Why is shifting gears particularly troublesome in a car?

1 Answers
VonNora
07/29/25 6:19pm
When a vehicle's transmission exhibits difficulty in shifting gears smoothly, common potential faults may include internal gear wear or damage to the synchronizers within the transmission. Below are the specific functions of automotive transmission fluid: Improved shifting performance: Ensures smooth and seamless gear changes, enhancing driving control. Reduced corrosion: Provides excellent oxidation resistance, minimizing component rust. Extended lifespan: High-quality extreme pressure additives offer superior protection to gear assemblies. Delivers optimal anti-wear effects, prolonging the automatic transmission's service life. When changing transmission fluid, always opt for high-quality branded transmission oil. This effectively protects gears, reduces wear, facilitates easier vehicle operation, saves fuel, extends the fluid's service life, and lowers maintenance and repair costs.
Was this review help?
7
2
Share
More Forum Discussions

How many bars on the car temperature gauge are normal?

The normal range for the car temperature gauge is 2-4 bars, which corresponds to a temperature between 90-110 degrees Celsius. Normal water temperature: The water temperature refers to the temperature of the coolant. After the engine warms up, it typically displays 70-90 degrees as normal. When the coolant level in the radiator is low, the water temperature will rise, and it's necessary to add water. If the temperature gauge approaches the 'H' mark or the red danger zone, and in severe cases, the temperature warning light comes on, it indicates that the engine coolant temperature is too high. Working principle: The temperature gauge sensor is a thermistor-type sensor, which is fixed with threads to the engine coolant passage. The thermistor determines the current flowing through the coil windings of the temperature gauge, thereby driving the movement of the gauge needle.
12
0
Share

Does a new battery need to be charged for 12 hours?

A new battery does not need to be charged for 12 hours; the general charging time is around 8-10 hours. Functions of a car battery: The primary uses of a car battery are for starting and lighting in automobiles, motorcycles, tractors, diesel engines, etc. The car battery acts as a voltage stabilizer for the entire vehicle's electrical system, mitigating impact voltages in the electrical system and protecting the electronic equipment in the car. How a battery works: It converts chemical energy into electrical energy. Batteries are categorized into conventional batteries, dry-charged batteries, and maintenance-free batteries. Typically, when people refer to a battery, they mean a lead-acid battery. The normal service life of a car battery ranges from 1 to 8 years, depending largely on the condition of the vehicle.
16
0
Share

What Type of Oil Should Be Used for Honda Civic 1.5T?

Honda Civic 1.5T manufacturer recommends using fully synthetic oil with a viscosity of 0W-20 or 5W-30 for maintenance. However, if the car is primarily used for city commuting, 0W20 or 5W20 oil can be used. For those who frequently engage in aggressive driving, 0W30 or 5W30 oil is more suitable. For later maintenance or oil changes, brands like Shell and Castrol can be considered. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means the oil can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be interpreted as better lubrication performance under high-temperature conditions. The method for changing the oil in a Honda Civic 1.5T is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine's valve cover oil filler hole, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After turning off the engine, remove the oil dipstick to ensure the oil level is within the standard range.
5
4
Share

Can vehicle inspections be conducted on October 1st National Day?

In general, most locations do not conduct vehicle annual inspections during the National Day holiday. Vehicle inspection time standards: Operational passenger vehicles must be inspected once a year within 5 years; after exceeding 5 years, every 6 months. Trucks and large/medium-sized non-operational passenger vehicles must be inspected once a year within 10 years; after exceeding 10 years, every 6 months. Small and mini non-operational passenger vehicles must be inspected once every 2 years within 6 years; after exceeding 6 years, once a year; after exceeding 15 years, every 6 months. Inspection exemption policy: 6-seat and smaller family vehicles enjoy a 6-year inspection exemption policy. The prerequisite for the 6-year exemption is no major traffic accidents during this period. If an accident occurs, an on-site inspection is mandatory. 7-seat and larger vehicles do not qualify for the 6-year exemption policy and must still be inspected every 2 years for the first 6 years.
15
5
Share

What Causes the Key to Get Stuck After Parking?

Reasons why the key gets stuck after parking are as follows: 1. Key stuck after parking: First, check if the gear is in neutral, then turn the steering wheel slightly. 2. If the key cannot be removed after turning off the engine: It may be that the P gear did not touch the electronic sensor, or there may be debris inside. Check if there is any debris blocking the slot and clean it out. Then, shift the gear again and confirm it is properly positioned, after which the key can be removed. 3. If the key cannot be turned after insertion: It may be due to incorrect positioning during the last parking, causing the steering wheel to lock abnormally. Simply turn the key while gently shaking the steering wheel left and right.
6
4
Share

How Many Days in Advance Can Vehicle Owners Renew Their Driver's License?

You can apply for a license renewal at the vehicle management office up to 90 days before your driver's license expires. The consequences of failing to renew an expired driver's license are as follows: 1. If the license has been expired for less than one year: As long as the holder renews it promptly, there will be no issues. 2. If the license has been expired for more than one year but less than three years: The license will be in a "revocable but recoverable" status, and the holder must apply at the vehicle management office to take the Theory Test (Subject One). The license can only be retrieved after passing the exam. 3. If the license has been expired for three years or more: The license will be permanently revoked, and the holder must re-enroll in a driving school and retake all exams to obtain a new license.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.