Why Has Lingyun Auto Never Been Listed?

1 Answers
DiCole
07/24/25 1:32am
It has already been listed, in June 2020. Below is the relevant introduction: Overall Introduction: The Lingyun two-wheeled electric vehicle is a car launched by Beijing Lingyun Intelligent Technology Co., Ltd. The vehicle's size and weight are only half that of a conventional car, with battery energy consumption reduced to one-third of existing market electric vehicles. It enables plug-and-play battery charging like a mobile phone, eliminating the need for charging stations. Core Technology: Using mechanical gyroscopes to control vehicle balance. In simple terms, it applies aerospace attitude control technology—also the gyroscope technology used in mobile phones—to automobiles. With just two wheels (front and rear), the car can maintain balance at high speeds. Once the system detects any tilt in the car body, it automatically corrects it.
Was this review help?
20
3
Share
More Forum Discussions

Where is Mercedes-Benz produced in China?

Mercedes-Benz is produced in Beijing and is called Beijing Benz. Joint Venture: The company is named Beijing Benz Automotive Co., Ltd., established on August 8, 2005. It was jointly funded by Beijing Automotive Group Co., Ltd., Daimler AG, and Daimler Greater China Ltd. The factory is located in the Beijing Economic-Technological Development Area, with an annual production capacity of 100,000 vehicles. Performance: The well-balanced SLK sports car is equipped with a 4-cylinder 2.3-liter turbocharged engine, delivering a maximum output of 193 horsepower. It consumes 8.2 liters of fuel per 100 kilometers and accelerates from 0 to 100 km/h in just 6 seconds, with a top speed of 237 km/h. The engine also features a variable valve timing system that works with electronically controlled magnets to provide oil pressure to a chamber in the camshaft drive chain, gently rotating the camshaft and altering the valve opening and closing times based on cam and piston movement.
18
3
Share

What does 'bar' appearing on the car mean?

When 'bar' appears on the car, it indicates low tire pressure. Solutions: 1. Check if the tire is leaking air (the 'bar' light typically comes on with slow leaks). If there's a leak, immediately repair or replace the tire; 2. If unsure about air leakage, simply inflate the tire and observe if the pressure normalizes; 3. If the above issues are resolved, restarting the engine will make the 'bar' display on the dashboard automatically disappear. Tire pressure is crucial for tires - it must not be too high or too low. If the pressure is too low, the tire may experience wave-like deformation during high-speed driving, increasing the risk of a blowout and reducing tire lifespan. If the pressure is too high, it reduces the contact area between the tire and the ground, affecting the car's handling and driving stability.
4
0
Share

What is the fuel consumption of the Alto automatic transmission?

Alto automatic transmission fuel consumption is 5.7 liters per 100 kilometers. Normal fuel consumption values: For cars within 100 kilometers, the general fuel consumption is between 6 to 10 liters, which is considered normal. Different cars have different fuel consumption, and small and medium-sized cars also vary in fuel consumption. The specific analysis should be based on the vehicle. The fuel consumption of motor vehicles will vary depending on the model and driving habits, so it is important to maintain good driving habits while driving. Main methods to reduce fuel consumption: Maintain good driving habits, shift gears frequently, avoid slamming on the brakes and accelerator, and avoid driving on poor road conditions. Cars with different driving habits will have different fuel consumption. During driving, if you frequently accelerate or decelerate sharply, the car's fuel consumption will increase compared to normal. If you use different gears for different road conditions, such as not shifting to L gear or lower gear when going uphill, the car's fuel consumption will increase.
6
1
Share

Where is the license plate 'Hai A' from?

Hai A is the license plate of the Navy Headquarters, belonging to the sixth-generation military vehicle license plate '2004 Style'. The license plate was put into use on December 1, 2004. More information about military license plates is as follows: 1. The license plate is made of pressed aluminum alloy, with a white background. The surface film features an invisible military emblem and serpentine anti-counterfeiting lines. 2. The first character of the prefix is in red, while the rest are in black. The font is an isometric typeface with rounded curves. 3. The license plate has a 7-digit number, with the prefix consisting of a Chinese character followed by one English letter. The first prefix for the Central Military Commission Headquarters is 'Jun'. Army groups no longer use a separate prefix but follow the prefix of their respective military region. The Navy uses 'Hai', and the Air Force uses 'Kong'. The first character of the prefix for each military region is a Chinese character.
9
5
Share

Will Domestic Cars Rust?

Domestic cars can rust, but not all domestic cars will rust. Reasons related to the body design itself: Some cars are not designed with complete structural considerations in mind. There may be sharp corners or dead angles in the sheet metal, leading to insufficient electroplating of the car body. Alternatively, the process design may not have been fully considered, resulting in incomplete or insufficient electroplating and wax injection processes for the sheet metal. Reasons related to the car owner: Car owners may not pay enough attention to paint surface damage. Over time, paint surface damage can lead to rust, which can then spread and cause more extensive damage to the entire paint surface. Reasons related to the manufacturer: Some manufacturers, in pursuit of higher profits and cost savings, use ordinary sheet metal. This can cause cars that should remain free of serious rust for 6-7 years to develop rust within one or two years or even sooner, affecting driving performance.
3
2
Share

How to Adjust Valve Clearance in Diesel Engines?

For a four-cylinder engine with a firing order of 1-3-4-2, all valve clearances can be adjusted by rotating the crankshaft twice. The specific steps are as follows: 1. Open the cylinder head cover and rotate the crankshaft while observing the valve movement of cylinder 4. When the intake and exhaust valves exhibit overlapping movement, it indicates the exhaust top dead center (TDC) of cylinder 4, at which point cylinder 1 is at compression TDC. 2. At this position, you can adjust the intake and exhaust valves of cylinder 1, the intake valve of cylinder 2, and the exhaust valve of cylinder 3, as these valves are completely closed. 3. Then rotate the crankshaft 360 degrees to locate the compression TDC of cylinder 4 using the same method, and adjust the remaining valves. This is the simplest and most practical approach, as most multi-cylinder engines can complete all valve adjustments in two rotations.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.