Why Hasn't the New Electric Car Battery Been Fully Charged After Eight Hours?

Are the Engines of Corolla and Levin the Same?

Corolla and Levin are equipped with the same engines. Below are the four types of engines installed in Corolla and Levin: 1. 9NR-FTS four-stroke engine (1.2T): Power output is 116 horsepower, with torque reaching 185N·m. 2. 1ZR-FE four-stroke engine (1.6L): Power output is 122 horsepower, with torque of 154N·m. 3. 2ZR-FE four-stroke engine (1.8L): Power output is 140 horsepower, with torque of 173N·m. 4. 8ZR-FXE four-stroke engine (1.8L hybrid): Engine power is 99 horsepower, with engine torque of 142N·m.

20

4

Share

Where is Hawtai Motor's production location?

Hawtai Motor has three production bases, located in Rongcheng, Shandong; Ordos, Inner Mongolia; and Yanbian, Jilin. Below is relevant information about Hawtai Motor: 1. Hawtai Motor was the first domestic company to launch SUV models. Its product lineup includes SUV models such as the Hawtai Santa Fe, Terracan, and Baolige, as well as multiple sedan models like the Lusheng E70, Lusheng E80, and Hawtai B11. It also offers competitive new energy vehicle products including the pure electric family sedan Hawtai New Energy iEV230 and the pure electric SUV Hawtai New Energy XEV260. 2. With new energy vehicles as its core business, Hawtai Motor Group has established a low-carbon automotive industry chain encompassing key new energy vehicle technologies, AT automatic transmissions, clean gasoline and diesel engines, passenger vehicles (SUVs, sedans, and electric vehicles), and commercial vehicles, dedicated to providing global users with energy-efficient, environmentally friendly, and high-performance automotive products. 3. Hawtai Motor Group operates China's largest and most advanced powertrain manufacturing facilities for clean gasoline and diesel engines and automatic transmissions.

3

1

Share

Where is the cabin air filter located in a Mazda 3?

Mazda 3's cabin air filter is located inside the glove compartment on the passenger side. 1. The specific installation method for Mazda 3's cabin air filter is as follows: ① Use a screwdriver to remove the screws on the center console side plastic panel near the driver's left leg position, then remove the plastic panel. ② Unscrew the plastic clips and screws on both sides of the glove box, then remove the glove box. ③ Remove the screws and plastic clips on the cabin air filter cover, then take it off to replace the new filter. ④ After replacing the new cabin air filter, follow the reverse order of removing the cover and plastic panels to reinstall them. 2. Precautions for cabin air filters: ① Clean the cabin air filter approximately every 5,000 kilometers of driving, and replace it approximately every 7,000-8,000 kilometers of driving. ② When replacing the cabin air filter, it's best to use genuine OEM filters to ensure quality. ③ Some vehicle models' cabin air filters can only be replaced, not cleaned - this must be noted. ④ If there is a musty smell inside the car when the air conditioning is turned on, or if the air conditioning is not cooling or heating properly, the cabin air filter should be cleaned or replaced immediately.

19

5

Share

What does the yellow exclamation mark on the Lexus RX dashboard mean?

When a yellow exclamation mark appears on the car dashboard, there are 4 possible scenarios: general fault, automatic transmission fault, abnormal tire pressure, or lighting fault. Below is a detailed analysis of these 4 situations: General Fault: An exclamation mark inside a triangle indicates a general performance or component/function fault in the car. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid level. Transmission fluid should be replaced promptly. Abnormal Tire Pressure: An exclamation mark inside parentheses with a line underneath represents the tire pressure monitoring warning light. This light illuminates when tire pressure is too low. Check and adjust the tire pressure to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunctioning light. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to locate the issue. Additionally, a red exclamation mark inside a circle with parentheses indicates a braking system warning, typically caused by brake system failure or low brake fluid level. Immediate inspection of the braking system is required to prevent accidents.

12

0

Share

How to Replace the Cabin Air Filter in a Chevrolet Spark?

The cabin air filter in the Chevrolet Spark is located behind the glove box, which needs to be removed for replacement. Detailed Steps for Replacing the Cabin Air Filter in a Spark: 1. Open the glove box and unhook the small latch on the right side. 2. Press both sides of the glove box inward to release it. 3. Remove the glove box, release the clips on both sides, take out the old filter, install the new one, and reposition the glove box. Installation Notes: 1. Pay attention to the orientation of the filter during installation to ensure it is not installed backward. The filtering surface should cover the entire air duct tightly. 2. Be careful to adjust the appropriate force when tightening screws or removing clips. 3. Purchase cabin air filters from reputable manufacturers and compare the appearance and dimensions to ensure proper fitment.

20

3

Share

How to reset the maintenance reminder for Kia K5?

Kia K5 maintenance light reset steps: 1. First, turn the Kia K5's power to ON mode. 2. Next, press the steering wheel toggle button to switch to user settings, where you can see the maintenance settings. 3. Finally, press the OK button to enter maintenance settings, then hold the OK button to reset the oil maintenance mileage/time. The main function of the maintenance light is to record usage mileage of important components. When it illuminates, it indicates the vehicle requires service. Technicians can also reset the maintenance light using diagnostic equipment, which is the second method for resetting the maintenance reminder.

20

0

Share

Why Hasn't the New Electric Car Battery Been Fully Charged After Eight Hours?

Are the Engines of Corolla and Levin the Same?

Where is Hawtai Motor's production location?

Where is the cabin air filter located in a Mazda 3?

What does the yellow exclamation mark on the Lexus RX dashboard mean?

How to Replace the Cabin Air Filter in a Chevrolet Spark?

How to reset the maintenance reminder for Kia K5?

How to Reset the Tire Pressure Warning Light on a Golf?

Left Foot or Right Foot for the Accelerator?

What is the correct method for beginners to start an automatic transmission car?

What does 'code' mean in a car in Chinese?