Why doesn't the shared car move in D gear?

2 Answers
DeJackson
07/29/25 9:19am
Shared car not moving after shifting into drive gear may be due to vehicle damage, or the user failing to successfully unlock the vehicle using the app. The usage cost of shared cars generally consists of two parts: one is the usage time, and the other is the mileage. Relevant information about automatic transmissions is as follows: 1. Introduction: An automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L. 2. Automatic principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume over 10% more fuel than manual transmissions. Whether manual or automatic, the more gears there are, the more fuel-efficient the transmission is.
Was this review help?
3
1
Share
SanDominic
08/12/25 9:24am
I've encountered similar issues when driving shared cars, and it's indeed frustrating when the car doesn't move after shifting to D gear. Most shared cars are electric or hybrid models, which have some special settings. Possible reasons include: First, incorrect operation steps, such as not pressing the brake pedal firmly enough, as the system requires a firm press on the brake to shift gears and start. Second, the APP may not be fully activated. Shared cars need to be unlocked via the APP by scanning a QR code or confirming the rental. If the phone signal is weak or there are unpaid fees in the account, the car will refuse to move for safety reasons. Third, vehicle health issues. When the battery is too low, the BMS system automatically restricts driving to prevent breakdowns, or sensors may detect that a door isn't closed properly or the seatbelt isn't fastened. Fourth, temporary system glitches. Try simple troubleshooting methods: turn off and then on the power, shift gears again, and observe the dashboard prompts. If the problem persists, contact customer service for a quick resolution. Prevention tips: Ensure the APP is updated and the account is in good standing before use, and develop a habit of checking the brake and vehicle status before starting.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What is the diameter of a 19-inch wheel hub in centimeters?

19-inch wheel hub diameter is 48.26 centimeters. A 19-inch wheel hub means the diameter of the wheel hub is 19 inches. According to the unit conversion between inches and centimeters, 1 inch equals 2.54 centimeters, so 19 inches equals 48.26 centimeters. Below is a detailed introduction about it: Wheel hub width: Wheel hub width, also known as the J value of the wheel hub, refers to the cross-sectional width of the wheel hub, which is the distance between the two flanges on either side of the wheel hub. Wheel hub offset: The unit of wheel hub offset (ET) is mm, which refers to the distance from the centerline of the wheel hub to the mounting surface. This parameter can usually be found on the back of the wheel hub.
12
0
Share

Is Parking with Hazard Lights On Considered a Violation?

Yes, it is considered a violation. If a vehicle is parked in a no-parking zone for more than 30 seconds, electronic monitoring devices will automatically capture the violation. Below is a detailed introduction about it: Illegal parking: Refers to situations where a vehicle is parked in violation of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," meaning the vehicle is not parked in the designated area. Stop-and-go: Means that when parking on the roadside, the vehicle should stay close to the right side of the road, and the driver must not leave the vehicle. After picking up or dropping off passengers or loading/unloading goods, the vehicle must immediately leave. No-parking signs: No-parking zones are marked with no-parking signs, and the road surface is also marked with yellow no-parking lines. If a vehicle is parked in a no-parking zone for more than 30 seconds, electronic monitoring devices will automatically capture the violation.
19
3
Share

Why are some car steering wheels on the right side?

Some cars have steering wheels on the right side due to different traffic rules in their respective countries. Currently, there are two main traffic systems in the world: driving on the right side and driving on the left side. Initially, when Karl Benz invented the car, the steering wheel was positioned in the center. However, based on ergonomic principles, over 90% of people are right-handed. To ensure accurate and safe operation of the gear shift and brakes, designers naturally placed the driver's seat on the right side. Factors determining the position of the car steering wheel: The position of the car steering wheel is determined by the traffic rules of each country and is unrelated to the type of vehicle. Automakers produce and market vehicles accordingly based on the region. If a country or region drives on the left, the steering wheel of the cars sold will be on the right side; if a country or region drives on the right, the steering wheel of the cars sold will be on the left side. Asian countries and regions with the driver's seat on the right: Bangladesh, Bhutan, Brunei, India, Indonesia, Japan, Malaysia, Maldives, Nepal, Pakistan, Singapore, Sri Lanka, Thailand, Hong Kong (China), Macau (China).
1
2
Share

What does 'Inspection valid until August 2021' mean?

Inspection valid until August 2021 means that the vehicle's annual inspection is valid until the end of August 2021. Within 90 days before the expiration of the annual inspection validity, the vehicle owner can go to the local vehicle inspection agency for inspection and obtain a new motor vehicle inspection compliance label. Below is a detailed introduction about it: Introduction 1: The motor vehicle owner can apply for an inspection compliance label at the vehicle management office of the registration location within three months before the expiration of the motor vehicle inspection validity period. Introduction 2: If a motor vehicle driven on the road does not display a motor vehicle license plate, does not have an inspection compliance label or insurance label, or does not carry the vehicle registration certificate or driver's license, the traffic management department of the public security organ shall detain the motor vehicle and notify the party to provide the corresponding license plate, label, or complete the corresponding procedures.
5
5
Share

Is the License Plate Selection Process the Same for Used Cars and New Cars?

License plate selection for used cars follows the same process as for new cars. Below is relevant information about vehicle license plate selection: Selection Modes: Both used car and new car online license plate selections share the same pool of available plates. The system offers vehicle owners two selection modes: 20 attempts at self-composed plate numbers and 5 attempts at random selection. Important Notes for License Plate Selection: The processing time for self-selection and one-time selection is 5 minutes. If no selection is made during the first attempt, another attempt can be made after five minutes. When selecting plates, make full use of the selection rules by preparing three preferred plate numbers in advance and entering them in order on the selection machine. When all three entered plate numbers are already taken, you can use the similar-number query function. The selection system will then provide six similar numbers based on the rules of your first entered number, from which you can make your choice.
10
5
Share

What is the appropriate tire pressure for the UY125?

The normal tire pressure range for the Suzuki UY125 is 2.4-2.5 bar. According to the requirements and specifications of the international GBT2978-2008 standard, the standard tire pressure is 2.4-2.5 bar; the reinforced tire pressure is 2.8-2.9 bar; the maximum pressure should not exceed 3.5 bar. Hazards of over-inflated tires: The friction and adhesion of the tires will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear on the central tread pattern, shortening tire life; Increases vehicle vibration, indirectly affecting the lifespan of other components; Excessive stretching of tire cords can reduce tire elasticity, increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more easily punctured, and impacts can cause internal cracks or blowouts, leading to tire failure. Hazards of under-inflated tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, posing safety risks; Increases movement in various parts of the tire, leading to abnormal heat due to excessive rolling; Reduces the functionality of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Dramatically increases friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to blowouts; Increases tire deformation, making the sidewalls prone to cracking and causing flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.