···
Log in / Register

Why is a 95% passing score required for Subject One?

1 Answers
MacCamila
07/28/25 9:32am

There is no such statement. According to the regulations on the application and use of motor vehicle driving licenses, the passing score for Subject One of the motor vehicle driving license test is 90 points, with a full score of 100 points. The test randomly selects 100 questions from the question bank, with each question worth 1 point, and the test duration is 45 minutes. Subject One test content: Driving license and motor vehicle management regulations; Road traffic conditions and traffic regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; Special knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One test precautions: During the Subject One test, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in the locker before entering the examination room. Upon entering the examination room, the identity verification area will assign seats. After finding your seat, begin the test. Ensure the camera is aligned with you and adhere to test discipline. If you fail the first attempt, there is a retake opportunity on the same day. If you fail again, you will need to pay and reschedule. After the test, queue to collect the score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can schedule the Subject One test. Each subject can be taken once, and if you fail, you can retake it once. If you do not attend the retake or fail the retake, the test will be terminated, and the applicant must reschedule. However, Subject Two and Subject Three only allow five attempts. Subject Two and Subject Three tests must be scheduled at least ten days apart. If you fail the Subject Three safety and civilized driving knowledge test, the previously passed road driving skills test scores remain valid. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject One refers to the test on road traffic safety laws, regulations, and related knowledge. Subject Two refers to the field driving skills test. Subject Three is divided into two parts: road driving skills and safety and civilized driving knowledge tests. The safety and civilized driving knowledge test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such thing as Subject Four.

Was this review help?
16
0
Share
More Forum Discussions

Can the Electronic Parking Brake Be Used for Emergency Braking When the Car's Brakes Fail?

When the car's brakes fail, the electronic parking brake cannot be used for emergency braking. Relying solely on the electronic parking brake for braking is relatively inefficient. It is recommended to use manual mode to downshift and utilize the engine's resistance for cooperative braking. The mechanical parking brake operates on the lever principle, controlling the cable to press the rear brake pads for parking. However, due to the limited force of the cable, it cannot effectively brake in emergency situations. Unlike the mechanical parking brake, the electronic parking brake involves a two-step process during braking. At higher speeds, it controls the ABS through the car's EPC system, applying intermittent electronic braking with a force slightly less than emergency braking. Therefore, when using the electronic parking brake for emergency braking, you may hear a clicking sound. Generally, braking with the electronic parking brake requires a longer distance, and it should not be used as an emergency brake.
20
4
Share

How to Disinfect Germs in the Car?

Methods for disinfecting germs in the car: 1. Keep the car floor, inner walls, steering wheel, door handles, seats, and other areas clean. Wipe these surfaces with a disinfectant containing effective bromine once a day; 2. Change and wash seat covers frequently. Soak them in a disinfectant containing effective bromine for 30 minutes weekly, then rinse with clean water, dry, and reuse; 3. If an infectious patient is found in the car, disinfect immediately after the patient leaves using the above methods; 4. During an epidemic, spray the disinfectant on surfaces several times a day during breaks between rides; 5. In seasons when air conditioning is not needed, open windows for ventilation, especially for taxis that require air conditioning. Try to open windows for ventilation when there are no passengers.
4
0
Share

What are the body dimensions of the Cavalier?

The body dimensions of the Cavalier are 4474mm in length, 1730mm in width, and 1471mm in height, with a wheelbase of 2600mm. The Cavalier is a compact sedan under SAIC-GM Chevrolet, equipped with an Ecotec 1.0T dual-injection turbocharged engine and a 6-speed wet dual-clutch intelligent start-stop transmission. In terms of exterior design, the Cavalier features Chevrolet's signature dual-layer front grille with a "Gale" gradient texture inside, adding a touch of dynamism compared to current Chevrolet models. The headlight assembly is adorned with chrome trim and an innovative double L-shaped LED daytime running light strip, which comes as standard across all models.
17
2
Share

What are the symptoms of a faulty oxygen sensor in a motorcycle?

Symptoms of a faulty oxygen sensor in a motorcycle: The engine experiences decreased power and increased fuel consumption. The oxygen sensor is a very important component that detects the oxygen content in the exhaust and feeds the signal back to the ECU, allowing the ECU to adjust the air-fuel ratio. Low-end motorcycles do not have oxygen sensors; only some motorcycles equipped with fuel-injected engines are fitted with oxygen sensors. The oxygen sensor is installed in front of and behind the three-way catalytic converter. The oxygen sensor in front is called the front oxygen sensor, while the one behind is called the rear oxygen sensor. The main function of the rear oxygen sensor is to detect whether the three-way catalytic converter has failed.
20
1
Share

How should pure electric vehicles be maintained?

Maintenance methods for pure electric vehicles: mainly involve daily care for the battery pack and motor, and keeping them clean. First, perform an exterior inspection, including checking the steering wheel, seat belts, various switches inside the vehicle, and whether the combination instrument is functioning normally. Verify the functionality of the lights and horn, the aging degree of components like the wipers, and the inflation condition of the tires along with any damage or wear. For electric vehicles, it's necessary to check the antifreeze, brake fluid, and windshield washer fluid. Electric vehicles also use antifreeze, but unlike traditional vehicles, the antifreeze is used to cool the motor and should be replaced according to the manufacturer's specified intervals, typically every 2 years or 40,000 kilometers. The type of antifreeze is exactly the same as that used in traditional cars. Gear oil (transmission oil) is a fluid that needs to be replaced more frequently in electric vehicles, but the replacement intervals vary by manufacturer.
11
1
Share

How is the battery charged?

The charging method of the battery: Connect the positive terminal of the battery to the positive terminal of the power supply, and the negative terminal of the battery to the negative terminal of the power supply. Then, the initial charging is carried out in two stages: First, charge with the initial charging current until the electrolyte releases bubbles and the single-cell voltage rises to 2.3 to 2.4V. Then, reduce the current to half of the initial charging current and continue charging until the electrolyte releases intense bubbles and the voltage remains stable for 3 consecutive hours. The total charging time is about 45 to 65 hours. During the charging process, the temperature of the electrolyte should be frequently measured. Use methods such as halving the current, stopping charging, or cooling to control the temperature between 35 to 40 degrees Celsius. If the specific gravity of the electrolyte does not meet the requirements after the initial charging is completed, adjust it with distilled water or electrolyte with a specific gravity of 1.4. After adjustment, charge for another 2 hours until the specific gravity meets the requirements.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.