Why Has the Blue Energy Bar on the BMW Dashboard Disappeared?

What is the name of the ring inside the tire?

The ring inside the tire is called the wheel hub, also known as the rim or steel ring. It is a cylindrical metal component used to support the tire and is an important part of automotive components. When driving, special attention should be paid to the maintenance of the wheel hub, as it is prone to accumulating dirt. If not cleaned for a long time, it may corrode and deform, potentially leading to safety hazards. In the market, wheel hubs can be categorized into steel wheel hubs and alloy wheel hubs based on material. The main advantages of steel wheel hubs are their simple manufacturing process, relatively low cost, and strong resistance to metal fatigue. Alloy wheel hubs are lighter in weight, have lower inertial resistance, higher manufacturing precision, and less deformation during high-speed rotation. They also help improve the car's straight-line driving performance, reduce tire rolling resistance, and consequently decrease fuel consumption.

3

Share

What are the reasons for car headlights not working?

The reasons for car headlights not working include: blown headlight fuse, burnt-out headlight bulb, damaged headlight relay and combination switch, or poor contact in the headlight wiring. Car owners can visit a nearby repair shop or 4S store for a detailed inspection of the vehicle. Solutions for car headlights not working: 1. Check if the fuse is in good condition; if the fuse is damaged, replace it. 2. Wiring issues: If the wiring connections are loose or poorly connected, simply tighten the wiring connectors. 3. Overheating wires: Overheating wires can increase resistance, reducing the brightness of the headlights. In severe cases, the headlight wiring may short circuit due to the melting of the wire insulation. Allow the wires to cool down. 4. If the contacts of the headlight wiring control relay or combination switch are corroded or stuck, preventing the circuit from opening or closing, replace them.

12

3

Share

What is the Golf model with four exhaust pipes?

It is the Golf R model. More details about the Golf R are as follows: In terms of appearance, it does not differ much from the standard Golf, featuring full LED headlights and a very sporty body kit. The blue color is called Biscay Blue, representing passion and symbolizing a member of Volkswagen's performance family. With this sporty body kit, the front bumper has a smaller ground clearance, incorporating some black elements to appear even more athletic. The side profile of the car is almost identical to the standard version, except for larger wheels with a size of 225/40R18. The quad exhaust at the rear is absolutely intimidating, with a notable exhaust note, and the rear badge is minimalistic, featuring only a simple capital 'R'. The interior does not have many highlights, remaining very Volkswagen-like, but the steering wheel differs from the flat-bottom design of the standard version, appearing more sporty. The instrument cluster has a blue background, giving it a very aggressive look. In terms of power: the engine still uses the EA888, a 2.0T high-performance engine, with a maximum horsepower of 290 hp and a peak torque of 380 Nm, paired with a 7-speed dual-clutch transmission.

15

5

Share

What is the remote control pairing method?

Remote control pairing method is: Get in the car and close all doors, open the driver's door, insert the key, turn it on and off five times in a row. On the fifth time, the hazard lights will flash once. Simultaneously press and hold the lock and unlock buttons on the remote control that needs to be paired, press them several times repeatedly. When the hazard lights flash twice, it indicates that the remote control has been successfully paired. Components of the remote door lock system: 1. Transmitter; 2. Receiver; 3. Remote door lock control module; 4. Door lock control module; 5. Actuator. The working principle of a car remote control is that when the owner presses a button on the key, the key end sends out a signal containing corresponding command information. The car's antenna receives the radio signal, and after authentication by the Body Control Module (BCM), the actuator performs the locking or unlocking action.

3

5

Share

Does Door Panel Painting Require Door Removal?

Door panel painting requires door removal. Even for just door panel painting, the door needs to be taken off. The door contains numerous wiring connections, such as power window regulators, electric locks, etc., along with door liners. If the door isn't removed for panel work, these wires could be damaged. Panel work involves applying force to the door, which may cause it to sag. Additionally, the limited space inside the door makes tool access difficult, making removal more conducive to effective panel painting. Panel Work Process: Full Vehicle Disassembly: Remove all panel components that require painting. Body Repair: Address damages such as dents from impacts or rollovers, bent frames, dimensional shifts through replacement, stretching, welding, etc. Panel Component Repair: Restore all damaged panels to their original appearance and dimensions using adhesives, welding, etc. Panel Component Fine-Tuning: Realign repaired doors, lights, and other panels, as well as displaced mechanical and electrical components. This requires exceptional skill and patience to achieve precise installation and aesthetic appeal. Full Vehicle Reassembly: After painting, reinstall and secure all panel components, followed by testing all movable panel parts.

2

1

Share

Is it necessary to drive the vehicle for out-of-town vehicle file transfer?

Out-of-town vehicle file transfer requires driving the vehicle for the transfer process, and the vehicle must be registered at the local vehicle management office in the new location. Here are the relevant details: 1. File Transfer: The vehicle must be driven to the site for the file transfer, and the relevant documents for the transfer must be brought along. Vehicle file transfer refers to the process of transferring the vehicle's file from the local vehicle management office during a used car transaction, allowing it to be relocated to a specified new registration area and owner. Once specified, it is difficult to change. Vehicle transfer and file transfer are specific to used cars and are only required for used car transactions. 2. Registration Deadline: The original owner must be present for the vehicle transfer and file transfer process. Without the original owner's identification documents, the file transfer cannot be processed. Both the buyer and seller must provide their ID cards, vehicle license, vehicle registration certificate, and the vehicle itself to the vehicle management office for the file transfer. Normally, the file transfer document will specify a registration deadline, usually two weeks or one month. The buyer must complete the relevant procedures at the vehicle management office within this deadline; otherwise, they will need to return to the original vehicle management office to re-initiate the file transfer process.

17

2

Share

Why Has the Blue Energy Bar on the BMW Dashboard Disappeared?

What is the name of the ring inside the tire?

What are the reasons for car headlights not working?

What is the Golf model with four exhaust pipes?

What is the remote control pairing method?

Does Door Panel Painting Require Door Removal?

Is it necessary to drive the vehicle for out-of-town vehicle file transfer?

Which brand does Bentley belong to?

What type of engine oil does the Crown sedan require?

What is the fuel consumption of the Vezel 1.5t?

How to Call for Fuel Delivery When Your Car Runs Out of Gas?