Why is a galloping horse the logo of a car brand?

What Causes the Transmission Noise in the Envision?

Transmission noise can be caused by the following reasons: Wear and damage of bearings: When bearings wear out, the gap increases, and the fitting accuracy decreases. When bearings are damaged, abnormal noise occurs as they cannot operate normally, potentially leading to damage of transmission components and exacerbating the issue. This can also be caused by the wear of transmission components or the use of replacement parts with excessively low precision, such as gear wear or mismatched gear clearance. Insufficient or overly viscous lubrication oil leading to poor lubrication: In such cases, the corresponding lubricating oil (grease) should be replaced; otherwise, it will accelerate transmission wear and shorten its service life. Loose bolts on the transmission housing (end cover): Vibrations during operation can loosen bolts, so regular inspections are necessary.

19

1

Share

Where is the jack located in the Explorer?

Adjust the third-row seats to the seating position, remove the inner trunk panel, and lift the trunk floor to reveal the spare tire. The jack, socket, and wrench are locked onto the spare tire. Minimum height of the jack: The minimum height refers to the distance from the top of the seat to the ground when the jack is not in use, representing the hydraulic condition height. Auxiliary height of the jack: The auxiliary height refers to the maximum height achievable by rotating the threaded seat from its end. The height after rotation is called the auxiliary height. Maximum height of the jack: The maximum height is achieved by extending the jack to its highest point. If there is an auxiliary height, rotate it to the highest position as well. The sum of these two heights is the maximum height.

7

0

Share

How to Solve the Strong Odor in Older BMW Cars?

Solutions for the strong odor in older BMW cars include: 1. Opening the windows: This is the most cost-effective method to remove formaldehyde. Simply opening the windows allows fresh air to enter the car, diluting and purifying the formaldehyde. 2. Sun exposure: Park the car in a place where it doesn't affect anyone and where the sun can directly shine on it. Open all the doors and expose the car to the sun for about 2 hours. Using this method 2-3 times can effectively remove carcinogens like polycyclic aromatic hydrocarbons as well as odors from the car. This method is very effective. However, be cautious of the potential damage caused by high temperatures and ensure proper maintenance.

3

5

Share

Why is there no internet after connecting to BMW's onboard wifi?

There may be no internet after connecting to BMW's onboard wifi due to unstable signals. Here are specific introductions about BMW: 1. Appearance: The body proportions exhibit powerful yet smooth characteristics. With dimensions of 4.86m×1.93m×1.78m, it clearly demonstrates its pursuit of vehicle agility and excellent handling performance. It combines a strong yet docile appearance. The 19-inch oversized wheels, short front overhang, and carefully arranged side lines make its shape more rugged and dynamic. 2. Power: Equipped with a 2.0T engine with a maximum power of 245 horsepower.

4

0

Share

What Causes Engine Noise in Cars?

Reasons for engine noise in cars: 1. If a rhythmic "ticking" sound comes from the upper part of the engine and its frequency increases with engine speed, this abnormal noise originates from the piston top hitting the cylinder head; 2. If "clanking" or "tapping" sounds are heard from the side of the engine block during operation, it indicates a cylinder knock fault; 3. Rough engine operation can, in extreme cases, cause connecting rod bending deformation. A bent connecting rod will deflect the direction of cylinder reciprocating motion, resulting in knocking sounds during piston movement reversal; 4. Excessive valve clearance can cause continuous "clicking" contact sounds around the cylinder head during cold engine operation. The frequency of this noise is directly proportional to engine speed but tends to diminish as the engine warms up.

20

0

Share

How to Adjust Front Wheel Camber?

Front wheel camber adjustment involves tilting the top of the wheel outward, which refers to adjusting the angle between the wheel's plane and the vertical longitudinal plane. Below is an introduction to front wheel camber: 1. Effect one: On one hand, it allows the wheels to roll closer to vertical road surfaces, reducing sliding and steering resistance, thereby improving the ease of front wheel steering operation. 2. Effect two: On the other hand, it reduces the load on bearings and their lock nuts, extends service life, and enhances steering safety. To prevent wheel deformation when fully loaded, which may cause the upper part of the wheel to tilt inward and damage tire connecting parts, vehicles are generally set with a slight outward tilt (about 1 degree). 3. Negative effect: Excessive negative camber can cause inner tire wear, accelerate wear on suspension system components, and cause the vehicle to pull towards the side with less negative camber.

5

0

Share

Why is a galloping horse the logo of a car brand?

What Causes the Transmission Noise in the Envision?

Where is the jack located in the Explorer?

How to Solve the Strong Odor in Older BMW Cars?

Why is there no internet after connecting to BMW's onboard wifi?

What Causes Engine Noise in Cars?

How to Adjust Front Wheel Camber?

Why does the Passat New Lingyu make noise when turning the steering wheel?

What are the reasons for the Cayenne tire pressure warning?

How Bright Are Audi's Headlights?

What is the difference between wet and dry transmissions?