···
Log in / Register

Why is it required to complete the reverse parking test in one attempt?

5 Answers
OEmilia
07/29/25 4:03am

In the reverse parking test, it is explicitly required that the trainee must complete the maneuver in one attempt to assess their proficiency in vehicle operation. Here is more information: 1. Introduction: Reverse parking became a mandatory test item for obtaining a small vehicle driver's license after 2013. It evaluates the driver's ability to maneuver the vehicle in a confined space. Reverse parking is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. 2. Test area layout: The testing zone measures 16 meters in length and 6.83 meters in width, while the garage is 5.25 meters long and 2.31 meters wide.

Was this review help?
3
4
Share
DeKai
08/12/25 3:43pm

I think the key to successfully backing into the parking space in one go during the driving test lies in daily practice and precise control. I still remember when I first started learning to drive, I always had to adjust back and forth several times before parking properly. Later, I realized it was because I didn't position the car correctly. Before the test, I simulated the reversing scenario dozens of times and memorized the reference points taught by the instructor, such as turning the steering wheel one and a half turns when the wheel approaches the corner line of the parking space while maintaining an extremely slow speed, basically crawling in first gear. This way, the car body can smoothly enter the parking space without repeated adjustments. Mindset is also particularly important. I told myself that the test is just a check of my proficiency, so don't panic. If the speed is too fast or the steering is delayed by even a second, it might lead to crossing the line or misalignment, resulting in failure. Now, after developing this habit, I can easily handle daily parking as well.

Was this review help?
1
4
Share
Expand All
Rita
10/02/25 8:25am

I passed the reverse parking test on my first try last time, mainly because I was well-prepared beforehand. Remember to take time to familiarize yourself with the test site environment, understand the size and angle of the parking space, and practice reversing from different starting positions. The instructor mentioned finding reference points—I used the rearview mirror and body markings, such as turning the wheel immediately when the corner of the parking space reached the halfway point in the mirror. Control your speed slowly and steadily, avoiding sudden braking or accelerating too quickly. During the test, take deep breaths to stay calm, focus, and don’t let nervousness affect your movements. I also checked the tire condition to ensure there were no issues with low pressure. After a few more attempts, you’ll realize that success comes from repeated practice and confidence, not luck.

Was this review help?
11
0
Share
Expand All
VanBriella
11/16/25 3:21am

As someone who often helps friends practice reversing, I believe the secret to nailing it in one go is making good use of fixed reference points. When reversing, accurately gauge the distance relationship between the car body and the corner of the garage—for instance, turn the steering wheel about one and a half turns when the rear wheels form a 45-degree angle with the garage edge. Set the speed to the lowest to allow the car to move slowly, providing ample time for fine-tuning. During practice, I emphasize aligning the initial position correctly to avoid significant deviations. Before the test, it's advisable to check if the car mirrors are clear and unobstructed. Common mistakes include turning the wheel too sharply, causing the car to cross the line or miss the reference point. Adhering to a scientific approach can improve accuracy and reduce the number of maneuvers needed.

Was this review help?
19
4
Share
Expand All
LenaFitz
01/06/26 4:57am

To pass the reverse parking test in one go, I believe common mistakes must be avoided. I've seen many people needing multiple adjustments because they turned the steering wheel too early or too late, so I practiced finding the right timing first, such as turning the wheel when the car is one meter away from the parking space. Unstable speed is also an issue, so I set the crawling mode to stay calm and steady. After each operation, I check the rearview mirror to see if the wheel position is parallel to the parking line, and make timely corrections if not. Developing good habits like familiarizing yourself with the route in advance can prevent point deductions. Reverse parking isn't about brute force, but careful observation and rhythm. Before the test, I remind myself not to get distracted or make rash moves due to nervousness, which could affect safety.

Was this review help?
10
2
Share
Expand All
More Forum Discussions

What is the method for judging the failure of an air conditioning pressure sensor?

Method for judging the failure of an air conditioning pressure sensor: Power it separately and check if the zero-point output is accurate. If it is accurate, apply pressure and observe if there is any change in the output. If there is a change, it indicates that the sensor itself is functioning properly. A sensor is a detection device that can sense the measured information and convert the sensed information into an electrical signal or other required form of information output according to certain rules. The pressure sensor is installed on the pipeline of the outdoor unit of the air conditioner to detect pressure, and transmits the pressure detection results to the computer board, thereby controlling other components of the air conditioner.
17
4
Share

How many days does it take to update the indicators?

Indicator updates take three to four days. Here is more related content: The meaning of automobile indicators: Automobile indicators are primarily implemented as a regional information platform management system to address the increasing demand for vehicles, regulate automobiles to a certain extent, control the "orderly growth" of vehicle numbers according to certain standards, alleviate urban road traffic congestion, improve the climate environment (air quality), and perform other "multifunctional and rapid tasks." Main businesses updated by automobile indicators: Information related to car purchases, license plates, vehicle transfers, and other automobile-related services can be queried through the platform. Generally, results can be checked within 3-5 working days.
5
5
Share

What is the Significance of New Energy?

New energy is the cornerstone of future energy for human society and serves as a substitute for fossil fuels. Definition of New Energy: New energy, also known as unconventional energy, refers to various forms of energy beyond traditional energy sources. It includes energy types that are in the initial stages of development or under active research and awaiting widespread adoption, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy. Types of New Energy: All forms of new energy are directly or indirectly derived from the heat generated by the sun or the Earth's interior. This includes solar energy, wind energy, biomass energy, geothermal energy, hydro energy, ocean energy, as well as energy derived from renewable sources like biofuels and hydrogen.
9
1
Share

Why does the car make a buzzing sound with a resonance feeling?

Car buzzing with resonance feeling is due to exhaust pipe deformation or tensioner pulley wear. Introduction to Exhaust Pipe: The exhaust pipe is part of the engine exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. Typically, the three-way catalytic converter for controlling engine pollutant emissions is also installed in the exhaust system. The exhaust pipe generally includes the front exhaust pipe and the rear exhaust pipe. Impact of Exhaust Pipe Emissions: If the angle of the exhaust pipe is bent towards the sides of the car, the exhaust gases emitted while driving can cause thermal airflow impact injuries to pedestrians. Additionally, car exhaust contains unburned atomized oil residues, including pollutants such as sulfides and carbides, which can cause personal harm to humans.
15
0
Share

How to Identify the Correct Side of Snow Tires?

Snow tires can be identified for their correct side as follows: Tire Marking Differentiation: On the sidewall of the tire, there will be markings indicating "OUTSIDE" (outer) and "INSIDE" (inner). When installing the tire, simply ensure the side marked "OUTSIDE" faces outward and the side marked "INSIDE" faces inward. Arrow Marking Differentiation: Some tires have arrows on the sidewall indicating the rotation direction. For such tires, during installation, not only should the rotation direction indicated by the arrow be followed, but the side with the arrow should also face outward. Information Differentiation: Generally, the side with information such as the tire production date and tire size specifications should face outward, while the side with no or minimal markings should face inward.
3
4
Share

Where is the George Patton manufactured?

George Patton is manufactured in the United States. The George Patton off-road vehicle is an imported ORV under USSV. The George Patton off-road vehicle is a super off-road vehicle produced in the U.S., with only a very limited number available in China. This vehicle is named after the American general George Patton from World War II. The dimensions of this vehicle are 6000mm in length, 2500mm in width, and 2540mm in height. It is equipped with a V10 engine, a displacement of 6.8L, and a 6-speed automatic transmission. The interior features a two-tone mix-and-match design, with hand-stitched seats, exuding an elegant and classical style. Notably, the cockpit includes safety equipment such as a night vision system, satellite navigation, a biochemical gas protection system, and oxygen supply equipment, along with a multimedia audio-visual system and a high-tech satellite detection system.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.