Why is it okay to violate traffic rules at night?

1 Answers
MaverickMarie
07/30/25 9:34am
Traffic violations at night can still be captured and will be recorded as traffic offenses. Below is extended information about traffic violations: Electronic monitoring: Electronic eyes use induction lines to detect pressure from vehicles on the road. The signals are collected by sensors and sent to the central processor, where they are temporarily stored in a register (this data is valid for one red light cycle). The license plate recognition rate is over 95% during the day and over 90% at night. Methods to avoid violations at night: When driving at night, avoid speeding, tailgating, driving while fatigued, misuse of headlights, reckless overtaking, and drunk driving. Before overtaking, check whether there are obstacles on the right side of the vehicle being overtaken to prevent collisions if the vehicle swerves left to avoid obstacles.
Was this review help?
2
5
Share
More Forum Discussions

What are the symptoms of a faulty fuel injector in an old Jetta?

Manifestations of a faulty car fuel injector: 1. Engine vibration: When the car's fuel injector is damaged and fuel injection is obstructed, the engine may exhibit symptoms such as operational vibration during operation. 2. Decreased power and increased fuel consumption: As the fuel injector deteriorates, the fuel injection volume and pressure cannot be guaranteed, leading to symptoms of reduced vehicle power and increased fuel consumption. 3. Increased tailpipe emissions pollution: Malfunctions in the engine's fuel injector will inevitably affect the mixing and combustion of the combustible gas mixture, thereby increasing the pollutants in the vehicle's tailpipe emissions. 4. Difficulty starting or even stalling: If the fuel injector is severely damaged, the vehicle may experience difficulty starting, or even sudden stalling while driving. 5. Engine misfire: If the fuel injector in an individual cylinder is severely damaged, the engine is highly likely to misfire, resulting in severe engine vibration.
7
3
Share

What is the 0-100 km/h acceleration time for the Infiniti QX50?

According to official data, the Infiniti QX50 achieves a 0-100 km/h acceleration time of just 6 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Infiniti QX50 accelerates from 0-100 km/h in just 6 seconds with a torque of 390 Nm, while the Volvo XC60 achieves a 0-100 km/h time of 5.9 seconds with a maximum torque of 350 Nm. Transmission efficiency: The transmission serves as the medium for transferring power, inevitably involving some power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > automatic transmission > CVT transmission. The Infiniti QX50 uses a CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Infiniti QX50 accelerates from 0-100 km/h in just 6 seconds with a power-to-weight ratio of 160 Hp/T, while the Volvo XC60 achieves a 0-100 km/h time of 5.9 seconds with a power-to-weight ratio of 133 Hp/T.
12
5
Share

What is the fuel consumption of the Cruze 1.5 automatic?

The comprehensive fuel consumption of the Cruze 1.5 automatic is around 8L/100km. Additional information: 1. Powertrain: The vehicle continues to be equipped with 1.5L and 1.4T engines, delivering maximum power outputs of 114 horsepower and 150 horsepower respectively. For the transmission system, the 1.4T model is paired with a 7-speed dual-clutch transmission, while the 1.5L model comes with either a 6-speed automatic transmission or a 6-speed manual transmission. 2. Design: The Cruze sets a new benchmark in the global compact sedan segment with its exciting design style and craftsmanship. As a product of General Motors' latest global compact platform, Delta II, the Chevrolet Cruze innovatively interprets the characteristics of traditional three-box sedans with its dynamic coupe-like styling. The classic front grille, sculpted shoulder lines, and dual-cockpit interior design showcase Chevrolet's new design language.
2
2
Share

What is the reason why the Peugeot Citroen trunk cannot be locked?

The most likely possibility is that the trunk lock is damaged, or the lock block needs to be adjusted. Here are the specific details: 1. Specific reasons: Using overly stiff spring rods to allow the rear hatch to automatically rise after pressing the opening switch; improper matching between the closing limit rubber block and the locking mechanism; trunk control circuit failure; trunk hydraulic support rod failure. 2. Trunk: The minimum depth of the Citroen trunk is 1090mm; the maximum depth is 1895mm; the minimum width is 1035mm; the height is 510mm. The Citroen trunk is the car's storage compartment. The Citroen Elysee trunk mat can effectively protect the Citroen trunk, preventing dirt or liquids from entering and eroding the trunk surface, and also preventing items inside the trunk from sliding. The Citroen trunk can reduce the likelihood of interior contamination and damage, as cleaning the trunk mat is more convenient and economical than cleaning the interior. The thick base material can block chassis noise and tire noise, improving driving comfort. TPR-type Citroen Elysee trunk mats can also completely absorb residual noise and in-car audio echoes, protecting hearing from damage.
8
3
Share

What buttons does the old Jetta CD player have?

Old Jetta CD player button introduction is as follows: 1. RDM (Random) button: In normal playback mode, plays all tracks on the CD in sequential order. The display shows no symbol. To change playback order, press this button. Plays all tracks on the CD in random order. The display shows "RDM" 2. RPT (Repeat) button: In normal playback mode, plays all tracks on the CD in sequential order. The display shows no symbol. To repeat a specific track, press this button while that track is playing. The selected track will play continuously. The display shows "1" 3. SCAN (Scan) button: When pressed during CD playback, plays the first 10 seconds of all tracks. Press the button again to resume normal playback from the current track.
2
0
Share

What is the engine model of the Audi A6 Allroad?

The engine model used in the Audi A6 Allroad is DKW, with a maximum horsepower of 224 hp, a maximum power of 165 KW, a maximum power speed of 5000-6000 rpm, and a maximum torque of 350 Nm. This vehicle is equipped with a four-wheel-drive system. The engine used in the Audi A6 Allroad is imported, and the manufacturer is Audi AG in Germany. For the daily maintenance of the Audi A6 Allroad's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it may burst the filter element or open the safety valve, bypassing the filter and bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount of sludge remains suspended in the oil, while a large amount precipitates, clogging the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.