Why is Lexus considered an IQ car?

What are the models of Giti Comfort Silent tires?

Giti Comfort Silent tires come in two tread patterns: 228 and 221. Below are the introductions for these two tire tread patterns: Comfort 221: The Comfort 221 is a tire that balances comfort and handling, capable of improving wet road grip to ensure driving safety in wet conditions. It employs 3P Silent Balance Technology and a shoulder angle design combined with transverse auxiliary grooves to achieve noise reduction and sound absorption. Additionally, the seamless nylon cap ply enhances the tire's comfort and stability. Comfort 228: The Comfort 228 is Giti's top-tier comfort tire. Besides offering silent comfort, it also features long mileage and fuel efficiency. Similarly, it utilizes 3P technology and a multi-pitch chaotic tread pattern arrangement to effectively reduce road noise.

11

3

Share

What does a car with a lock symbol on the dashboard indicate?

A car with a lock symbol on the dashboard represents the vehicle's engine immobilizer system. After locking the car, if the symbol does not flash, it indicates that the car is not properly locked or there is a malfunction in the anti-theft system. If it flashes, it means the anti-theft system is functioning normally. The immobilizer effectively prevents unauthorized engine starts, enhancing the vehicle's security. The functions of the car's anti-theft system include: Electronic anti-theft systems utilize signal transmitters and receivers to achieve theft prevention. These systems primarily consist of an electronically controlled remote or key, electronic control circuits, alarm devices, and actuators. The key contains a chip that amplifies its signal when near the ignition lock. The immobilizer's computer then verifies whether the key is authorized. If recognized, the engine can start; if not, ignition is blocked. By locking the ignition switch or preventing vehicle startup, the system achieves theft prevention. Once in "anti-theft" mode, an audible alarm is triggered. If issues arise with the system, visit a 4S dealership for repairs to prevent potential theft. For long-term vehicle storage, disconnecting the battery's negative terminal is an option, though this deactivates the anti-theft system. Alternatively, periodic driving helps maintain both the vehicle and battery health. Extended parking accelerates component aging. With technological advancements, modern vehicles universally feature electronic locks. A blinking red light when engaged is normal. These keyless systems eliminate external keyholes and include fuel cap protection, significantly reducing theft incidents. Electronic anti-theft system types include: key-controlled; remote-controlled; alarm-based; and combined immobilizer/movement prevention systems. During theft attempts, these may trigger alarms while simultaneously cutting starter, ignition, or fuel circuits to prevent vehicle movement.

8

0

Share

Should the Right Turn Signal Be Used When Reversing for Parallel Parking?

When reversing for parallel parking, it is necessary to use the right turn signal. Below are the lighting requirements and precautions for parallel parking: Lighting Requirements for Parallel Parking: The lighting requirement for parallel parking is to use the right turn signal when reversing to the right and the left turn signal when exiting the parking space. Precautions for Parallel Parking: When driving to the test position, the vehicle body must not exceed the white line; do not delay entering the parking space too much, as waiting until the entire vehicle is inside the space may make adjustments impossible, directly causing the vehicle to press against the right line, which is the most common reason for crossing the line; when reversing into the space, control the speed appropriately—if the speed is too fast, there may not be enough time to straighten the vehicle, resulting in the rear wheels pressing against the rear line of the vehicle or the vehicle body touching the line; the driver should not only focus on adjusting the front of the vehicle but also pay attention to the distance between the right wheel and the edge line as seen in the right mirror. Additionally, turning the steering wheel too quickly may cause the right wheel to exit the space and press against the edge line.

10

4

Share

How many points are deducted for the car body touching the edge line during parallel parking?

10 points are deducted for the car body touching the edge line during parallel parking. Below are the deduction criteria and techniques for parallel parking: Parallel parking deduction criteria: The task completion time must not exceed 90 seconds; exceeding the specified time results in disqualification; touching the parking space boundary line with the car body during movement deducts 10 points each time; failing to use or incorrectly using the turn signal when exiting the space deducts 10 points; stopping midway deducts 5 points each time. Parallel parking techniques: Ensure the car body is about 30 centimeters from the edge line of the parallel parking space and drive parallel past the space; move the vehicle forward, observe the right rearview mirror, and stop when the A corner of the space appears in the mirror; press the clutch, shift into reverse gear, and slowly back up; watch the right rearview mirror, and when the A corner disappears, turn the steering wheel fully to the right.

3

4

Share

Will Points Be Deducted If the Side Mirror Crosses the Line During Parallel Parking?

Whether points are deducted for the side mirror crossing the line during parallel parking depends on the regulations of the local examination center. According to the "Motor Vehicle Driving Training and Examination Syllabus," during the reverse parking test, as long as the vehicle body does not exceed the ground markings, no points will be deducted. Below are the point deduction standards and test requirements for parallel parking: Point Deduction Standards for Parallel Parking: If the vehicle body crosses the line after stopping in the parking space, it results in disqualification; stopping midway deducts 5 points; driving with tires touching the lane boundary line deducts 10 points; failing to turn on the left turn signal when starting deducts 10 points; failing to turn on the right turn signal when reversing deducts 10 points; not parking within the designated space results in disqualification; failing to complete the test within the specified time results in disqualification; each instance of the vehicle body touching the parking space boundary line deducts 10 points. Parallel Parking Test Requirements: The vehicle must be moved into the right-side parking space through one forward and one backward movement without touching or scraping the parking space poles, without the wheels touching the lane boundary lines or the parking space boundary lines, and with the vehicle aligned and wheels straight.

13

4

Share

Is it better to align with the B-pillar or the adjacent car when parallel parking?

If the adjacent car is long, you can align with its B-pillar. If the parking space is relatively large, aligning with the B-pillar of the adjacent car before reversing can prevent scratches between the two vehicles and make it easier for beginners to operate. Parallel parking The process is as follows: Determine if the parking space size is suitable: Before parallel parking, the driver should first visually estimate the size of the intended parking space to determine if the vehicle can fit. After confirming the space is suitable, proceed with parallel parking. Maintain distance from the right-side vehicle: Stop when the right rearview mirror aligns with the B-pillar of the right-side vehicle, keeping a distance of 50 centimeters. Reverse slowly: When the right headlight of the rear vehicle becomes visible in the left rearview mirror, straighten the steering wheel and continue reversing. Complete parallel parking: When the right side of the front bumper aligns with the left rear light of the front vehicle (from the driver's perspective, this means the right A-pillar of the vehicle blocks the left rear light of the right-side vehicle), turn the steering wheel fully to the left and continue reversing slowly. When the vehicle body is parallel to the road edge, straighten the steering wheel, make minor adjustments forward and backward, and complete the parallel parking.

3

5

Share

Why is Lexus considered an IQ car?

What are the models of Giti Comfort Silent tires?

What does a car with a lock symbol on the dashboard indicate?

Should the Right Turn Signal Be Used When Reversing for Parallel Parking?

How many points are deducted for the car body touching the edge line during parallel parking?

Will Points Be Deducted If the Side Mirror Crosses the Line During Parallel Parking?

Is it better to align with the B-pillar or the adjacent car when parallel parking?

What is the fuel consumption of Suzuki 250 per 100 kilometers?

Do commuter vehicles need to be licensed?

What Causes the Steering Wheel to Make Noise at Low Speeds?

Which has louder tire noise, Giti or Goodyear?