Why is Honda recalling fuel pumps?

1 Answers
LeAurora
07/30/25 8:10am
Honda's fuel pump recall is aimed at eliminating potential vehicle malfunctions. Here are some relevant details about the fuel pump recall: 1. Reason for recall: Due to improper resin molding conditions during the manufacturing process of the fuel pump impeller, the resin density of the impeller is insufficient. The impeller may swell and deform under the influence of fuel, causing interference with the fuel pump housing. This can lead to poor fuel pump performance, failure to supply fuel to the engine normally, and in extreme cases, may result in engine stalling while driving, posing a safety hazard. 2. Recall charges: The replacement of the fuel pump during the recall is free of charge, with no costs incurred. Additionally, replacing the fuel pump will not have any adverse effects on the vehicle. The purpose of the recall is to eliminate potential vehicle malfunction risks.
Was this review help?
12
3
Share
More Forum Discussions

What are the effects of insufficient coolant on a vehicle?

Insufficient coolant can lead to excessively high engine temperatures in a vehicle, which may easily cause engine damage. Automotive coolant, also known as antifreeze coolant, is a liquid that cools down the engine when it overheats, while also providing antifreeze, anti-corrosion, anti-rust, and anti-scale functions. The proper operation of a vehicle's cooling system is essential to ensure the normal functioning of the engine, and any faults related to the coolant system should not be overlooked. It is crucial to replenish the coolant promptly when it is insufficient. Prolonged lack of coolant can result in poor heat dissipation in the cooling system, causing the engine to overheat. In severe cases, this can lead to cylinder head deformation, piston scuffing, and even engine failure.
4
0
Share

What Lights Should Be Used When Driving at Night in the City?

When driving at night in the city, you should turn on the width marker lights and low beam headlights. If the lighting is insufficient or there are few oncoming vehicles, you can also use high beam headlights. However, it is important to note that when encountering oncoming traffic, you must switch from high beam to low beam to avoid affecting the visibility of oncoming vehicles and creating safety hazards. Width marker lights do not have a separate switch; they are automatically activated when the low beam headlights are turned on. As long as the low beam is on, the width marker lights will also be on. Width marker lights are suitable for use in low-visibility conditions such as dusk, twilight, rainy weather, dawn, rain fog, and haze. Additionally, if you encounter foggy conditions, you should also turn on the front and rear fog lights. When visibility on the highway is less than 100 meters, the speed should not exceed 40 kilometers per hour, and you should turn on the front and rear fog lights, low beam headlights, and marker lights, while maintaining a distance of more than 50 meters from the vehicle in front in the same lane.
15
3
Share

How to Handle a Malfunctioning Parking Sensor?

Methods to address parking sensor malfunctions: 1. Replace the buzzer of the parking sensor itself; 2. Repair the wiring of the parking sensor. After a parking sensor failure, the owner can check whether the power cable of the main unit is properly connected and if there is current, and inspect whether the radar main unit wiring has become loose. If neither of these is the issue, the problem may lie with the radar itself—either the parking sensor's buzzer is damaged or the wiring was harmed during recent modifications. The full name of the parking sensor is reverse parking collision avoidance radar, also known as a parking assist device. It is a safety aid for parking or reversing a car, consisting of ultrasonic sensors, a controller, and a display, among other components. It informs the driver about surrounding obstacles through sound or a more intuitive display, alleviating the hassle of checking all around when parking, reversing, or starting the vehicle. It also helps eliminate blind spots and unclear vision, enhancing driving safety.
1
5
Share

What is the tutorial for replacing coolant in the X-Trail?

X-Trail coolant replacement tutorial: 1. Locate the coolant drain screw, which is positioned right in the center of the bumper, and loosen it with a Phillips screwdriver; 2. After all the coolant has drained, you can add distilled water at the coolant filler port to flush the cooling system, rinsing out any residual coolant, then use an air gun to blow out excess moisture; 3. Tighten the coolant drain screw, add new coolant at the filler port until the level is between max and min, then start the engine to purge air. During this process, the coolant level will drop, so be sure to top it up promptly; 4. When the cooling fan starts running, it indicates the engine has reached normal operating temperature. At this point, if the coolant level is between max and min, you can close the coolant filler cap. The X-Trail is a compact SUV with a 5-door, 5-seat body structure. Its dimensions are 4675mm in length, 1820mm in width, and 1722mm in height, with a wheelbase of 2706mm.
16
2
Share

Is It Safe to Install a Neck Pillow in a Car?

Installing a neck pillow in a car is not safe. The space where the pillow is placed is actually designed to protect the driver's head in the event of a collision. If there is any protruding object like a neck pillow in this area, it could cause a fatal fracture to the cervical spine. Not placing a neck pillow is also a measure to ensure the safety of the driver's cervical spine. Vehicles equipped with active head restraints, or mechanical active headrests, move the headrest forward during a rear-end collision, reducing the distance between the head and the headrest. This limits the relative displacement of the shoulders and head during a collision, significantly reducing the probability of cervical spine injuries. Adding a neck pillow alters the relative position of the head and shoulders and is often too soft to restrict cervical spine movement during a collision, potentially leading to severe injuries. Moreover, since neck pillows are often fixedly connected to seat covers, they may also restrict the mechanical movement of active head restraints.
18
1
Share

Is the Ford Territory a Joint Venture Vehicle?

Ford Territory is a joint venture vehicle, an SUV jointly produced by Jiangling Group and American Ford, positioned as a compact SUV. The Ford Territory features a 5-door, 5-seat body structure, with dimensions of 4580mm in length, 1936mm in width, 1674mm in height, and a wheelbase of 2716mm. In terms of power, the Ford Territory is equipped with a 1.5T 140-horsepower turbocharged engine, paired with a CVT continuously variable transmission, and adopts a front-engine, front-wheel-drive layout. For suspension, the vehicle uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.