Why is ETC not deducting fees?

1 Answers
GrahamLynn
07/29/25 11:12am
The reasons why ETC does not deduct fees are: 1. The service is not activated or the minimum amount for SMS notification has not been reached; 2. The settlement time between the highway company and the bank has not arrived. Precautions for using ETC are: 1. Maintain a distance of more than 10 meters from the vehicle in front to prevent automatic sensing from paying for the vehicle in front; 2. When using a debit card to bind ETC, insufficient balance may also cause the deduction to fail; 3. The recognized speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, which may result in failed deductions. ETC is an automatic toll collection system for highways or bridges. It uses dedicated short-range communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, combined with computer networking technology to perform background settlement processing with the bank. This allows vehicles to pass through highway or bridge toll stations without stopping to pay the fees.
Was this review help?
6
5
Share
More Forum Discussions

Do I Need to Replace the Rims When Changing Tires?

Replacing tires does not require replacing the rims. As long as the rims are undamaged, you only need to replace the tires with the same size and specifications as the original factory tires during a tire change. There is no need to replace the rims as well. Tires, as components that directly contact the ground to bear the vehicle's weight and provide the necessary friction for driving, operate under extremely harsh conditions. They not only endure exposure to sun and rain but also withstand extreme cold in winter and high temperatures in summer. When replacing tires, it is crucial to ensure that the new tires match the original factory tire size and specifications, and that all four tires on the vehicle are of the same size and specifications. Using tires that do not meet the required specifications can significantly impact the vehicle's driving quality and even pose serious safety risks, creating major safety hazards.
13
5
Share

What is the method of pressing the clutch before braking?

The method of pressing the clutch before braking: If you encounter a red light at an intersection and need to stop, or when pulling over to the side, you should first press the clutch. When approaching the crosswalk, directly apply the brakes. This is because the lower the car's speed, the greater the frictional resistance between the tires and the ground. If you brake first, the engine is more likely to stall. The minimum speed for each gear is the speed when the engine is idling. When the speed in a certain gear is lower than this threshold, the engine is prone to stalling. When decelerating, as long as the current speed is higher than the idle speed of the current gear, there is no need to press the clutch. When braking in the current gear, as long as the engine speed does not drop below idle, there is no need to press the clutch.
10
2
Share

Which car has a dragonfly as its logo?

The car with a dragonfly logo is the Great Wall Huaguan QianTu. Here is some additional information about the Great Wall Huaguan: 1. Body dimensions: The vehicle's three-dimensional measurements are 4628×2064×1254mm, with a wheelbase of 2650mm. The front and rear tracks are 1780/1755mm respectively, featuring unequal front and rear track widths. 2. Body structure: The vehicle body incorporates numerous aluminum components and is covered with carbon fiber materials. The QianTu is equipped with a lithium-ion battery with a capacity of 42.1kWh. The car adopts a front double-wishbone and rear double-wishbone suspension combination.
14
1
Share

Differences Between Plug-in Hybrid and Hybrid Vehicles?

Below are the differences between plug-in hybrid and hybrid vehicles: 1. Charging Requirement: Hybrid electric vehicles do not require charging; they simply maximize the advantages of both the electric motor and the internal combustion engine to achieve fuel efficiency. Plug-in hybrid vehicles, on the other hand, require charging and can be used as pure electric vehicles for short-distance driving, thus consuming no fuel. 2. Energy Recovery Mode: Plug-in hybrid vehicles also feature an energy recovery mode, where under specific conditions, the vehicle can use fuel consumption to regenerate electrical energy. However, while plug-in hybrids have stronger battery storage capabilities, this also means they need to be charged and cannot be driven at any time, making them slightly more inconvenient to use.
16
4
Share

How to Determine the Distance Between the Car Front and a Wall

Because after the rearview mirror aligns with the base of the wall, the distance between the car front and the wall is approximately only fifty centimeters. Below are the distances when different parts of the car front come into contact with the vehicle body: 1. Front Wheel Tires: When the edge of the car front just "touches" the lower edge of the front vehicle's tires, the distance between the car front and the front vehicle is about 5 meters. 2. Above the Front Bumper: When the car front aligns with the lower part of the front vehicle's bumper, the distance between the car front and the front vehicle is about 3 meters. 3. Below the Front Bumper: When the car front aligns with the upper part of the front vehicle's bumper, the distance between the car front and the front vehicle is 1 meter.
2
3
Share

What Are the Determining Factors of Engine Displacement?

Engine displacement is determined by the size of the engine cylinders and the number of cylinders. Below are the relevant explanations: 1. Definition of Displacement: Displacement (Swept-volume), a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or expelled per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy of fuel into mechanical energy) per unit time, resulting in better "power performance." Therefore, off-road vehicles and sports cars typically have relatively larger displacements. The working volume through which the piston moves from the top dead center to the bottom dead center is called the cylinder displacement; if the engine has multiple cylinders, the sum of the working volumes of all cylinders is called the engine displacement. It is usually expressed in liters (L). 2. Importance of Displacement: Engine displacement is one of the most important structural parameters, representing the size of the engine more accurately than cylinder diameter and number of cylinders. Many performance indicators of the engine are closely related to displacement.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.