Why doesn't the Santana's air conditioning fan rotate?

Can You Cross a Single Yellow Line?

You must not drive over or cross a single yellow line on the roadside. Crossing any solid line is strictly prohibited. Below is relevant information about single yellow lines: Usage of single yellow lines: Generally, single solid yellow lines are used on roads with four or fewer lanes (two lanes in each direction) and are typically painted in the center of the road. Crossing yellow lines is not allowed under normal circumstances—whether it's a single or double yellow line, as long as it's solid, crossing is strictly prohibited. This includes actions such as overtaking, turning, or making U-turns. Function of single yellow lines: Single solid yellow lines are used to separate opposing traffic flows, distinguishing lanes for different directions and prohibiting vehicles from crossing or driving over the line in either direction. Penalties for crossing a single yellow line: In general, drivers who cross a single yellow line will be fined and receive a 3-point penalty on their license.

19

1

Share

How to Use the Manual Mode in Magotan's Tiptronic Transmission?

To use the manual mode, simply shift the gear lever to the M or S position. Below is a detailed introduction: 1. Overtaking Acceleration Technique: Automatic transmissions are less responsive than manual transmissions when accelerating, especially during overtaking. In D mode, the speed won't increase rapidly by pressing the accelerator hard; it will only shift up sequentially. 2. Downhill Technique: When driving downhill in manual mode, the correct operation is to shift to a lower gear and coast with the gear engaged. In automatic mode, the speed will uncontrollably increase, requiring timely braking while coasting.

14

2

Share

What Causes the EPC Light to Illuminate?

When the EPC light on the dashboard illuminates, the vehicle may have the following issues: 1. Intake system malfunction; 2. Throttle body contamination, excessive carbon buildup; 3. Substandard fuel selection; 4. Abnormal cylinder pressure, poor operating condition; 5. Sporadic faults or false alarms; 6. Valve malfunction, sticking or carbon buildup, etc.; 7. ECU malfunction. The EPC light can illuminate under two circumstances: 1. Yellow warning light: A yellow warning light indicates a caution, meaning certain vehicle systems may have exceeded parameter limits. A yellow light signifies a non-urgent fault. When the vehicle's onboard computer detects an abnormal signal and the yellow warning light comes on, the vehicle can still be driven. 2. Red warning light: If the red warning light illuminates, it directly affects the vehicle's core components and driving safety. In this case, it is important to stop and inspect the vehicle's fault, resolving the issue before continuing to drive.

11

4

Share

How to Turn on Hazard Lights?

There is a button with a red triangle on the vehicle's control panel; press it to turn on the hazard lights. Here is some relevant information: 1. Hazard lights: These refer to the turn signals on the front, rear, left, and right sides of the car, commonly known as hazard warning lights. They are called 'double flash' because both sides light up simultaneously. 2. Hazard warning flashers: Often referred to as emergency flashers (a button with an exclamation mark inside a red triangle, commonly called hazard lights or emergency flashers), they are signal lights used to alert other vehicles and pedestrians that the car is experiencing a special situation.

9

0

Share

Where is the DISP button on the Changan CS15?

The DISP button on the Changan CS15 is located on the steering wheel. By pressing the DISP button, you can access information such as the vehicle's mileage, fuel consumption records, remaining fuel level, and remaining driving range. Below are the specific details of the Changan CS15: 1. Exterior: The CS15 adopts the latest butterfly-wing family front grille. It also features many black high-gloss decorative elements, significantly enhancing the vehicle's refined feel. 2. Interior: The CS15 is equipped with a 7-inch LCD instrument panel and a 10.25-inch central control screen, which integrates the InCall-3.0 smart connectivity system. The interior continues to exude a sporty atmosphere. 3. Powertrain: The Changan CS15 continues to be powered by the Changan EA series 1.5L naturally aspirated engine, with a maximum power output of 78.5kW (107PS) and a peak torque of 145N·m. The transmission system is paired with a 5-speed manual transmission and a 5-speed dual-clutch transmission.

10

4

Share

Why does the naturally aspirated Verano use 0W20 oil?

The reason why the naturally aspirated Verano uses 0W20 oil is that 0W20 has low viscosity and is fuel-efficient. The following is an introduction to oil-related content: 1. Increased fuel consumption: When adding oil to the engine, the oil level should be between the upper and lower limits of the dipstick. If too much oil is added to the engine, the volume will expand as the engine temperature rises, causing increased pressure in the oil chamber, increased operating resistance, reduced car power, and increased fuel consumption. 2. Overfilling oil: If too much oil is added, the crankcase breather pipe may leak oil, the crankcase pressure will increase, and the oil seal will be loosened by the oil pressure, leading to oil leakage. 3. Heat dissipation: Overfilling oil will affect engine heat dissipation.

7

5

Share

Why doesn't the Santana's air conditioning fan rotate?

Can You Cross a Single Yellow Line?

How to Use the Manual Mode in Magotan's Tiptronic Transmission?

What Causes the EPC Light to Illuminate?

How to Turn on Hazard Lights?

Where is the DISP button on the Changan CS15?

Why does the naturally aspirated Verano use 0W20 oil?

What to Do When the Car Jerks After Driving Through Water?

How to Apply for Subject 4 Exam in Another Location?

Is the Power Difference Between 95 and 98 Octane Gasoline Noticeable?

What are the requirements for non-locals to participate in Beijing's license plate lottery?