Why is it not recommended to change the rear axle oil of a car?

What is the ECO mode in Range Rover Sport?

The ECO in Range Rover Sport refers to the vehicle's economical driving mode function. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. The eco mode is categorized into active and non-active types. The difference lies in that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins to adjust settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active eco mode does not have a dedicated button. When the dashboard eco indicator light turns on, it serves merely as a reminder function. The eco mode automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most vehicles employ the active eco driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, we can activate the eco mode. However, it is unnecessary to enable the eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the eco mode's fuel-saving characteristics but also impact the vehicle's power performance. Additionally, the eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the eco mode to automatically deactivate. During idle parking or in N/P gear and manual mode, the eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the eco mode will not operate.

20

3

Share

What is the license plate Lu A from?

Lu A is the license plate for Jinan City, Shandong Province. The license plate codes for various cities in Shandong Province are as follows: Lu A for Jinan City, Lu B for Qingdao City, Lu C for Zibo City, Lu D for Zaozhuang City, Lu E for Dongying City, Lu F for Yantai City, Lu G for Weifang City, Lu H for Jining City, Lu J for Tai'an City, Lu K for Weihai City, Lu L for Rizhao City, Lu M for Binzhou City, Lu N for Dezhou City, Lu P for Liaocheng City, Lu Q for Linyi City, Lu R for Heze City, Lu S for Laiwu City, Lu U as a supplement for Qingdao City, Lu V as a supplement for Weifang City, and Lu Y for Yantai City. License plates serve as identification and information registration for vehicles, with the primary purpose of identifying the vehicle's region of registration and enabling the tracing of the vehicle's owner and registration details based on the license plate.

1

Share

What should be noted for a newly tinted car?

Here are the precautions to take after car window tinting: 1. Do not wash the car within the first two days after tinting to avoid causing bubbles in the film. Avoid using the rear window defogger for a week, as moisture that hasn't dried can adversely affect the defogger lines. You can use a towel, sponge, or soft cloth to gently wipe the film surface after tinting; 2. Try not to roll the windows up or down for several days after tinting. In newly tinted cars, the windows are still tight, and the heat-resistant film takes five to seven days to firmly adhere to the window. During this period, rolling the windows up and down can cause the edges of the new film to lift or the film to shift before it's fully bonded; 3. Never use chemical solvents to clean the tinted film. It's best to use a dedicated damp cleaning towel, water-dampened paper towels, or a cloth with mild detergent. A rubber squeegee can also be used for cleaning. Avoid using abrasive materials or hard tools during cleaning to prevent damage to the car film; 4. Try to avoid hanging small decorations on the windows after tinting. Whether using suction cups or items directly stuck to the tinted film, they can potentially damage the film. For the first 15 days after tinting, refrain from attaching or hanging anything directly on the film to prevent creating gaps between the film and the glass when removing decorations.

6

2

Share

Can a Modified Exhaust Pipe Pass the Annual Inspection?

Whether a modified exhaust pipe can pass the annual inspection depends on the specific circumstances. If the modification does not alter the vehicle's parameters, it can pass the inspection; however, if the vehicle's parameters are changed, it will not pass. Modifications such as altering the intake and exhaust systems, widening the body, lowering the chassis, changing braking components, or blindly upgrading high-beam headlights—all of which change the vehicle's technical parameters—will fail the annual inspection. Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual physical examination based on the safety technical conditions for motor vehicle operation. The annual inspection helps promptly eliminate potential safety hazards, encourages better vehicle maintenance, and reduces the occurrence of traffic accidents.

8

1

Share

What is the break-in period for the Bora in kilometers?

Bora's break-in period is 5,000 kilometers, while the engine's break-in period is 1,500 kilometers. An automobile is a mechanical product with numerous interconnected components working in unison. Due to limitations in machining precision, these parts initially lack optimal smoothness in their interactions. Therefore, both newly manufactured vehicles like the Bora and those that have undergone major repairs require a proper break-in period. As FAW-Volkswagen's first independently designed model, the Bora is acclaimed as a car that "inherits and surpasses the classics." Its body dimensions measure 4,523mm in length, 1,775mm in width, and 1,467mm in height, with a wheelbase of 2,610mm.

16

5

Share

What is the minimum ground clearance of the Honda Avancier?

The minimum ground clearance of the Honda Avancier is 203mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Sedans typically operate on flat urban roads, hence they have smaller ground clearance; off-road vehicles have larger minimum ground clearance to overcome bigger obstacles. The Avancier is a new SUV model launched by GAC Honda, based on the CONCEPT D concept car, featuring a popular coupe SUV style. In terms of body dimensions, the Avancier measures 4858mm in length, 1942mm in width, and 1670mm in height, with a wheelbase of 2820mm.

1

4

Share

Why is it not recommended to change the rear axle oil of a car?

What is the ECO mode in Range Rover Sport?

What is the license plate Lu A from?

What should be noted for a newly tinted car?

Can a Modified Exhaust Pipe Pass the Annual Inspection?

What is the break-in period for the Bora in kilometers?

What is the minimum ground clearance of the Honda Avancier?

What size tires can be fitted on 15-inch rims?

What does it mean when the car's engine light comes on?

Can the car door be opened when the car battery is dead?

What are the reasons why a motor vehicle won't start?