Why doesn't the Infiniti Q50L have an AC button?

1 Answers
DeMatthew
07/29/25 9:51pm
The AUTO button in the Infiniti Q50L serves as the AC button. Pressing the AUTO button turns on the air conditioning. It intelligently adjusts cooling/heating and fan speed based on the cabin temperature. After activating the air conditioning by pressing the central AC button, you can toggle the cooling function on/off by tapping the snowflake symbol on the lower center display. Below is an introduction to the Infiniti Q50L: 1. The Infiniti Q50L is equipped with two engines: a 3.5L naturally aspirated engine and a 3.7L naturally aspirated engine, both V6 configurations. The 3.5L variant is paired with a hybrid system. 2. The 3.5L V6 naturally aspirated engine delivers 320 horsepower and 338 Nm of peak torque, reaching maximum torque at 5,000 rpm and peak power at 6,800 rpm. It features multi-point fuel injection and an aluminum alloy cylinder head/block. The hybrid system includes an electric motor with 50kW (68hp) and 290 Nm, mated to a 7-speed automatic transmission. 3. The 3.7L V6 naturally aspirated engine produces 351 horsepower and 361 Nm of maximum torque, achieving peak torque at 5,200 rpm and maximum power at 7,000 rpm. This engine also utilizes multi-point fuel injection and aluminum alloy construction, paired with a 7-speed automatic transmission.
Was this review help?
6
4
Share
More Forum Discussions

What Could Be the Reason for a Car Not Starting?

Reasons why a car may not start: 1. Severe carbon buildup inside the vehicle's engine, leading to difficulty in starting and causing idle vibration; 2. Issues with the vehicle's ignition system—it's necessary to check the spark plugs and high-voltage wires. Abnormal operation of the ignition system can result in such situations, causing idle vibration or difficulty in starting; 3. Unstable fuel pressure in the vehicle's fuel system, where the fuel pump fails to supply fuel properly to the vehicle, leading to poor fuel atomization by the engine or inability to open the fuel injectors, resulting in cylinder misfire vibration or failure to start; 4. Faults caused by insufficient engine cylinder pressure—the vehicle's engine has exceeded its service life and thus cannot continue to operate, leading to intermittent idle vibration. In such cases, prompt repair at a service center is necessary.
18
0
Share

How to Adjust the Headlight Height of the Mazda3 Axela?

Method to adjust the headlight height of the Mazda3 Axela: 1. The headlight height adjustment knob of the Mazda3 Axela is located on the plastic panel in front of the driver's left leg, marked with a light symbol; 2. The knob with the light symbol is the headlight height adjustment knob, which can be adjusted to different height levels; 3. To adjust, simply rotate the light adjustment knob up or down to change the headlight height. The Mazda3 Axela is a car produced by Changan Mazda, featuring: 1. Dimensions: length, width, and height of 4582mm, 1795mm, and 1458mm; 2. Powertrain: equipped with 1.5L and 2.0L Skyactiv-G gasoline engines.
14
1
Share

Where to Place the Spare Car Key?

Spare car keys are placed in a small shelf on top of the car. This location is very safe and prevents the keys from falling out, making it a good practice for those who prefer to keep spare keys inside the car. This method avoids potential troubles when the keys are forgotten at home or in the car, offering both convenience and safety. Steps to use the spare key: 1. Locate a small rectangular hole at the end of the car handle, pull the handle outward with your left hand, and insert the spare key into the rectangular hole to remove the lock cover; 2. After removing the lock cover, you will see the keyhole—use the spare key to unlock the car door; 3. Pull the door handle outward and align it with the lock cover interface to insert the lock cover.
17
2
Share

Is the Wuling Hongguang S3 Front-Wheel Drive or Rear-Wheel Drive?

The Wuling Hongguang S3 is rear-wheel drive. Rear-wheel drive vehicles have greater traction, as the rear wheels bear significantly more weight than the front wheels during acceleration, making them less prone to slipping. Therefore, the acceleration performance of rear-wheel drive is better than that of front-wheel drive. In rear-wheel drive vehicles, the rear wheels directly provide ample power, while the front wheels are solely responsible for steering and providing lateral force. This means that even with the same center of gravity, the front wheels of a rear-wheel drive vehicle can achieve more lateral grip. Features of the Wuling Hongguang S3: 1. Exterior: As Wuling's first SUV, the new car breaks away from the design concepts of other MPVs or microvans. The new front face design looks slightly bold, with the headlight cluster connected to the grille, and the fog lights and front bumper design also highlighting a rugged style. 2. Body dimensions: Length, width, and height are 4655mm, 1735mm, and 1780mm, respectively.
1
3
Share

Why does the accelerator feel weak when pressed down?

The reasons why the accelerator feels weak when pressed down: 1. Intake system failure: If there is air leakage or blockage in the intake system, the car will experience reduced power, inability to increase RPM, and body shaking when accelerating; 2. Clutch slipping: The most common phenomenon is that when the accelerator is pressed hard, the RPM rises quickly, but the speed does not increase, and there is a noticeable feeling of weak acceleration; 3. Ignition system failure: Both the ignition coil and spark plugs are wear-prone parts. If the spark plugs' performance declines or inferior spark plugs are used, it can lead to weak acceleration and shaking during acceleration; 4. Fuel system failure: Using low-quality gasoline can easily cause the fuel pump to burn out, catalytic converter failure, piston failure, etc., directly affecting engine power and making it difficult to increase speed.
19
5
Share

How to Brake a Manual Transmission Car?

Methods for braking a manual transmission car: 1. Low-speed braking: Press the clutch pedal, then slowly press the brake pedal until the vehicle comes to a complete stop; 2. Medium-speed braking: Intermittently press the brake pedal, and after the speed drops to 30 km/h, press the clutch pedal, then slowly press the brake pedal until the vehicle stops; 3. High-speed braking: First tap the brake pedal, then slowly press it to reduce speed to 30 km/h, then press the clutch pedal and fully press the brake pedal until the vehicle stops. A manual transmission car uses a manual shift mechanical transmission to adjust speed, meaning you must manually move the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve speed change. The gear lever can only be moved when the clutch pedal is pressed.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.