99% of automatic transmission failures are caused by overheating and the accumulation of impurities due to prolonged non-replacement of ATF fluid. Therefore, regular replacement of ATF fluid is crucial for the maintenance of an automatic transmission.
8
0
Share

Does a Damaged Roof Count as an Accident Vehicle?

A vehicle with a deformed roof due to impact is considered an accident vehicle. An accident vehicle refers to a car that has suffered damage from non-natural wear and tear incidents, leading to a decline in mechanical performance and economic value. Typically, an "accident vehicle" is one that has sustained structural damage. Additionally, water-damaged cars and fire-damaged vehicles also fall under the category of "special accident vehicles." There are three main causes that can lead to roof damage in vehicles, as outlined below: 1. Most common traffic accidents: After a collision, whether active or passive, the vehicle's roof is usually affected to some extent, resulting in twisting or denting and varying degrees of deformation. 2. Rollover accidents: In the event of a rollover, the roof is the most vulnerable part, often leading to large-scale collapse or severe deformation. 3. Falling objects from height: Objects falling from above are the most likely to cause roof damage. When parking, it is advisable to avoid areas near buildings to prevent potential damage from falling objects.
12
4
Share

Which country produces the George Patton?

George Patton is produced in the United States and is an imported ORV under USSV, known for its excellent endurance and off-road capabilities. The George Patton is modified based on the Ford F350, retaining its off-road performance while undergoing further exterior enhancements. The vehicle's frame features a revolutionary design, with more angular body lines. Taking the George Patton Battle Tank as an example: it is a large SUV with dimensions of 5930mm in length, 2537mm in width, and 2145mm in height, with a wheelbase of 3584mm. It is equipped with two turbocharged engines: a 3.5TV6 and a 6.7TV8, paired with a 10-speed automatic manual transmission and a 6-speed automatic manual transmission.
11
1
Share

How to Replace the Valve Stem of a Tubeless Tire?

The method for replacing the valve stem of a tubeless tire: 1. Apply butter to the valve stem; 2. Clean the rim; 3. Insert the valve stem into the round hole; 4. Adjust the angle with pliers; 5. Pull and install into place using a wrench. Tubeless tires, also known as 'low-pressure tires' or 'pneumatic tires,' have high elasticity and wear resistance, along with excellent adhesion and heat dissipation performance. Tubeless tires consist of three parts: the carcass, the cord ply, and the tread. The carcass is relatively soft, while the tread is more rigid. The cord ply in the middle strengthens the carcass and maintains its shape, often incorporating metal wires to enhance the tire's elastic performance.
18
5
Share

What are the differences between FAW and GAC?

The differences between FAW and GAC: different establishment times, different scales, different car brands, etc. The following is the relevant content introduction: 1. Different establishment times: FAW Toyota was established in 2000 and has a history of 18 years, while GAC Toyota was established in 2004 and has a history of 14 years. 2. Different scales: In terms of registered capital, GAC Toyota is basically only half the size of FAW Toyota. 3. Different car brands: FAW Toyota's models include: Vios, Corolla, Corolla EX, Reiz, RAV4, Crown, Prado, Land Cruiser, Prius, Coaster, etc. GAC Toyota's models include: Levin, Camry, Highlander, Yaris L, E'Z, Yaris, etc.
8
2
Share

Must the owner be present for new car registration?

New car registration does not require the owner to be present, but the vehicle must be driven to the registration office with the following documents: original and photocopy of the owner's ID, purchase invoice, original tax payment certificate or tax exemption voucher for vehicle purchase tax, original third copy of compulsory traffic insurance certificate, and the vehicle's factory certificate for domestically produced cars or import certificate for imported vehicles. If an agent handles the process, a power of attorney from the owner and the agent's ID and photocopy are also required. The new car registration process at the DMV includes: 1. Purchasing insurance for the new car; 2. Paying vehicle purchase tax; 3. New car inspection; 4. Document submission; 5. Vehicle inspection; 6. License plate selection; 7. Receiving vehicle documents; 8. Paying vehicle and vessel tax.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.