Why doesn't the Honda Civic's horn sound when locking the car?

Why is there no response when twisting the electric bike throttle?

You can prop up the bike. Rotate the rear wheel to check for noticeable resistance. If there is resistance, it can be determined that the controller or motor is faulty, and you need to visit an after-sales service or repair shop for repairs. Below are some precautions for using an electric bike: Regular Charging: Generally, the battery starts discharging after leaving the factory. If unused for one or two months, the battery will be completely drained. Over time, this will reduce battery performance and range. Therefore, even if not in use, charge the battery every half month to one month. Fully Charge Before Use: Many owners often forget to charge after use, forcing them to rely on fast charging when in urgent need. While one fast charge may not have a significant impact, frequent use can create poor memory in the battery, making it unable to fully charge in the future, affecting range and lifespan. Simply put, a fully charged standard battery can run for about thirty kilometers, whereas fast charging may reduce the range to just over ten kilometers. Frequent use of fast charging can negatively impact battery performance and shorten its lifespan.

5

Share

How long after adding battery restoration fluid can the battery be charged?

Generally 16 hours, because after adding water, it needs to fully mix with the original battery fluid (dilute sulfuric acid) to ensure the quality of battery charging. Below are the specific classifications of automotive batteries (also known as storage batteries): Conventional Battery: The plates of conventional batteries are made of lead and lead oxide, with the electrolyte being an aqueous solution of sulfuric acid. Its main advantages are stable voltage and low cost; the disadvantages are low specific energy (i.e., the amount of electrical energy stored per kilogram of battery), short service life, and frequent daily maintenance. Dry-charged Battery: Its full name is dry-charged lead-acid battery. Its main feature is that the negative plate has a high capacity for storing electricity. In a completely dry state, it can preserve the obtained charge for up to two years. When in use, you only need to add the electrolyte and wait for 20-30 minutes before it can be used. Maintenance-free Battery: Due to its structural advantages, maintenance-free batteries consume very little electrolyte and basically do not require the addition of distilled water during their service life. They also feature resistance to vibration, high temperatures, small size, and low self-discharge. The service life is generally twice that of conventional batteries.

5

Share

What brand of engine oil is used for the Chery Arrizo 5?

Chery Arrizo 5 originally uses SM grade 10W-40 fully synthetic engine oil. If you want to change the engine oil during later maintenance, you can choose fully synthetic engine oils produced by brands such as Castrol, Mobil, and Shell. Recommended options include Chery Mobil Super SM5W30, Shell Helix Ultra 5w-30, Mobil 1, Mobil SN5w30, Valvoline SynPower GF-5 5W30, and Shell Penzzoil CP8-SN-5w30. The Chery Arrizo 5 maintenance manual recommends fully synthetic 5W30 engine oil. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The second number represents the kinematic viscosity of the oil at 100°C. A higher number means the oil can maintain viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Chery Arrizo 5 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Loosen the oil drain plug with a wrench and use an oil pan to catch the old oil until no more oil flows out. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain; Remove the oil filter with a special wrench; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add new engine oil through the filler port on the engine valve cover, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to ensure the engine oil level is within the standard range.

13

0

Share

What are the differences between the J6P and JH6?

The FAW J6P is currently one of the most mature mainstream heavy-duty trucks in China. The JH6, on the other hand, can be understood as a transitional product between the J6 and J7, hence it is also referred to as the J6.5 or the half-generation J6. Each has its own advantages, and the choice depends on the owner's personal preference. If you prioritize maturity and stability, the J6P is a good option, while if you want to experience new features and more functionality, the JH6 is a better choice. The main differences between the J6P and JH6 are as follows: 1. Exterior: When the J6P was first launched, its rugged appearance was hard for many truck enthusiasts to accept. However, it has proven to be a very enduring design, now considered a classic, and has directly inspired the family look of the J6M/J6L/J6F series. The JH6, on the other hand, has a more aggressive and international appearance, with an overall raised cab that makes it look taller. 2. Details: The three speed indicator lights in the middle of the J6P's front are not present on the JH6. The JH6's headlights appear more vibrant than the J6P's and come with LED contour lights, giving it a distinctive look. Due to current policy requirements, both trucks are equipped with front underrun protection beams. The JH6's front bumper is lower to the ground and hidden within the bumper, while the J6P's front bumper is exposed. 3. Transmission: Both trucks use the FAW CA12TAX210M 12-speed transmission and the FAW 457 welded axle. The J6P has a rear axle ratio of 4.111, while the JH6's rear axle ratio is 3.7. 4. Frame: The JH6 uses a single-layer frame measuring 300x80x8, while the J6P uses a double-layer frame measuring 300X80X(8+5), providing better suitability for heavy-load demands. 5. Suspension: The JH6 features a few-leaf spring structure both front and rear, with three parabolic leaf springs in the front and four in the rear. The J6P, however, uses multi-leaf spring structures both front and rear, offering greater load-bearing capacity than the JH6. 6. Weight reduction: The JH6 uses aluminum alloy air reservoirs, while the J6P uses iron ones. 7. Cab: The JH6's cab is raised, achieving a near-flat floor structure inside, which provides more spacious interior space and better comfort. Additionally, the JH6's A-pillar angle is much smaller than the J6P's, resulting in superior visibility compared to the J6P.

10

1

Share

What do N, P, and D gears mean?

Here are the detailed explanations of N, D, and P gears: 1. N gear (Neutral): When shifted into neutral, the planetary gear system idles and cannot output power. 2. D gear (Drive): When the gear selector is in this position, the hydraulic control system automatically engages the corresponding forward gear circuit based on throttle opening and vehicle speed signals. It can automatically shift up or down according to driving speed, realizing automatic transmission function. 3. P gear (Park): After shifting into P gear, a mechanical device locks the rotating parts of the car's tires, preventing the vehicle from moving.

11

5

Share

What Causes the Shaking During Emergency Braking in the Tenth-Generation Civic?

The shaking during emergency braking in the tenth-generation Civic is caused by: 1. Friction between the wheels and the braking system; 2. Rust formation between the brake discs and brake pads, leading to friction. When driving an automatic transmission model, it is essential to release the brake quickly and keep the braking within a reasonable range to develop good driving habits. The tenth-generation Civic (CIVIC) offers models including a three-door hatchback, a hardtop coupe, a hybrid version, and a five-door sedan. The dimensions of the tenth-generation Civic are 4649mm in length, 1800mm in width, and 1416mm in height.

15

2

Share

Why doesn't the Honda Civic's horn sound when locking the car?

Why is there no response when twisting the electric bike throttle?

How long after adding battery restoration fluid can the battery be charged?

What brand of engine oil is used for the Chery Arrizo 5?

What are the differences between the J6P and JH6?

What do N, P, and D gears mean?

What Causes the Shaking During Emergency Braking in the Tenth-Generation Civic?

What are the accuracy classes of electronic truck scales?

Are Motorcycles and Electric Motorcycles Banned?

Is Head Movement Required for Straight-Line Driving?

Can I get a manual transmission driver's license after passing the automatic transmission test?