Why Doesn't the Horn of a New Energy Vehicle Work?

2 Answers
JasmineRose
09/07/25 5:28am
Check whether the battery voltage is normal. Automobile License Plate Management Regulations: According to the national new energy vehicle license plate management regulations, if a motor vehicle is classified as a new energy vehicle, only new energy license plates can be issued when handling registration, transfer, and other registration procedures, and blue license plates cannot be issued. For new energy vehicles that already have blue license plates, they can continue to use the blue license plates or choose to apply for new energy vehicle license plates. Introduction to New Energy Vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources, or conventional vehicle fuels with new vehicle power devices, integrating advanced technologies in vehicle power control and driving, forming vehicles with advanced technical principles, new technologies, and new structures. New energy vehicles include hybrid electric vehicles, fuel cell electric vehicles, pure electric vehicles, and other new energy vehicles.
Was this review help?
16
2
Share
JulietDella
09/19/25 4:45am
As a long-time driver of new energy vehicles, I've encountered the issue of a non-functioning horn several times. The most common problem is aging or damage to the horn itself, where internal component wear prevents sound production—this occurs more frequently in humid conditions, such as after rain when water ingress causes short circuits. Another major cause is blown fuses or poor wire connections, and bugs in the complex electronic systems of electric vehicles, like battery management and control units, can also affect the horn circuit. Once on the highway, my horn suddenly failed, and it turned out to be an intermittent fault caused by a failed software update. It's crucial to promptly visit a professional repair shop for inspection—don't underestimate this issue, as it can be life-saving in critical moments during urban traffic congestion or on pedestrian walkways. The silent design of electric engines is environmentally friendly, but the lack of horn sound makes it harder for pedestrians and cyclists to detect danger. Therefore, I recommend testing the horn monthly and avoiding prolonged exposure to rain to prevent rust, thereby extending its lifespan and reducing accidents.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

What Causes Vehicle Vibration at 120 km/h?

The causes of vehicle vibration at 120 km/h are: 1. Uneven brake disc surface with excessive radial runout; 2. Rim deformation; 3. Excessive high or low tire pressure; 4. Significant wheel alignment data deviation; 5. Abnormal tire wear; 6. Tire dynamic balance failure; 7. Damper failure; 8. Engine power failure. The solutions for vehicle vibration at 120 km/h are: 1. Inspect and adjust front wheel alignment angles and toe-in; 2. Perform wheel dynamic balance inspection; 3. Adjust tire pressure or replace tires; 4. Perform driveshaft dynamic balance inspection; 5. Choose high-quality engine oil; 6. Inspect engine ignition system.
8
5
Share

How Many Liters of Oil Does the Camry Transmission Need?

The amount of transmission oil required for a Camry depends on the oil change method: 1. Approximately 6 liters for conventional gravity oil change; 2. Around 12 liters for machine exchange oil change. The Camry is a mid-size sedan with the following dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60 liters, and trunk capacity 593 liters. It is equipped with a 2.0L naturally aspirated engine producing maximum power of 131kW at 6600rpm and peak torque of 210Nm between 4400-5200rpm, paired with a 10-speed continuously variable transmission.
4
1
Share

How to Determine if a Solenoid Valve is Damaged?

Determining whether a solenoid valve is damaged can be done through the following methods: 1. After energizing the coil, insert a metal tool directly into the coil hole and check if the metal tool can be attracted; 2. Measure the resistance of the coil with a multimeter. If the resistance shows infinity or is very small, it can be determined that the valve is damaged. A solenoid valve is an electromagnetically controlled industrial device used as an automated basic component for controlling fluids. It belongs to the category of actuators and can work with different circuits to achieve the desired control, ensuring precision and flexibility. Solenoid valves can be classified into: 1. Direct-acting solenoid valves; 2. Step-by-step direct-acting solenoid valves; 3. Pilot-operated solenoid valves.
5
5
Share

What Does Tire Size Represent?

Tire size represents the section width and the aspect ratio as a percentage, followed by the tire type code, rim diameter, load index, and speed rating. Taking 175/70R14 77H as an example, 175 indicates the tire width is 175mm, 70 means the tire's aspect ratio is 70%, the rim diameter is 14 inches, the load index is 77, and the speed rating is H. The method to measure tire size is: 1. Use a metal tape measure to wrap around the tire along the centerline of the tread or the highest point near the centerline to measure the outer circumference; 2. Select a sidewall area without markings, decorative lines, or scuff guards, and use a vernier caliper or calipers to measure the section width at approximately four equally spaced points around the tire; 3. Calculate the data accordingly.
7
2
Share

What is the situation with the car tire pressure warning?

Car tire pressure warning occurs due to the following reasons: 1. Air leakage from the tire or valve; 2. Wheel hub deformation leading to reduced tire sealing performance; 3. Long-term overloading of the vehicle causing uneven tire stress; 4. Thermal expansion and contraction resulting in insufficient tire pressure. Tire pressure refers to the air pressure inside the tire, with a normal monitoring range between 2.2 and 2.5 bar. Methods for monitoring tire pressure include: 1. Direct tire pressure monitoring; 2. Indirect tire pressure monitoring; 3. Using a smart tire monitoring system for detection. The impacts of low tire pressure are: 1. Increased contact area between the tire and the ground, leading to abnormal tire temperature; 2. Severe deformation of the tire sidewall, accelerating the aging of internal steel wires and fabric layers, which may cause a blowout; 3. Increased fuel consumption; 4. Reduced tire lifespan.
9
1
Share

What are the normal high and low pressures for a car air conditioner?

The normal high pressure for a car air conditioner is between 15 to 18 bar, and the low pressure is between 1.0 to 2.5 bar. Solutions for excessively high pressure in the car air conditioner include: 1. Clean the dust and dirt from the air vents and the interior of the cabin; 2. Regularly check the refrigerant level in the air conditioning system to ensure it is normal; 3. Inspect the compressor belt for proper condition; 4. Check if the refrigerant level is sufficient and replenish it in time. Solutions for excessively low pressure in the car air conditioner include: 1. Refill the air conditioning refrigerant according to the manufacturer's standards; 2. Inspect and repair any leaks in the air conditioning system, replacing any leaking components.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.