Why is one side always wider than the other when reversing into a parking space?

2 Answers
AngelaAnn
07/25/25 7:01am
Because the operation is incorrect. If one side is wider than the other after reversing into the parking space, control the speed well, then manage the clutch properly, and slowly turn the steering wheel while observing the rearview mirror. If one side is wider than the other after reversing into the parking space, it has a lot to do with the speed and steering wheel control. Maintain proper speed, manage the clutch well, and slowly turn the steering wheel while checking the rearview mirror to align the car properly. Here are some related tips for adjusting the car's position: 1. Which way to turn the steering wheel: Turn the steering wheel in the direction the rear of the car is leaning. 2. Adjusting the car's position: When adjusting the car's position, turn the steering wheel 90 degrees, quickly turning and returning. 3. Correcting the direction: If there is more space on one side of the rear, adjust the car's position toward that side, and turn the steering wheel accordingly. Basically, every driving instructor for Subject 2 will teach students to complete the operation successfully by referencing specific points. However, since everyone's height and sitting posture are different, if you focus too much on the exact positions mentioned by the instructor during training, you might fail the test because everyone's reference points vary slightly. Always rely on your own observations.
Was this review help?
14
5
Share
PaigeMarie
08/10/25 6:22pm
When reversing into a parking space, one side being wide and the other narrow is most commonly caused by turning the steering wheel too late, missing the optimal timing. I used to make this mistake often when I first started learning to drive—I couldn't align the reference points properly when backing in, causing the car to tilt. Actually, this is related to the vehicle's steering characteristics; different cars have different turning radii, with SUVs being harder to control than sedans. Another factor is habit—some people tend to look from the left to the right, neglecting the distance on the right, or they adjust the seat too far forward, affecting visibility. Later, I learned to reverse more slowly, steer decisively, and rely more on both side mirrors rather than sticking my head out, which worked much better. Remember, find good reference points between the car body and the parking lines, practice more in open spaces, and balance will come naturally. Additionally, ground slope can affect parking, especially in underground garages with inclined surfaces, making reversing even harder—adjust the direction and position in advance.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What is the Function of Engine Start-Stop?

Engine start-stop function: By equipping a traditional engine with an enhanced motor featuring idle start-stop capability, the engine completely shuts off when the vehicle meets idle stop conditions. When the vehicle needs to move forward again, the idle start-stop motor system quickly responds to the driver's start command, rapidly restarting the engine with seamless transition, thereby significantly reducing fuel consumption and exhaust emissions. Below is more information about engine start-stop technology: 1. Engine start-stop technology automatically shuts off the engine when the vehicle comes to a temporary stop during driving; when it's time to proceed, the system automatically restarts the engine. 2. Working principle: When the vehicle stops due to traffic congestion or at an intersection, the driver presses the brake pedal and shifts to neutral. At this point, the Start/Stop system automatically checks that the engine is idling without being in gear, the wheel speed sensors of the anti-lock system show zero, and the electronic battery sensor indicates sufficient energy for the next start. Once these three conditions are met, the engine automatically stops rotating.
15
4
Share

Why Does the Car Sound Get Louder?

Here are the main reasons why a car's sound gets louder: 1. Too much engine oil: This increases the instantaneous working resistance of the engine, thereby increasing the rotational resistance of the crankshaft and reducing the engine's output power. Additionally, excess oil can enter the combustion chamber and participate in combustion, leading to oil burning, blue smoke emission, increased fuel consumption, and a louder car sound. 2. Incorrect oil type: If you previously used fully synthetic oil and now switch to mineral oil, it can cause the car sound to become louder and the engine to behave abnormally. Counterfeit or inferior quality oil can cause significant damage to the engine. It is essential to strictly follow the oil type recommended in the maintenance manual when adding oil.
9
5
Share

What does 'hold' mean in a car?

The 'hold' in a car refers to the automatic parking function. The working principle and usage method of automatic parking are as follows: Working principle of automatic parking: The automatic parking function provides accurate parking force through a slope sensor controlled by the controller. During startup, the parking control unit calculates information provided by sensors such as clutch distance, clutch engagement speed, and throttle pedal. When the driving force exceeds the driving resistance, the parking brake is automatically released, allowing the car to start smoothly. Usage method of automatic parking: When the driver has fastened the seat belt, the driver's side door is closed, and the engine is running, pressing the automatic parking switch activates the function from off to standby mode. When the brake pedal is depressed to a certain depth and the vehicle has come to a complete stop, the automatic parking function switches from standby to parking mode. While in parking mode, selecting the appropriate forward or reverse gear and pressing the accelerator pedal will cause the automatic parking to release automatically based on the slope gradient.
19
1
Share

Where is the windshield washer nozzle located?

The windshield washer nozzle of a car is located under the hood, inside the engine compartment near the bottom of the windshield. The specific steps to locate it are as follows: 1. Open the driver's door of the car. 2. Pull the hood release lever located on the left side of the driver's leg area. 3. Lift the car's engine hood upward. 4. Secure the engine hood with the support rod to ensure it is firmly held in place and to prevent any hazards during operation. 5. The windshield washer nozzle is situated under the hood, inside the engine compartment near the bottom of the windshield.
3
5
Share

Do Plug-in Hybrid Vehicles Need to Be Charged?

Plug-in hybrid vehicles do require charging. Here are the specific details: 1. In simple terms, a plug-in hybrid electric vehicle (PHEV) is a type of vehicle that falls between a pure electric vehicle and a traditional fuel-powered vehicle. It is equipped with both the internal combustion engine, transmission, drivetrain, fuel system, and fuel tank of a conventional fuel-powered car, as well as the battery, electric motor, and control circuitry of an electric vehicle. Moreover, its battery capacity is sufficient to support driving in pure electric mode for a certain distance and includes a charging port. 2. In principle, plug-in hybrid vehicles can operate without being charged because when the battery is depleted, the engine can drive a generator to produce electricity. This electricity is then directly delivered to the electric motor via the motor controller, which in turn drives the vehicle. The power battery can also be charged externally. If the battery pack becomes ineffective or unusable, the engine alone can drive the electric motor to power the vehicle. Additionally, the power battery can be charged while the vehicle is parked. 3. However, due to the presence of the battery, plug-in hybrid vehicles are significantly heavier than traditional gasoline-powered vehicles. When the battery is depleted, the fuel consumption over the same distance is higher compared to conventional gasoline cars. Therefore, it is recommended to charge the vehicle promptly to achieve fuel-saving purposes. 4. Under normal circumstances, a typical plug-in hybrid vehicle needs to be charged every 2 to 3 days, with the charging schedule arranged according to individual usage scenarios.
3
5
Share

What is the reason for the noise at idle speed that disappears when the clutch is pressed?

The causes of such abnormal noise are as follows: 1. It is basically a problem with the clutch. Most abnormal noises are caused by issues with the clutch release bearing. You can go to a professional repair shop to check the release bearing. Since the release bearing may be loose or detached, when the engine vibrates, the loose release bearing vibrates along with it, producing a rattling sound. When the clutch is pressed, the clutch presses it tight again, so there is no noise. When the clutch is released, the release bearing becomes loose again, and this cycle repeats. 2. Another possibility is that the noise is the sound of the transmission gears. This requires disassembly and inspection to determine the source of the noise. Generally, this kind of noise occurs in new cars and is a sound produced during machine processing, which is difficult to address.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.