Why don't sedan cars have rear wipers?

1 Answers
VonIsabella
07/29/25 10:39pm
The reasons why sedan cars do not have rear wipers are as follows: 1. Structurally speaking: Sedan cars do not have a suitable position to install a rear wiper. Hatchbacks generally have their rear glass and rear door integrated, with the wiper pivot installed on the metal door body below the rear door glass. When the rear door is lifted, it does not affect the wiper. However, sedan cars cannot install the wiper pivot on the trunk lid (let alone on the glass). It can be imagined that if it is installed on the trunk lid, when the lid is opened, the glass remains stationary, causing a misalignment between the wiper and the glass, making it unsuitable for installation. The Mazda6 sports version and Hyundai Coupe have rear wipers. Although these two models appear to be sedans, they are actually rear hatchbacks, structurally similar to hatchbacks. Therefore, sedans do not have rear wipers because there is no suitable place to install them, unless they are rear hatchback sedans. 2. From an airflow perspective: The rear window glass of a sedan is less likely to get dirty. For straight-back hatchbacks, the airflow separation point is at the rear of the roof, creating a turbulent low-pressure area behind the entire car. Dirt gets swept up and sticks to the rear window glass, making it dirty and affecting visibility. For sedans, the low-pressure separation point is at the edge of the trunk, only dirtying the rear "butt" without affecting the rear window glass. Additionally, due to the airflow, dirt on the curved rear window glass is blown away. 3. The sedan's trunk blocks the dirty water from the rear wheels: Compared to hatchbacks, sedans have an additional trunk at the rear, which blocks almost all the dirty water generated by the rear wheels. This means only the "butt" gets dirty, and dirty water does not splash onto the rear window. Therefore, the presence of the trunk in sedans significantly reduces the necessity of a rear wiper.
Was this review help?
19
3
Share
More Forum Discussions

What Causes Weak Ignition in Cars?

Here are the reasons for weak car ignition: 1. Pay attention to the battery: Generally, green indicates normal power, white indicates the need for charging maintenance, and red indicates a dead battery (some may use green for qualified, black for low power, and white for battery damage requiring replacement). The lifespan of a battery is typically around two years. If the battery power is found to be low, it should be replaced promptly. 2. Pay attention to the throttle valve body and idle valve: Carbon buildup in the throttle valve body and idle valve can cause difficulty in starting. For vehicles with an idle valve, lightly pressing the accelerator pedal before starting can help ignite the engine, but releasing the pedal may cause immediate stalling. Therefore, it's best to promptly visit a repair shop for cleaning and inspection. Additionally, during maintenance, it's essential to frequently replace the air filter. In northern areas with more dust, the air filter should be replaced every 10,000 kilometers, and even more frequently on sandy or dusty roads. 3. Fuel pressure: To ensure normal engine startup, the residual fuel pressure in the fuel system after the engine is turned off should not be below 2.5–3.5 kg/cm². Otherwise, insufficient pressure will prevent the fuel injector from spraying enough fuel for startup. Repeatedly turning the ignition switch can restore the fuel pressure to normal, making startup much easier. However, it's best to have a professional mechanic inspect the fuel system to rule out any faults. 4. Lubricant quality: As winter approaches, it's important to replace all lubricants, including engine oil, transmission oil, and power steering fluid, as ordinary lubricants become more viscous and less fluid in cold weather, increasing friction resistance and making cold starts difficult. Choosing a slightly less viscous oil can reduce mechanical wear and protect the engine.
9
0
Share

What are the symptoms of a broken gearbox?

The gearbox, commonly referred to as the transmission, can exhibit numerous symptoms if it becomes damaged. These include failure to engage gears, the car not moving when in D gear, and jerking movements. Below is extended information on types of transmissions: 1. AMT Transmission: This is the earliest automatic transmission technology. Its structure is similar to a manual transmission but includes an additional control mechanism to assist the driver with clutch operation and gear shifting. The control mechanism is the most prone to failure; if it malfunctions, the transmission may fail to engage gears or not move when in D gear. 2. AT Transmission: Also known as a torque converter transmission, this automatic transmission is the most mature and widely used. It primarily relies on hydraulics for gear shifting and contains numerous solenoid valves and oil passages. Common faults include solenoid valve failure and oil passage blockage, the latter often caused by prolonged neglect of transmission fluid changes. 3. Dual-Clutch Transmission (DCT): Structurally similar to a manual transmission but with two sets of clutch plates, DCT transmissions are known for their fast shifting, high transmission efficiency, compact size, and light weight, making them currently the most popular. Common issues include clutch overheating or internal control mechanism failure, with dry-type dual-clutch transmissions being particularly prone to overheating. 4. CVT Transmission: Known as a continuously variable transmission, it lacks gears and instead uses two pulleys and a steel belt for speed variation. CVTs generally experience few issues, but over time, the steel belt may slip. Additionally, CVTs are not suitable for use with high-power engines, as this can easily lead to belt slippage.
16
2
Share

How to Open a Car Door?

First, unlock the door by pressing the lock release switch, then pull the interior handle; another method is to pull the interior handle twice in quick succession. Below is a detailed guide on opening car doors: 1. Before opening the door: For the driver, the first thing to do before opening the door is to check the left side mirror to ensure no vehicles are approaching from behind. For passengers sitting in the left rear seat, they should ask the driver to check the rear traffic to confirm it's safe before opening the door. Although it's not recommended for rear passengers to exit from the left rear door, when the right side is blocked, they have no choice but to exit from the left. In such cases, it's essential to first check for oncoming traffic from behind. 2. After opening the door: Once you've confirmed from the side mirror that there are no approaching vehicles, you can proceed to open the door. At this point, it's crucial not to swing the door open abruptly. Instead, open it slightly to create a small gap. Creating this small gap before fully opening the door alerts approaching motorcyclists and non-motorized vehicle riders that 'the door is about to open,' giving them time to avoid it.
3
3
Share

When did Beijing implement the China VI emission standard?

Beijing implemented the China VI emission standard on January 1, 2020. China has divided the China VI standard into two phases: China VIa and China VIb, with implementation dates in 2020 and 2023, respectively. Relevant information about the China VI standard is as follows: 1. Meaning of the China VI standard: The China VI standard refers to the National Sixth Stage Emission Standard for Motor Vehicle Pollutants. 2. Purpose of enacting the China VI standard: To enforce China's environmental protection laws; reduce and prevent air pollution caused by vehicle exhaust, protect China's ecological environment, and safeguard human health.
4
2
Share

What is the best way to break in a new automatic transmission car?

For a new automatic transmission car, the break-in period is generally around 500 kilometers. During this period, it's advisable not to drive too fast, maintaining a speed of 60-70 km/h, and keeping the engine RPM below 2200 for optimal results. Below are the specific details of the break-in period: 1. Mid-break-in period: From 500 to 1000 kilometers, you can gradually increase the speed from 60-70 km/h to 90-100 km/h, while still keeping the RPM below 2500. This can actually help promote the break-in process and allow you to check for any abnormalities during acceleration. 2. Late break-in period: From 1000 to 1500 kilometers, you can further increase the speed to below 120 km/h. The break-in process should be gradual, and it's important not to exceed 3000 RPM.
10
2
Share

What is the solution for Dongfeng Nissan P0846?

Replace the transmission oil. The P0846 fault code in Dongfeng Nissan appears due to unclean transmission oil. Here are the reasons for the P0846 fault code: 1. Transmission failure: This means the dashboard warning light comes on during driving, accompanied by issues such as jerky starts, sluggish gear shifts, delayed throttle response, and inability to accelerate. 2. Intermittent acceleration failure: When the throttle is fully pressed, the RPM needle only swings around 1000, with noticeable jerking during gear changes. Sometimes the RPM drops directly from 2000 to 1000, the engine warning light comes on, and the vehicle vibrates.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.